GA-H55M-S2H MOBO Can't load Windows 7

[Ziggy52555]

Hi there, I've just built this computer GA-H55M-S2H MOBO running the Intel i5-750, 4 GB (2X2gb) DDR3 1333 PNY. Here's the problem, when loading Windows 7 Professional 32-bit, like alot of people it seems to take forever, but in my case I only get to the starting setup and after 6-8 minuter there the cursor quits going around and around, and I'm frozen. All parts are new and here is what I've done so far. Replaced Motherboard (with same type), Tried 2 different PCIe Video cards, Tried 2 different HDD's. I've ran the disk in an older computer from the desktop and I get to the EULA in less than 5 minutes, I've never gotten that far in this new system. I've used 3 different memory programs to test the RAM, each time it shows everything is OK. I've taken voltage reading at the power supply (again everything is OK). Additionally I've cleared BIOS, and loaded default settings. Also I forgot to mention I've done the thing with only using 1 stick of RAM at the slot closest to the processor, back and forth and the slot away from the processor still no change. And post lights like everyone else is green/green/amber/red... Any help would be appricated, Thanks

[wazza300]

Re: GA-H55M-S2H MOBO Can't load Windows 7

try disabling floppy drives from the bios and boot order,then try installing

[Lsdmeasap]

Re: GA-H55M-S2H MOBO Can't load Windows 7

Yes, this is the issue most likely!

Please go into Standard CMOS page and at the bottom set "A Drive" to none. Then go into Advanced BIOS features and remove floppy from the 1, 2, 3 boot order (IE Set HDD, HDD, CD or CD, HDD, HDD however you want, just no floppy in the three items)