Hello, first of all let me congratulate you for the precious material out there in the forum. Sure it's has made good things for the PEOPLE.
I'm new to overclock, and since i bought my new computer i wish to overclok it, and so i am attempting to reach a full stable 3.6 Ghz overclok and i'm counting on your help to do that. Below there my bios and system settings:
Advanced CPU Features:
CPU Clock Ratio ................................ [19x]
Intel(R) Turbo Boost Tech .................. [Disabled]
CPU Cores Enabled ............................ [All]
CPU Multi Threading .......................... [Enabled]
CPU Enhanced Halt (C1E) ................... [Disabled]
C3/C6/C7 State Support .................... [Disabled]
CPU Thermal Monitor ......................... [Enabled]
CPU EIST Function ............................ [Disabled]
Virtualization Technology ................... [Disabled] << Disabled if you do not use Vmware or Virtual PC Programs
Bi-Directional PROCHOT ..................... [Enabled]
Uncore & QPI Features:
QPI Link Speed .............................. x36
Uncore Frequency .......................... x18
Isonchronous Frequency ..................[Enabled]
Standard Clock Control:
Base Clock (BCLK) Control ................ [Enabled]
BCLK Frequency (MHz) .....................160
PCI Express Frequency (MHz) ........... [100]
C.I.A.2 [Disabled]
Advanced Clock Control:
CPU Clock Drive ..............................[800mV]
PCI Express Clock Drive ................... [900mV]
CPU Clock Skew ............................. [0ps]
IOH Clock Skew ............................. [0ps]
Advanced DRAM Features:
Performance Enhance ...................... [Turbo]
Extreme Memory Profile (X.M.P) ......... [Disabled]<<dont have this feature
System Memory Multiplier (SPD) ........ [8]
DRAM Timing Selectable (SPD) .......... [Manual]
Channel A + B + C
Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ......................9
tRCD .......................................9
tRP .........................................9
tRAS .......................................28
##Channel A Advanced Timing Control##
tRC ........................................<<<<dont have this feature
tRRD .......................................<<<<dont have this feature
tWTR ...................................... <<<<dont have this feature
tWR ........................................<<<<dont have this feature
tWTP .......................................<<<<dont have this feature
tWL ........................................<<<<dont have this feature
tRFC .......................................<<<<dont have this feature
tRTP .......................................<<<<dont have this feature
tFAW ...................................... <<<<dont have this feature
Command Rate (CMD) ................Auto
##Channel A Misc Timing Control##
Round Trip Latency ...................<<<<dont have this feature
B2B CAS Delay ..........................<<<<dont have this feature
Advanced Voltage Control:
CPU
Load Line Calibration ................. [Disabled]
CPU Vcore ...............................1.2
QPI/VTT Voltage 1.150v ............1.2
CPU PLL 1.800v .......................1.8
MCH/ICH
PCIE 1.500v ...........................1.5
QPI PLL 1.100v .......................1.1
IOH Core 1.100v .....................1.1
ICH I/O 1.500v .......................1.5
ICH Core 1.1v ........................1.1
DRAM
DRAM Voltage 1.500v ..............1.64
DRAM Termination 0.750v [AUTO]
Ch-A Data VRef. 0.750v [AUTO]
Ch-B Data VRef. 0.750v [AUTO]
Ch-C Data VRef. 0.750v [AUTO]
Ch-A Address VRef. 0.750v [AUTO]
Ch-B Address VRef. 0.750v [AUTO]
Ch-C Address VRef. 0.750v [AUTO]
Now im running at 3 Ghz but i'd like to achive 3.6. With my current settings i manage to run prime for 3 hours.
Do you sugest any changes? what should i do next?
Thanks in advance
I'm new to overclock, and since i bought my new computer i wish to overclok it, and so i am attempting to reach a full stable 3.6 Ghz overclok and i'm counting on your help to do that. Below there my bios and system settings:
Advanced CPU Features:
CPU Clock Ratio ................................ [19x]
Intel(R) Turbo Boost Tech .................. [Disabled]
CPU Cores Enabled ............................ [All]
CPU Multi Threading .......................... [Enabled]
CPU Enhanced Halt (C1E) ................... [Disabled]
C3/C6/C7 State Support .................... [Disabled]
CPU Thermal Monitor ......................... [Enabled]
CPU EIST Function ............................ [Disabled]
Virtualization Technology ................... [Disabled] << Disabled if you do not use Vmware or Virtual PC Programs
Bi-Directional PROCHOT ..................... [Enabled]
Uncore & QPI Features:
QPI Link Speed .............................. x36
Uncore Frequency .......................... x18
Isonchronous Frequency ..................[Enabled]
Standard Clock Control:
Base Clock (BCLK) Control ................ [Enabled]
BCLK Frequency (MHz) .....................160
PCI Express Frequency (MHz) ........... [100]
C.I.A.2 [Disabled]
Advanced Clock Control:
CPU Clock Drive ..............................[800mV]
PCI Express Clock Drive ................... [900mV]
CPU Clock Skew ............................. [0ps]
IOH Clock Skew ............................. [0ps]
Advanced DRAM Features:
Performance Enhance ...................... [Turbo]
Extreme Memory Profile (X.M.P) ......... [Disabled]<<dont have this feature
System Memory Multiplier (SPD) ........ [8]
DRAM Timing Selectable (SPD) .......... [Manual]
Channel A + B + C
Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ......................9
tRCD .......................................9
tRP .........................................9
tRAS .......................................28
##Channel A Advanced Timing Control##
tRC ........................................<<<<dont have this feature
tRRD .......................................<<<<dont have this feature
tWTR ...................................... <<<<dont have this feature
tWR ........................................<<<<dont have this feature
tWTP .......................................<<<<dont have this feature
tWL ........................................<<<<dont have this feature
tRFC .......................................<<<<dont have this feature
tRTP .......................................<<<<dont have this feature
tFAW ...................................... <<<<dont have this feature
Command Rate (CMD) ................Auto
##Channel A Misc Timing Control##
Round Trip Latency ...................<<<<dont have this feature
B2B CAS Delay ..........................<<<<dont have this feature
Advanced Voltage Control:
CPU
Load Line Calibration ................. [Disabled]
CPU Vcore ...............................1.2
QPI/VTT Voltage 1.150v ............1.2
CPU PLL 1.800v .......................1.8
MCH/ICH
PCIE 1.500v ...........................1.5
QPI PLL 1.100v .......................1.1
IOH Core 1.100v .....................1.1
ICH I/O 1.500v .......................1.5
ICH Core 1.1v ........................1.1
DRAM
DRAM Voltage 1.500v ..............1.64
DRAM Termination 0.750v [AUTO]
Ch-A Data VRef. 0.750v [AUTO]
Ch-B Data VRef. 0.750v [AUTO]
Ch-C Data VRef. 0.750v [AUTO]
Ch-A Address VRef. 0.750v [AUTO]
Ch-B Address VRef. 0.750v [AUTO]
Ch-C Address VRef. 0.750v [AUTO]
Now im running at 3 Ghz but i'd like to achive 3.6. With my current settings i manage to run prime for 3 hours.
Do you sugest any changes? what should i do next?
Thanks in advance
Comment