Announcement

Collapse
No announcement yet.

EX58-UD3R Power cycle

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    EX58-UD3R Power cycle

    First of all sorry for my english, im from Chile and i havent used it in quite a while.

    Well for the last 4 days my computers starts to power cycle everytime i turn it on. It doesnt do it when i restart it, only when it starts from cold. It started after several unespected shutdowns. To archieve boot i reset the Cmos and turn it on and off over and over till (randomly i think) it boots. Iv noticed that the times it power cycles all but the cpu fan start normally.

    My specs:
    EX58-UD3R 1.7
    Intel 930
    BFG NVIDIA GTX 275
    Corsair 6GB 1333
    WD10 EARS 1tb SATA
    Atheros AR5007G wireless lan

    Thanks in advance

    EDIT: My PSU is a TopPower Silent Blue 750w and i updated to the lastest BIOS
    Last edited by Ravel; 12-28-2010, 09:29 AM.
    Tags: None
  • #2
    Re: EX58-UD3R Power cycle

    what dram and qpi/vtt voltages are you using?
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/[email protected] 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

    Comment

    • #3
      Re: EX58-UD3R Power cycle

      Keep in mind force shutting it on/off several times in a row or clearing the CMOS is going to cause that every time because the board will think the overclock or settings failed, so it will shut down to load fail safe settings.

      Sounds like you need to set your settings manually since auto is not working.

      Can you please link us to your memory or give the model #

      Comment

      • #4
        Re: EX58-UD3R Power cycle

        Hi, thanks for your responses.

        Here is the link to the memories NCIX.com - Buy Corsair XMS3 TR3X6G1333C7 6GB DDR3 3X2GB DDR3-1333 CL 7-7-7-20 1T Core i7 Memory Kit - TR3X6G1333C7 In Canada.

        I havent overclocked the computer or anything, everything is set to default.

        Comment

        • #5
          Re: EX58-UD3R Power cycle

          try with dram voltage set to spec either 1.5v or 1.66v,then set qpi/vtt voltage to 1.35000v see if that helps(you can lower qpi/vtt voltage later if its stable)
          Gigabyte z77x UP4-TH F11c Modded Bios
          Intel i7 3770k 24/[email protected] 1.38v Turbo llc +0.165v dvid multithreading enabled
          Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
          Thermalright Silver Arrow Cpu Cooler
          1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
          1xSamsung f4 HD204UI 2tb hard drive Storage
          Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
          Razer Lycosa Keyboard
          Logitech X-530 5.1 Speakers
          Lite-On iHAS124-19 24x Sata DVDRW
          K-World Hybrid DVB-T 210SE Digital T.V Card
          L.G E2260V L.E.D 1920x1080 Monitor
          Xfx Pro 750w silver rated Psu 80+
          Fractal Arc Midi Case

          http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
          http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

          Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
          Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

          Comment

          • #6
            Re: EX58-UD3R Power cycle

            the voltage is set at 1.5, should i changed to 1.66?

            Comment

            • #7
              Re: EX58-UD3R Power cycle

              is the ram 1.5v? check on box or on the side of the ram,if its 1.5v then leave it as it is,if its 1.65 then set to 1.66v in bios

              dont run it at 1.66v if its designed to run at 1.5v though
              Gigabyte z77x UP4-TH F11c Modded Bios
              Intel i7 3770k 24/[email protected] 1.38v Turbo llc +0.165v dvid multithreading enabled
              Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
              Thermalright Silver Arrow Cpu Cooler
              1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
              1xSamsung f4 HD204UI 2tb hard drive Storage
              Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
              Razer Lycosa Keyboard
              Logitech X-530 5.1 Speakers
              Lite-On iHAS124-19 24x Sata DVDRW
              K-World Hybrid DVB-T 210SE Digital T.V Card
              L.G E2260V L.E.D 1920x1080 Monitor
              Xfx Pro 750w silver rated Psu 80+
              Fractal Arc Midi Case

              http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
              http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

              Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
              Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

              Comment

              • #8
                Re: EX58-UD3R Power cycle

                The memories are 1.5v. I dont know if its of any use but v noticed that when i shutdown the computer it tries to turn on again but inmediatly turns off again

                Comment

                • #9
                  Re: EX58-UD3R Power cycle

                  Ok today i reconected a hard drive that someone here disconected and it looks like everything is now ok. Kinda weird huh?

                  Comment

                  • #10
                    Re: EX58-UD3R Power cycle

                    Nice to see you found the proble, ya that is kinda odd too but at least you solved it now!

                    Comment

                    Previous template Next
                    Working...
                    X