Tweet
Hey All !
So I have a new system, and so far it's working fantastic. I have a nice mild OC that's linx stable (10 passes) I just wanted to post my current settings and see if there was something I missed, some voltages I could tweak, etc... Thanks!
Gigabyte x58A-UD3r BIOS: F5
Intel i7 930 w/ Megahalem & 2 Akasa Apache
G.Skill 6gb DDR3-1600 (G.SKILL-Products)
Bios:
So I have a new system, and so far it's working fantastic. I have a nice mild OC that's linx stable (10 passes) I just wanted to post my current settings and see if there was something I missed, some voltages I could tweak, etc... Thanks!
Gigabyte x58A-UD3r BIOS: F5
Intel i7 930 w/ Megahalem & 2 Akasa Apache
G.Skill 6gb DDR3-1600 (G.SKILL-Products)
Bios:
Code:
[B]Advanced CPU Features:[/B] CPU Clock Ratio ................................ [21x] Intel(R) Turbo Boost Tech .................. [Enabled] CPU Cores Enabled ............................ [All] CPU Multi Threading .......................... [Enabled] CPU Enhanced Halt (C1E) ................... [Disabled] C3/C6/C7 State Support .................... [Enabled] CPU Thermal Monitor ......................... [Enabled] CPU EIST Function ............................ [Enabled] Virtualization Technology ................... [Disabled] Bi-Directional PROCHOT ..................... [Enabled] [B]Uncore & QPI Features:[/B] QPI Link Speed .............................. x36 Uncore Frequency .......................... 3200 [B]Standard Clock Control:[/B] Base Clock (BCLK) Control ................ [Enabled] BCLK Frequency (MHz) ..................... 160 PCI Express Frequency (MHz) ........... [100] C.I.A.2 [Disabled] [B]Advanced Clock Control:[/B] CPU Clock Drive ..............................[800mV] PCI Express Clock Drive ................... [900mV] CPU Clock Skew ............................. [0ps] IOH Clock Skew ............................. [0ps] [B]Advanced DRAM Features:[/B] Performance Enhance ...................... [Standard] Extreme Memory Profile (X.M.P) ......... [Disabled] System Memory Multiplier (SPD) ........ [10x] DRAM Timing Selectable (SPD) .......... [Manual] [B]Channel A + B + C Channel A Timing Settings:[/B] ##Channel A Standard Timing Control## CAS Latency Time ...................... 7 tRCD ....................................... 8 tRP ......................................... 7 tRAS ....................................... 24 CMD ..................................... 2 all auto ##Channel A Advanced Timing Control## tRC ........................................ (Should be = tRAS + tRP or above for stability) tRRD ....................................... tWTR ...................................... (Must be Write to Read Delay/Same Rank - (tWL + 4) tWR ........................................ tWTP ....................................... (tWTP Must = tWR + tWL + 4) tWL ........................................ (tWL Must be CAS Latency -1) tRFC ....................................... tRTP ....................................... tFAW ...................................... Command Rate (CMD) ................ ##Channel A Misc Timing Control## Round Trip Latency ................... B2B CAS Delay .......................... [B]Advanced Voltage Control: CPU[/B] Load Line Calibration ................. [Standard] CPU Vcore ............................... 1.26875 (stock) QPI/VTT Voltage 1.150v ............ 1.235 (1.175 stock) CPU PLL 1.800v ....................... Auto [B]MCH/ICH[/B] PCIE 1.500v ........................... Auto QPI PLL 1.100v ....................... Auto IOH Core 1.100v ..................... 1.10 ICH I/O 1.500v ....................... Auto ICH Core 1.1v ........................ Auto [B]DRAM[/B] DRAM Voltage 1.500v .............. 1.5v DRAM Termination 0.750v [AUTO] Ch-A Data VRef. 0.750v [AUTO] Ch-B Data VRef. 0.750v [AUTO] Ch-C Data VRef. 0.750v [AUTO] Ch-A Address VRef. 0.750v [AUTO] Ch-B Address VRef. 0.750v [AUTO] Ch-C Address VRef. 0.750v [AUTO]
Comment