X58A-UD3R & i7 920 temp issue

[tongerks]

Re: X58A-UD3R & i7 920 temp issue

here's the result of what youve ask me to do..



thats the final.. i dont know now what to do. or i should RMA this board...

[Lsdmeasap]

Re: X58A-UD3R & i7 920 temp issue

Well no stuck sensor.

You say your CPU is fine in another similar board right? Is that with your cooler and setup? If so your board might be faulty somehow, let me know if you need the RMA page

[tongerks]

Re: X58A-UD3R & i7 920 temp issue

yes i used the same setup with the same cooler in other board and the result is not the same.. can i use the RMA page even im here in the philippines? thanks

[Lsdmeasap]

Re: X58A-UD3R & i7 920 temp issue

Thanks!

No you would need to go another route for RMA there.

Send an email to the closest contact to your area listed here in the dropout menu
GIGABYTE

Or contact the place you purchased and ask, because you may have to RMA through them anyway

[tongerks]

Re: X58A-UD3R & i7 920 temp issue

what reason should i give because the shop that i bought this is not knowledgeable in this kind of issue they're depending on what the manufacturer recommendations.. so what reason should i give to them?

[wazza300]

Re: X58A-UD3R & i7 920 temp issue

i would put that the board is abnormally overheating,explain that youve tried the cpu in another mb under the same conditions and it runs much cooler,therfore the gigabyte mb is faulty as regards that its running far too hot and that you dont want to risk damaging further components,try attaching some coretemp pics to any emails aswell showing stock clocks and temps

[Lsdmeasap]

Re: X58A-UD3R & i7 920 temp issue

I agree, tell them you have two of the exact same boards and this one overheats things so much on the same hardware and settings you are worried it is faulty and is going to burn up your CPU or the board itself

[tongerks]

Re: X58A-UD3R & i7 920 temp issue

i got my motherboard now its temp using mega shadow in stock speed heres the pic.

[wazza300]

Re: X58A-UD3R & i7 920 temp issue

^^^ is that a new mb??? its still very high for stock clocks,whats your room temp?? try lowering your cpu voltage i can set mine to 1.18750v try that or one/two clicks higher



just thought id post you my current temps it was 24c today so temps are higher than normal,it depends how hot it is where you are as it will affect things

[tongerks]

Re: X58A-UD3R & i7 920 temp issue

wahh..why is still hot? temp here is 29c outside and open case..
heres my temp with intel hsf using prolimatech paste

[wazza300]

Re: X58A-UD3R & i7 920 temp issue

that looks right for the intel cooler,but it should be cooler with the mega shadow,but 29c room temp is higher than mine

[tongerks]

Re: X58A-UD3R & i7 920 temp issue

but when i try my proci on maximus 3 gene the temp is only 36c in intel stock and stock speed. huhu

[Lsdmeasap]

Re: X58A-UD3R & i7 920 temp issue

How much QPI and PLL are you setting?

[tongerks]

Re: X58A-UD3R & i7 920 temp issue

the default settings..its all the same i think this board again because they change my board before bec. its defective and now same problem..maybe its defective again.huhu another 1 month to wait...

[Lsdmeasap]

Re: X58A-UD3R & i7 920 temp issue

Well those increase if you raise the Bclk and leave them on Auto