Even though i have Load Line Calibration enabled when i overclock my vcore instead of going highter on full load it drops and makes the system unstable. All my friends that have this board they dont have this problem.
Me and my best friend bought the exact same systems and i overclocked his without a problem.
When in full load his vcore goes up and keeps his system stable. Mine has the opposite effect.
After 40 seconds on full load the vcore goes from 1.360v to 1.240v and system reboots. I have all the energy options disabled.
C-states disabled,Turbo disabled, HEIST disabled, LLC Enabled. Do you think theres a bios update that you can send me to fix that or should i RMA the board?
Or if its something else please tell me cause i'm going crazy.
Intel i5-750 // Gigabyte-GA-P55A-UD3 // OCZ 2x2GB DDR3 1600MHz // ATI 5850 1GB // HD Samsung // Spinpoint F3 1GB // PSU Corsair HX650w // Case CM-690 // Cooling Corsair Hydro H50
Me and my best friend bought the exact same systems and i overclocked his without a problem.
When in full load his vcore goes up and keeps his system stable. Mine has the opposite effect.
After 40 seconds on full load the vcore goes from 1.360v to 1.240v and system reboots. I have all the energy options disabled.
C-states disabled,Turbo disabled, HEIST disabled, LLC Enabled. Do you think theres a bios update that you can send me to fix that or should i RMA the board?
Or if its something else please tell me cause i'm going crazy.
Intel i5-750 // Gigabyte-GA-P55A-UD3 // OCZ 2x2GB DDR3 1600MHz // ATI 5850 1GB // HD Samsung // Spinpoint F3 1GB // PSU Corsair HX650w // Case CM-690 // Cooling Corsair Hydro H50
Comment