Announcement

Collapse
No announcement yet.

help raising my ram to 1600 when in the bios...

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    help raising my ram to 1600 when in the bios...

    hello everyone my name is rich and i am new at overclocking. i just oc my ex58 ud5 w/ i7 920 to 3.8ghz and its been running solid passing memtest, prime95, etc.. i was just wondering what the best method is in getting my ram to 1600mhz... my ram is good for 1800mhz.

    ram link OCZ DDR3 PC3-14400 Platinum Series Low-Voltage Triple Channel OCZ Technology

    Baseclock (bclck): 190
    DRam speed: 1520
    qpi link spd 36x
    sys memory multiplier 8.0
    Turbo Mode (on/off): On
    Hyper-threading (on/off): on



    CPU Voltage: 1.33125
    CPU PLL Voltage: 1.80
    QPI/DRam Voltage: 1.3500
    DRam Voltage: 1.65

    thank in advance for the help......
    Tags: None
  • #2
    Re: help raising my ram to 1600 when in the bios...

    try with the overclock i use,follow guide in sig,if you turn turbo on and set bclk to 180x21(with turbo) you should hit 1800mhz with your ram
    Last edited by warren300; 02-13-2010, 04:47 PM.
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) [email protected]
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

    Comment

    • #3
      Re: help raising my ram to 1600 when in the bios...

      whats up bro and thanks for your quick reply... i tried your setting to the #.... i couldn't get my computer to boot with 1.3000 volts in the ucore vtt, boot up freezing and blue screen. i tried to boot in many diff voltages in the ucore with no luck, the only way it booted was with the ucore on auto..... then i got this error message with orthos... i didnt want to go to much past the 1.35 volts on the ucore/vtt......


      error code with orthos

      Type: Blend - stress CPU and RAM Min: 8 Max: 4096 InPlace: No Mem: 3837 Time: 15
      CPU: 2661MHz FSB: 180MHz [183MHz x 14.5 est.]
      2/14/2010 1:57 AM
      Launching 2 threads...
      Using CPU #0
      Beginning a continuous self-test to check your computer.
      Press Stop to end this test.
      Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
      Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length.
      Test 3, 4000 Lucas-Lehmer iterations of M19374367 using 1024K FFT length.
      FATAL ERROR: Rounding was 0.5, expected less than 0.4
      Hardware failure detected, consult stress.txt file.
      Torture Test ran 4 minutes 31 seconds - 1 errors, 0 warnings.
      Execution halted.


      Using CPU #1
      Beginning a continuous self-test to check your computer.
      Press Stop to end this test.
      Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
      Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length.
      Test 3, 4000 Lucas-Lehmer iterations of M19374367 using 1024K FFT length.
      Torture Test ran 4 minutes 31 seconds - 0 errors, 0 warnings.
      Execution halted.

      Comment

      • #4
        Re: help raising my ram to 1600 when in the bios...

        do you have a d0 chip or a c0?? youll need more qpi v with a c0 also set your ram to 1.66 in bios not 1.64,did you set sytem performance enhance to standard aswell?...im 100% stable with those settings but every chip/motherboard/ram will be slightly different ..also what bios are you using?
        Last edited by warren300; 02-14-2010, 09:17 AM.
        Gigabyte ex58-ud5 f12 bios
        Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
        Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) [email protected]
        Thermolab Baram cpu cooler
        Dual Boot
        1xsamsung 750gb hard drive-win7 ultimate 64
        1xsamsung 750gb hard drive-windows xp pro 32
        Ati x1950 pro gpu
        Logitech X-530 5.1 Speakers
        1050w psu
        Nzxt lexa case
        http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

        Comment

        • #5
          Re: help raising my ram to 1600 when in the bios...

          my #'s

          i dont know if its a do or co! i got the oem and the only #'s i have are one the cpu and i am not taking the cooler plate off to find out...

          ram 1800
          cpu x 20
          qpi 36x 3600
          bclk 180
          ucore clock ratio x20
          sys multi 10.0
          v core 1.325 v
          qpi auto, you 1.3000 in your specs wont boot in my config...
          isnt 1.35v the max you can go in the qpi without harming your system.
          bios f9

          Comment

          • #6
            Re: help raising my ram to 1600 when in the bios...

            Originally posted by richie76 View Post
            my #'s

            i dont know if its a do or co! i got the oem and the only #'s i have are one the cpu and i am not taking the cooler plate off to find out...

            ram 1800
            cpu x 20
            qpi 36x 3600
            bclk 180
            ucore clock ratio x20
            sys multi 10.0
            v core 1.325 v
            qpi auto, you 1.3000 in your specs wont boot in my config...
            isnt 1.35v the max you can go in the qpi without harming your system.
            bios f9
            no look in easytune it will tell you

            Gigabyte ex58-ud5 f12 bios
            Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
            Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) [email protected]
            Thermolab Baram cpu cooler
            Dual Boot
            1xsamsung 750gb hard drive-win7 ultimate 64
            1xsamsung 750gb hard drive-windows xp pro 32
            Ati x1950 pro gpu
            Logitech X-530 5.1 Speakers
            1050w psu
            Nzxt lexa case
            http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

            Comment

            • #7
              Re: help raising my ram to 1600 when in the bios...

              Originally posted by richie76 View Post
              my #'s

              i dont know if its a do or co! i got the oem and the only #'s i have are one the cpu and i am not taking the cooler plate off to find out...

              ram 1800
              cpu x 20
              qpi 36x 3600
              bclk 180
              ucore clock ratio x20
              sys multi 10.0
              v core 1.325 v
              qpi auto, you 1.3000 in your specs wont boot in my config...
              isnt 1.35v the max you can go in the qpi without harming your system.
              bios f9
              ^^^^ is v core your cpu voltage? if so set it to the normal setting in the voltage list
              Gigabyte ex58-ud5 f12 bios
              Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
              Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) [email protected]
              Thermolab Baram cpu cooler
              Dual Boot
              1xsamsung 750gb hard drive-win7 ultimate 64
              1xsamsung 750gb hard drive-windows xp pro 32
              Ati x1950 pro gpu
              Logitech X-530 5.1 Speakers
              1050w psu
              Nzxt lexa case
              http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

              Comment

              • #8
                Re: help raising my ram to 1600 when in the bios...

                any luck with this?????
                Gigabyte ex58-ud5 f12 bios
                Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
                Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) [email protected]
                Thermolab Baram cpu cooler
                Dual Boot
                1xsamsung 750gb hard drive-win7 ultimate 64
                1xsamsung 750gb hard drive-windows xp pro 32
                Ati x1950 pro gpu
                Logitech X-530 5.1 Speakers
                1050w psu
                Nzxt lexa case
                http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

                Comment

                • #9
                  Re: help raising my ram to 1600 when in the bios...

                  didn't try it yet bro, i was at a wedding last night and now am at work for the next 24hrs i will try it as soon as i get home...... thanks for all the help. thanks a bunch for letting me know where it tells me it a do or co, feel kind of stupid being that i use that program and i didn't see it lol

                  Comment

                  Previous template Next
                  Working...
                  X