Need Advice for my G31M-ES2L,1.5GB DDR2 533,Gigabyte Ge Force 210 1GB DDR2

[bandirock]

Hi all...I'm from malaysia and love OC!!!I really need help with my setup

CPU :


MEMORY and SPD




MAINBOARD


Bios Setting
Robust Graphics Booster___________ [Auto]
CPU Clock Ratio ____________ [15]
CPU Host Clock Control_ [Enabled]
CPU Host Frequency (MHz)__________ [254]
PCI Express Frequency (Mhz)_______ [145]
System Memory Multiplier (SPD)____ [3.33]
DRAM Timing Selectable_______ SPD __ [Auto]
Performance Enhance = [Standard]

System Voltage Control____ [Manual]
DDR2 OverVoltage Control__ [+0.2V]
FSB OverVoltage Control___ [+0.1V]
CPU Voltage Control_______ [1.343] 1 click above normal 1.33750V

AM I STUCK HERE???

currently running at 3.811Ghz with max 65C temp...
play NFS:SHIFT sometimes the game slow down a little then back to normal then again.
and GPU running stock clock..

[Chike]

Re: Need Advice for my G31M-ES2L,1.5GB DDR2 533,Gigabyte Ge Force 210 1GB DDR2

Post your settings using the template in this post (for the G31M-ES2L.)
Also provide details abut your memory specs and CPU model number.
You can post screen capture of CPU-Z's CPU, Motherboard, and SPD tabs (it is possible to run several instances of CPU-Z)

[Lsdmeasap]

Re: Need Advice for my G31M-ES2L,1.5GB DDR2 533,Gigabyte Ge Force 210 1GB DDR2

Why is this so high?
PCI Express Frequency (Mhz)_______ [145]

That's going to hurt your graphics card and hard drives if that is really the correct amount you are using. If it is I'm surprised you can boot :)

[Chike]

Re: Need Advice for my G31M-ES2L,1.5GB DDR2 533,Gigabyte Ge Force 210 1GB DDR2

I'd try to set memory multiplier auto, 2.66 or 2.5 and deal with the memory later.
Try more Vcore. VID range is up to 1.425v just watch over the temperature.
Are you using the built-in graphics or an add-on card?

Please refrain from editing posts, always reply in a new post.

[bandirock]

Re: Need Advice for my G31M-ES2L,1.5GB DDR2 533,Gigabyte Ge Force 210 1GB DDR2

Why is this so high?
PCI Express Frequency (Mhz)_______ [145]

That's going to hurt your graphics card and hard drives if that is really the correct amount you are using. If it is I'm surprised you can boot :)

i still can boot and i see different respond from 100 till 145...but i drop it to 100 already

i using pci-e Gigabyte N210d2-1GI (Geforce 210 with GT216 chip)but i not sure if rite i use nvidia inspector



i tried guve more vcore...when reach some point the score drop...should i go to the last Vcore b4 it drop or?

[bandirock]

Re: Need Advice for my G31M-ES2L,1.5GB DDR2 533,Gigabyte Ge Force 210 1GB DDR2

i already up the Vcore to 1.406V and hit 68C with Thermal OFF and the arithmatic test score seem more stable...but i dont think i can pass the occt test....hahaha..and is 68 hot enough to fry my cpu?

[Chike]

Re: Need Advice for my G31M-ES2L,1.5GB DDR2 533,Gigabyte Ge Force 210 1GB DDR2

Intel says Tcase 67.7C, are you using stock cooler?
Did you try to lower memory multiplier?

[bandirock]

Re: Need Advice for my G31M-ES2L,1.5GB DDR2 533,Gigabyte Ge Force 210 1GB DDR2

Intel says Tcase 67.7C, are you using stock cooler?
Didi you try to lower memory multiplier?

ouch...i cant change the multiplier....
i using P4 531 3Ghz Presscott...

and i use coolermaster hyper 101...i think just a little upgrade then the stock...

and is there any way for me to change the multiplier?

and why if i set my Vcore to 1.406V in monitor just run 1.344V?power supply problem?

[Chike]

Re: Need Advice for my G31M-ES2L,1.5GB DDR2 533,Gigabyte Ge Force 210 1GB DDR2

System Memory Multiplier (SPD)____ [3.33] << change to 2.66 or 2.5

[bandirock]

Re: Need Advice for my G31M-ES2L,1.5GB DDR2 533,Gigabyte Ge Force 210 1GB DDR2

System Memory Multiplier (SPD)____ [3.33] << change to 2.66 or 2.5

already change it...

[Lsdmeasap]

Re: Need Advice for my G31M-ES2L,1.5GB DDR2 533,Gigabyte Ge Force 210 1GB DDR2

The CPU Voltage drops from what you set in the BIOS, and from Idle to Load, that is by Intel design.

What cooler are you using?

[bandirock]

Re: Need Advice for my G31M-ES2L,1.5GB DDR2 533,Gigabyte Ge Force 210 1GB DDR2

The CPU Voltage drops from what you set in the BIOS, and from Idle to Load, that is by Intel design.

What cooler are you using?

i using cooler master 101 heat sink with 2 fan....
max 69C at 3.85Ghz (257 FSB X 15)

i tried for 258 but occt failed....that's the max for my rig...
waiting my ocz DDR2 800Mhz then try to up again...
can i reach 4Ghz above?