Announcement
Collapse
No announcement yet.
I need help with making my newly built PC stable
Collapse
X
-
Re: I need help with making my newly built PC stable
first i would update to the latest bios
what qpi/vtt voltage are you using? try clearing cmos by removing mb battery for 30mins,it might help booting past win logon screen + you can put in the windows installation disc and do a start up repair,crashing might have corrupted either the cmos or start upLast edited by wazza300; 11-24-2010, 07:01 PM.Gigabyte z77x UP4-TH F11c Modded Bios
Intel i7 3770k 24/[email protected] 1.38v Turbo llc +0.165v dvid multithreading enabled
Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
Thermalright Silver Arrow Cpu Cooler
1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
1xSamsung f4 HD204UI 2tb hard drive Storage
Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
Razer Lycosa Keyboard
Logitech X-530 5.1 Speakers
Lite-On iHAS124-19 24x Sata DVDRW
K-World Hybrid DVB-T 210SE Digital T.V Card
L.G E2260V L.E.D 1920x1080 Monitor
Xfx Pro 750w silver rated Psu 80+
Fractal Arc Midi Case
http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
http://www.youtube.com/user/warren304#p/u Visit Me On Youtube
Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!
-
Re: I need help with making my newly built PC stable
I have updated to F4, didn't do F5 because it was a beta. Which ones are the qpi/vtt voltages? From memory (using a laptop because im not at home) i have everything set to auto (1.5V) and have frenquency of memory at 1333MHz
Comment
-
Re: I need help with making my newly built PC stable
its in the m.i.t section scroll down to the bottom of the page,set dram voltage to ram spec,and qpi/vtt to atleast 1.35v for 12gb and then try,you might need more,if your unsure read the mb manual it will show you where qpi/vtt voltage is and screenshots,just look in the m.i.t section carefully and you will see it
i would try f5 even if its beta its safe to use,it might help with your ssd tooGigabyte z77x UP4-TH F11c Modded Bios
Intel i7 3770k 24/[email protected] 1.38v Turbo llc +0.165v dvid multithreading enabled
Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
Thermalright Silver Arrow Cpu Cooler
1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
1xSamsung f4 HD204UI 2tb hard drive Storage
Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
Razer Lycosa Keyboard
Logitech X-530 5.1 Speakers
Lite-On iHAS124-19 24x Sata DVDRW
K-World Hybrid DVB-T 210SE Digital T.V Card
L.G E2260V L.E.D 1920x1080 Monitor
Xfx Pro 750w silver rated Psu 80+
Fractal Arc Midi Case
http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
http://www.youtube.com/user/warren304#p/u Visit Me On Youtube
Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!
Comment
-
Re: I need help with making my newly built PC stable
I am unsure of the RAM voltage spec because on the description it says 1.65V but in the manual http://www.corsair.com/_datasheets/HX3X12G1333C9.pdf, can you have a look and tell me what you think it should be set for. Also with the boot i was planninh on doing a full re-install because from exsperience the repair just makes everything worse rather the actually repairing it
Comment
-
Re: I need help with making my newly built PC stable
that rams rated at 1.5v so set dram voltage to that in the bios,i would try start up repair first,you have nothing to lose,it should repair just the start up and save you having to re-install,are you using ahci mode for you ssd too?that will improve drive performance alot
if you do re-install set to ahci mode in bios before windows installation,thats if you havnt allreadyLast edited by wazza300; 11-24-2010, 07:22 PM.Gigabyte z77x UP4-TH F11c Modded Bios
Intel i7 3770k 24/[email protected] 1.38v Turbo llc +0.165v dvid multithreading enabled
Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
Thermalright Silver Arrow Cpu Cooler
1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
1xSamsung f4 HD204UI 2tb hard drive Storage
Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
Razer Lycosa Keyboard
Logitech X-530 5.1 Speakers
Lite-On iHAS124-19 24x Sata DVDRW
K-World Hybrid DVB-T 210SE Digital T.V Card
L.G E2260V L.E.D 1920x1080 Monitor
Xfx Pro 750w silver rated Psu 80+
Fractal Arc Midi Case
http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
http://www.youtube.com/user/warren304#p/u Visit Me On Youtube
Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!
Comment
-
Re: I need help with making my newly built PC stable
havn't exactly changed much of the settings in bios so no i havn't set for ahci mode, where about in the bios is that?, ok so the auto is set for 1.5v already so that fine runnin 1333MHz? So i will set the qpi/vtt to 1.35v and repair so i can try get in and flash bios to F5. I have been reading up about "uncore clock radio frenqency" should i be changing that?
Comment
-
Re: I need help with making my newly built PC stable
its best set dram manually to 1.5v even if its 1.5v on auto,then if you decide to overclock or anything auto wont overvolt the ram ect,uncore should be ok on auto but set manually if you want,to work it out its whatever the memory multiplier spd is then add one to it,so for example the mem multiplier is 8x the uncore would be 17x
i can help you enable ahci without reinstalling windows later if you manage to fix start up,if you do end up reinstalling windows then look in the bios i think its in integrated perepherals not sure though unless i look,basically any setting you see in ide,change it to ahci,theres only two options that display ide so set them to ahci,look through each page carefullyGigabyte z77x UP4-TH F11c Modded Bios
Intel i7 3770k 24/[email protected] 1.38v Turbo llc +0.165v dvid multithreading enabled
Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
Thermalright Silver Arrow Cpu Cooler
1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
1xSamsung f4 HD204UI 2tb hard drive Storage
Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
Razer Lycosa Keyboard
Logitech X-530 5.1 Speakers
Lite-On iHAS124-19 24x Sata DVDRW
K-World Hybrid DVB-T 210SE Digital T.V Card
L.G E2260V L.E.D 1920x1080 Monitor
Xfx Pro 750w silver rated Psu 80+
Fractal Arc Midi Case
http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
http://www.youtube.com/user/warren304#p/u Visit Me On Youtube
Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!
Comment
-
Re: I need help with making my newly built PC stable
Ah yes actually i do know where that is in the bios, don't think speed is the main concern at the moment though. Just remind me the memory multiplyer is in the bios isn't it? Just so i can double check the uncore on auto is set to the right setting
Comment
-
Re: I need help with making my newly built PC stable
yes all those settings are in the bios,for 12gb and 1600mhz speed you would need even more qpi/vtt voltage,its harder to get 12gb stable but not impossible,look for spd system memory multiplier,click it and you will see the ram speed and a set of multipliers in 8x 10x 12x ect each of those raises and lowers the ram speed,if you set it higher than rated ram speed though it wont boot up
so dram 1.5v
qpi/vtt 1.35v
uncore freq if ram multiplier is 8x will be 17x (twice whatever the mem multi is plus one)Gigabyte z77x UP4-TH F11c Modded Bios
Intel i7 3770k 24/[email protected] 1.38v Turbo llc +0.165v dvid multithreading enabled
Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
Thermalright Silver Arrow Cpu Cooler
1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
1xSamsung f4 HD204UI 2tb hard drive Storage
Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
Razer Lycosa Keyboard
Logitech X-530 5.1 Speakers
Lite-On iHAS124-19 24x Sata DVDRW
K-World Hybrid DVB-T 210SE Digital T.V Card
L.G E2260V L.E.D 1920x1080 Monitor
Xfx Pro 750w silver rated Psu 80+
Fractal Arc Midi Case
http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
http://www.youtube.com/user/warren304#p/u Visit Me On Youtube
Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!
Comment
-
Re: I need help with making my newly built PC stable
Actually it is all comming back to me, i have set the multplyer to 10x for 1333MHz which was the standard on the manual i sent before. So for those settings above will the 1.35v will be sufficent?
Comment
-
Re: I need help with making my newly built PC stable
for 10x ram multi uncore freq will be 21x,i dont know untill you try it and whether or not you see full 12gb or 12gb ram 8gb usable,then you would need to try more qpi/vtt and test ect anything from 1.3-1.4v for qpi/vtt and 12gb of ramGigabyte z77x UP4-TH F11c Modded Bios
Intel i7 3770k 24/[email protected] 1.38v Turbo llc +0.165v dvid multithreading enabled
Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
Thermalright Silver Arrow Cpu Cooler
1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
1xSamsung f4 HD204UI 2tb hard drive Storage
Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
Razer Lycosa Keyboard
Logitech X-530 5.1 Speakers
Lite-On iHAS124-19 24x Sata DVDRW
K-World Hybrid DVB-T 210SE Digital T.V Card
L.G E2260V L.E.D 1920x1080 Monitor
Xfx Pro 750w silver rated Psu 80+
Fractal Arc Midi Case
http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
http://www.youtube.com/user/warren304#p/u Visit Me On Youtube
Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!
Comment
-
Re: I need help with making my newly built PC stable
Ok cheers will try all of that tonight, any other hints that could help? more the better, ah and just going back to the failing boot/shutdown, for somereason windows installer has put the 100MB partition on my 1.5TB driver rather then the SSD which i chose to install the O.S on?
Comment
-
Re: I need help with making my newly built PC stable
i would start over,unplug you wd drive,and just plug your ssd into blue intel port0,set all the bios up and ahci,then install win7,after its all installed plug your wd drive into port1Gigabyte z77x UP4-TH F11c Modded Bios
Intel i7 3770k 24/[email protected] 1.38v Turbo llc +0.165v dvid multithreading enabled
Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
Thermalright Silver Arrow Cpu Cooler
1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
1xSamsung f4 HD204UI 2tb hard drive Storage
Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
Razer Lycosa Keyboard
Logitech X-530 5.1 Speakers
Lite-On iHAS124-19 24x Sata DVDRW
K-World Hybrid DVB-T 210SE Digital T.V Card
L.G E2260V L.E.D 1920x1080 Monitor
Xfx Pro 750w silver rated Psu 80+
Fractal Arc Midi Case
http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
http://www.youtube.com/user/warren304#p/u Visit Me On Youtube
Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!
Comment
-
Re: I need help with making my newly built PC stable
Yea thats what i was thinking, do the windows updates for windows 7 matter that much, i know xp won't really work without most but should it be fine without any just for tests while i do everything you have given me today, also when i plug my WD back in will the original 100MB parition mess up the new one on the SDD ( so i can get into windows and delete the dodgy one)
Comment
Comment