good settings for max fsb speed on ex58-ud3r

[ferg_96]

i have ex58-ud3r rev 1.6 looking to get my fsb speed to 1600 any sugestions

[ferg_96]

Re: good settings for max fsb speed on ex58-ud3r

bump

[warren300]

Re: good settings for max fsb speed on ex58-ud3r

just set your bclk to 160x21 i think for 1600mhz ram speed,make sure to set ram speed to 1600mhz with ram multiplier,set ram voltage to spec and the timings, set cpu voltage to normal setting and qpi v to 1.3000

[JureZ]

Re: good settings for max fsb speed on ex58-ud3r

i have ex58-ud3r rev 1.6 looking to get my fsb speed to 1600 any sugestions

to get the ram running exactly at 1600 you need a BCLK of 200 MHz and a memory multiplier of 8. The other combination is 160*10, but then the processor may run at a maximum 160*21, which may not be the best for you.

as you may imagine, there are other requirements for these setting to work at all.

If you are just starting, the procedure is first to overclock the processor at slow ram speed, and then work on speeding up the ram. Do you want to read on the topic or is it all mostly clear to you at this time? for more info read the material in this thread: http://forums.tweaktown.com/f69/tota...x58-ud5-37980/

what are your currrent BIOS settings? System configuration?
Use the template lsdmeasp provides, for a reference of your BIOS settings.
Warren has also a nice set of working parameters listed on his sig.

good luck, Jure Z.

.

[Lsdmeasap]

Re: good settings for max fsb speed on ex58-ud3r

Yes, we need to know your full specs before we can advise.

It would be great if you also give us your current settings too! Template to do so is in my signature.