Hi,i'm looking for this couse there is apsolute big vdroop on my board...for exemple,my quad for 3.9/4 Ghz needs only 1.32/1.33 vcore ..but because of the vdroop i must set it in the range of 1.34v-1.38v because of the vdroop it goes to 1.328v(my final point),and it gives my a few extra temperature degrees. Can anyone help me with this? (loadline calibration is out of the question couse it works the same)
Announcement
Collapse
No announcement yet.
x48-ds4 vdroop mod
Collapse
X
-
Re: x48-ds4 vdroop mod
Mod you need is the same as this one
GB X38-DQ6 Vdroop mod - COMEX 2010 | VRForums - Singapore IT & Lifestyle Central
Here is an easier one
Gigabyte X38(T)-DQ6 voltmod thread - i4memory.com - different look at memory
Not worth it for a few degrees I would say, especially at the voltages you are using now (Not much)
Comment