I'm running the f4c bios currently and I have a stable system right now. The issue is that I would like to be able to overclock as I'm running an H50 to my cpu it can go much faster. Only problem is, as soon as I take my computer anywhere out of spec it wont latch the memory and refuses to boot.
Any guesses?
ep45t-ds3r [f4c]
intel core 2 quad 9650
G.Skill F3-12800CL9-4GBNQ running at 1333 at 7-7-7-20
thanks,
rumblpak
[edit] Bios info
<div_prefs id="div_prefs"></div_prefs><div_prefs id="div_prefs"></div_prefs>
Any guesses?
ep45t-ds3r [f4c]
intel core 2 quad 9650
G.Skill F3-12800CL9-4GBNQ running at 1333 at 7-7-7-20
thanks,
rumblpak
[edit] Bios info
Code:
MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster ...............: Auto CPU Clock Ratio ..........................: 9 Fine CPU Clock Ratio.....................:.0 CPU Frequency ...........................: 9 x 333 Clock Chip Control Standard Clock Control CPU Host Clock Control..................: [Enabled] CPU Host Frequency (Mhz) ............: 333 Mhz PCI Express Frequency (Mhz) .........:100 C.I.A.2 .................................:[Disabled] Advanced Clock Control [Press Enter] CPU Clock Drive...........................: <<< 800 PCI Express Clock Drive.................: <<< 900 CPU Clock Skew (ps)....................: <<< 0 MCH Clock Skew (ps)...................: <<< 0 DRAM Performance Control Performance Enhance...................: [STANDARD] Extreme Memory Profile (X.M.P.).....: Disabled (G)MCH Frequency Latch...............: [Auto] <<< 333 System Memory Multiplier ..............: [3.20B] <<< 4.0B Memory Frequency (Mhz) ..............: 1333 DRAM Timing Selectable ................: [Manual] Standard Timing Control CAS Latency Time........................ [9] <<< 7 tRCD ......................................... [9] <<< 7 tRP'........................................... [9] <<< 7 tRAS.......................................... [25] <<< 20 Advanced Timing Control tRRD........................................... Auto tWTR.......................................... Auto tWR............................................ Auto tRFC........................................... Auto <<< 68 tRTP........................................... Auto Command Rate (CMD) ....................:2 Driving Strength Profiles Driving Strength ............................ Channel A Static tRead Value.........................:Default <<< 7 tRD Phase0 Adjustment...................:Auto tRD Phase1 Adjustment...................:Auto tRD Phase2 Adjustment .................:Auto tRD Phase3 Adjustment..................:Auto Trd2rd(Different Rank)....................:Auto Twr2wr(Different Rank)...................:Auto Twr2rd(Different Rank)...................:Auto Trd2wr(Same/Diff Rank)..................:Auto Dimm1 Clock Skew Control...............:Auto ps Dimm2 Clock Skew Control...............:Auto ps Channel B Static tRead Value.........................:Default <<< 7 tRD Phase0 Adjustment...................:Auto tRD Phase1 Adjustment...................:Auto tRD Phase2 Adjustment .................:Auto tRD Phase3 Adjustment..................:Auto Trd2rd(Different Rank)....................:Auto Twr2wr(Different Rank)...................:Auto Twr2rd(Different Rank)...................:Auto Trd2wr(Same/Diff Rank)..................:Auto Dimm1 Clock Skew Control...............:Auto ps Dimm2 Clock Skew Control...............:Auto ps Motherboard Voltage Control CPU CPU Vcore�.���.........................:Auto <<< 1.225V CPU Termination�..... 1.200V*.......: Auto <<< 1.2v CPU PLL�������....1.500V*.......: Auto <<< 1.5v CPU Referen.����....0.755V*.......: Auto <<< 0.76V MCH/ICH MCH Core�����.....1.100V...........: <<< 1.2V MCH Reference�.��.0.760V...........; <<< 0.76V MCH/DRAM Ref.�......0.750V...........: <<< 0.75V ICH I/O������.....1.500V............: <<< 1.5V DRAM DRAM Voltage ��....1.500V............: 1.5V (if i set this to anything else it wont boot) DRAM Termination .�0.750V............: <<< 0.75v Channel A Reference 0.750V............: <<< 0.75v Channel B Reference 0.750V............: <<< 0.75v Advanced Settings Limit CPUID Max. to 3.....................: [Disabled] No-Execute Memory Protect............: [Enabled] CPU Enhanced Halt (C1E)................: [Enabled] C2/C2E State Support....................: [Disabled] x C4/C4E State Support..................: [Disabled] CPU Thermal Monitor 2(TM2) ...........: [Enabled] CPU EIST Function.........................: [Enabled] Virtualization Technology................: [Disabled] Integrated Peripherals Legacy USB Storage Detect ..............[Enabled]
<div_prefs id="div_prefs"></div_prefs><div_prefs id="div_prefs"></div_prefs>
Comment