Hey there, this is my first post here and im hoping you guys can give me a hand. I got this board (ga x58a ud5) a few days ago. It wouldnt post out of the box due to some memory compatibility issues, luckily the F2d Bios fixed that problem. Now that i can post with all six gigs or ram (3x2 gb XMS3 1600 9-9-9-24) i am having some issues overclocking. Even when i try a slight oc like 3.36GHz i often get lock ups in prime95 and or posting problems, sometimes it will post othertimes i get a C1 error with fast beeping cycles (this is the same thing that happened every time before the bios update). Hope you guys can help!
My bios settings: note these are my new settings and i havent tested them yet!
My bios settings: note these are my new settings and i havent tested them yet!
Code:
Advanced CPU Features: CPU Clock Ratio ................................ [20x] Intel(R) Turbo Boost Tech .................. [Disabled] CPU Cores Enabled ............................ [All] CPU Multi Threading .......................... [Enabled] CPU Enhanced Halt (C1E) ................... [Disabled] C3/C6/C7 State Support .................... [Disabled] CPU Thermal Monitor ......................... [Enabled] CPU EIST Function ............................ [Disabled] Virtualization Technology ................... [Enabled] Bi-Directional PROCHOT ..................... [Enabled] Uncore & QPI Features: QPI Clock Ratio................................[x36] QPI Link Speed .............................. [AUTO] Uncore Frequency .......................... [x16] Isonchronous Frequency ..................[Enabled] Standard Clock Control: Base Clock (BCLK) Control ................ [Enabled] BCLK Frequency (MHz) .....................[170] PCI Express Frequency (MHz) ........... [AUTO] Advanced Clock Control: CPU Clock Drive ..............................[800mV] PCI Express Clock Drive ................... [900mV] CPU Clock Skew ............................. [0ps] IOH Clock Skew ............................. [0ps] Advanced DRAM Features: Performance Enhance ...................... [Standard] Extreme Memory Profile (X.M.P) ......... [Disabled] System Memory Multiplier (SPD) ........ [x8] DRAM Timing Selectable (SPD) .......... [Quick] Channel A + B + C Channel A Timing Settings: ##Channel A Standard Timing Control## CAS Latency Time ..........8.......[9]......... tRCD ............................8.......[9]............. . tRP ..............................8.......[9]........... .... tRAS ...........................20......[24]............. .. Command Rate................1........[2]......... Advanced Voltage Control: CPU Load Line Calibration ................. [Enabled] CPU Vcore 1.26875v...................[1.15v] QPI/VTT Voltage 1.175v ............[1.35v] CPU PLL 1.800v .......................[AUTO] MCH/ICH PCIE 1.500v ...........................[same] QPI PLL 1.100v .......................[same] IOH Core 1.100v .....................[same] ICH I/O 1.500v .......................[same] ICH Core 1.1v ........................[same] DRAM DRAM Voltage 1.500v ..............[1.64v] DRAM Termination 0.750v [AUTO] Ch-A Data VRef. 0.750v [AUTO] Ch-B Data VRef. 0.750v [AUTO] Ch-C Data VRef. 0.750v [AUTO] Ch-A Address VRef. 0.750v [AUTO] Ch-B Address VRef. 0.750v [AUTO] Ch-C Address VRef. 0.750v [AUTO]
Comment