Announcement

Collapse
No announcement yet.

Overclock suggestions?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Overclock suggestions?

    I've never OC before and would like a few suggestions what to do.
    Here is my first try at it. I'm stable at 3.02 GHz...
    I have:

    GIGABYTE GA-EP45-UD3P V1.0/1.1 BIOS F9
    Q9400 w/ OCZ Reaper HPC 8GB (4x2GB) DDR2 1066 (PC2 8500)
    Vista Ultimate 64-bit

    BIOS
    Code:
    MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster .................[Auto]
CPU Clock Ratio .........................[ 8 X]
Fine CPU Clock Ratio..................... +0.0
CPU Frequency .......................3.02GHz( 400x8)


Clock Chip Control 
Standard Clock Control
CPU Host Clock Control...................[Enabled]
CPU Host Frequency (Mhz) ................[400]
PCI Express Frequency (Mhz) .............[100]
C.I.A.2 .................................[Disabled]

Advanced Clock Control [Press Enter]
CPU Clock Drive........................<<< 800mV
PCI Express Clock Drive................<<< 800mV
CPU Clock Skew (ps)....................<<< 0ps
MCH Clock Skew (ps)....................<<< 0ps


DRAM Performance Control
Performance Enhance......................[Standard]
Extreme Memory Profile (X.M.P.)..........[Disabled]
(G)MCH Frequency Latch...................[400MHz]
System Memory Multiplier ................[2.66D]
Memory Frequency (Mhz) ...................1066
DRAM Timing Selectable ..................[Manual]

Standard Timing Control
CAS Latency Time..........................   5
tRCD .....................................   5
tRP'......................................   5
tRAS......................................  15

Advanced Timing Control
tRRD.................................4...[Auto]
tWTR.................................4...[Auto]
tWR..................................8...[Auto]
tRFC................................72...[Auto]
tRTP.................................4...[Auto]
Command Rate (CMD) ..................0...[Auto]

Channel A Timing Settings
Static tRead Value..................10...[Auto]
 tRD Phase0 Adjustment...............0...[Auto]
 tRD Phase1 Adjustment...............0...[Auto]
 tRD Phase2 Adjustment ..............0...[Auto]
 tRD Phase3 Adjustment...............0...[Auto]

Trd2rd(Different Rank)...............8...[Auto]
Twr2wr(Different Rank)...............8...[Auto]
Twr2rd(Different Rank)...............7...[Auto]
Trd2wr(Same/Diff Rank)...............9...[Auto]

Dimm1 Clock Skew Control.................[Auto]
Dimm2 Clock Skew Control.................[Auto]
DDR Write Traing.........................[Auto]

Channel A Driving Settings
Driving Strength Profile.................[Auto]

Data Driving Pull-Up Level...............[Auto]
Cmd Driving Pull-Up Level................[Auto]
Ctrl Driving Pull-Up Level...............[Auto]
Clk Driving Pull-Up Level................[Auto]

Data Driving Pull-Down Level.............[Auto]
Cmd Driving Pull-Down Level..............[Auto]
Ctrl Driving Pull-Down Level.............[Auto]
Clk Driving Pull-Down Level..............[Auto]

Channel B Timing Settings
Static tRead Value..................10...[Auto]
 tRD Phase0 Adjustment...............0...[Auto]
 tRD Phase1 Adjustment...............0...[Auto]
 tRD Phase2 Adjustment ..............0...[Auto]
 tRD Phase3 Adjustment...............0...[Auto]

Trd2rd(Different Rank)...............8...[Auto]
Twr2wr(Different Rank)...............8...[Auto]
Twr2rd(Different Rank)...............7...[Auto]
Trd2wr(Same/Diff Rank)...............9...[Auto]

Dimm1 Clock Skew Control.................[Auto]
Dimm2 Clock Skew Control.................[Auto]
DDR Write Traing.........................[Auto]

Channel B Driving Settings
Driving Strength Profile.................[Auto]

Data Driving Pull-Up Level...............[Auto]
Cmd Driving Pull-Up Level................[Auto]
Ctrl Driving Pull-Up Level...............[Auto]
Clk Driving Pull-Up Level................[Auto]

Data Driving Pull-Down Level.............[Auto]
Cmd Driving Pull-Down Level..............[Auto]
Ctrl Driving Pull-Down Level.............[Auto]
Clk Driving Pull-Down Level..............[Auto]

Motherboard Voltage Control
>>> CPU
Load-Line Calibration....................[Disabled]
CPU Vcore.......................1.21250V.[1.22500V]
CPU Termination.................1.200V...[Auto]
CPU PLL.........................1.500V...[Auto]
CPU Reference...................0.760V...[Auto]

>>> MCH/ICH
MCH Core........................1.100V...[1.18V]
MCH Reference...................0.760V...[Auto]
MCH/DRAM Ref....................0.900V...[Auto]
ICH I/O.........................1.500V...[Auto]
ICH Core........................1.100V...[Auto]

>>> DRAM
DRAM Voltage....................1.800V...[Auto]
DRAM Term.......................0.900V...[Auto]
Channel A Referance.............0.900V...[Auto]
Channel B Referance.............0.900V...[Auto]

Advanced Settings
HDD S.M.A.R.T. Capability................[Enabled]
Limit CPUID Max. to 3....................[Disabled]
No-Execute Memory Protect................[Enabled]
CPU Enhanced Halt (C1E)..................[Disabled]
C2/C2E State Support.....................[Enabled]
x C4/C4E State Support...................[Disabled]
CPU Thermal Monitor 2(TM2) ..............[Enabled]
CPU EIST Function........................[Disabled]
Virtualization Technology................[Disabled]
Init Display First.......................[PEG]

Integrated Peripherals
SATA Port0-3 Native Mode.................[Enabled]
Azalia Codec.............................[Auto]
Onboard Serial Port 1....................[Disabled]
Onboard Parallel Port....................[Disabled]
Parallel Port Mode....................... SPP
Legacy USB Storage Detect ...............[Enabled]

Power Management Setup
ACPI Suspend Type........................[S1(POS)]
Soft-Off by PWR-BTTN.....................[Delay 4 Sec.]
PME Event Wake Up........................[Disabled]
Power On by Ring.........................[Disabled]
Resume by Alarm..........................[Disabled]
HPET Support.............................[Enabled]
HPET Mode................................[64-bit mode]
Power On By Mouse........................[Disable]
Power On By Keyboard.....................[Disable]
KB Power ON Password.....................Enter
AC Back Function.........................[Soft-Off]

PnP/PCI Configurations
PCI1 IRQ Assignment......................[Auto]
PCI2 IRQ Assignment......................[Auto]
    Lian-Li PC-A77B Case
    OCZ Z Series Gold 1000W PS
    GIGABYTE GA-EP45-UD3P V1.0/1.1
    Q9400
    OCZ Reaper HPC 8GB (4x2GB)DDR2 1066 (PC2 8500)
    Vista Ultimate 64-bit
    (2) Samsug 1.5Tb HD in RAID 1 (OS)
    9650SE-16ML RAID Card with BBU running
    (16) Western Digital Caviar Black WD7501AALS 750GB 7200 in RAID 6
    (3) AMS DS-3151SSBK Backplanes
    EVGA GTX 280 Video Card
    (1) 28" (1900 X 1200)
    (1) 21" (1680 X 1050)
    Last edited by mr.radon; 01-10-2010, 06:45 PM.
    Tags: None
  • #2
    Re: Overclock suggestions?

    Was hoping to get some advice on these settings, she seems stable, more testing on memory though.

    New settings:
    GIGABYTE GA-EP45-UD3P V1.0/1.1
    Q9400
    OCZ Reaper HPC 8GB (4x2GB)DDR2 1066 (PC2 8500)
    Vista Ultimate 64-bit
    Code:
    MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster .................[Auto]
CPU Clock Ratio .........................[ 8 X]
Fine CPU Clock Ratio..................... +0.0
CPU Frequency .......................3.40GHz( 425x8)


Clock Chip Control 
Standard Clock Control
CPU Host Clock Control...................[Enabled]
CPU Host Frequency (Mhz) ................[425]
PCI Express Frequency (Mhz) .............[100]
C.I.A.2 .................................[Disabled]

Advanced Clock Control [Press Enter]
CPU Clock Drive........................<<< 800mV
PCI Express Clock Drive................<<< 900mV
CPU Clock Skew (ps)....................<<< 150ps
MCH Clock Skew (ps)....................<<< 250ps


DRAM Performance Control
Performance Enhance......................[Standard]
Extreme Memory Profile (X.M.P.)..........[Disabled]
(G)MCH Frequency Latch...................[333]
System Memory Multiplier ................[2.640B]
Memory Frequency (Mhz) ...................1020
DRAM Timing Selectable ..................[Manual]
Standard Timing Control
CAS Latency Time..........................   5
tRCD .....................................   5
tRP'......................................   5
tRAS......................................  15

Advanced Timing Control
tRRD.................................4...[3]
tWTR.................................4...[3]
tWR..................................8...[6]
tRFC................................72...[54]
tRTP.................................4...[3]
Command Rate (CMD) ..................0...[2]

Channel A Timing Settings
Static tRead Value..................10...[Auto]
 tRD Phase0 Adjustment...............0...[Auto]
 tRD Phase1 Adjustment...............0...[Auto]
 tRD Phase2 Adjustment ..............0...[Auto]
 tRD Phase3 Adjustment...............0...[Auto]

Trd2rd(Different Rank)...............8...[Auto]
Twr2wr(Different Rank)...............8...[Auto]
Twr2rd(Different Rank)...............7...[Auto]
Trd2wr(Same/Diff Rank)...............9...[Auto]

Dimm1 Clock Skew Control.................[Auto]
Dimm2 Clock Skew Control.................[Auto]
DDR Write Traing.........................[Auto]

Channel A Driving Settings
Driving Strength Profile.................[Auto]

Data Driving Pull-Up Level...............[Auto]
Cmd Driving Pull-Up Level................[Auto]
Ctrl Driving Pull-Up Level...............[Auto]
Clk Driving Pull-Up Level................[Auto]

Data Driving Pull-Down Level.............[Auto]
Cmd Driving Pull-Down Level..............[Auto]
Ctrl Driving Pull-Down Level.............[Auto]
Clk Driving Pull-Down Level..............[Auto]

Channel B Timing Settings
Static tRead Value..................10...[Auto]
 tRD Phase0 Adjustment...............0...[Auto]
 tRD Phase1 Adjustment...............0...[Auto]
 tRD Phase2 Adjustment ..............0...[Auto]
 tRD Phase3 Adjustment...............0...[Auto]

Trd2rd(Different Rank)...............8...[Auto]
Twr2wr(Different Rank)...............8...[Auto]
Twr2rd(Different Rank)...............7...[Auto]
Trd2wr(Same/Diff Rank)...............9...[Auto]

Dimm1 Clock Skew Control.................[Auto]
Dimm2 Clock Skew Control.................[Auto]
DDR Write Traing.........................[Auto]

Channel B Driving Settings
Driving Strength Profile.................[Auto]

Data Driving Pull-Up Level...............[Auto]
Cmd Driving Pull-Up Level................[Auto]
Ctrl Driving Pull-Up Level...............[Auto]
Clk Driving Pull-Up Level................[Auto]

Data Driving Pull-Down Level.............[Auto]
Cmd Driving Pull-Down Level..............[Auto]
Ctrl Driving Pull-Down Level.............[Auto]
Clk Driving Pull-Down Level..............[Auto]

Motherboard Voltage Control
>>> CPU
Load-Line Calibration....................[Disabled]
CPU Vcore.......................1.21250V.[1.30000V]
CPU Termination.................1.200V...[1.240]
CPU PLL.........................1.500V...[1.570]
CPU Reference...................0.760V...[0.755]

>>> MCH/ICH
MCH Core........................1.100V...[1.20V]
MCH Reference...................0.760V...[0.825V]
MCH/DRAM Ref....................0.900V...[0.910V]
ICH I/O.........................1.500V...[1.570V]
ICH Core........................1.100V...[1.100V]

>>> DRAM
DRAM Voltage....................1.800V...[1.96V]
DRAM Term.......................0.900V...[Auto]
Channel A Referance.............0.900V...[Auto]
Channel B Referance.............0.900V...[Auto]

Advanced Settings
HDD S.M.A.R.T. Capability................[Enabled]
Limit CPUID Max. to 3....................[Disabled]
No-Execute Memory Protect................[Enabled]
CPU Enhanced Halt (C1E)..................[Disabled]
C2/C2E State Support.....................[Enabled]
x C4/C4E State Support...................[Disabled]
CPU Thermal Monitor 2(TM2) ..............[Enabled]
CPU EIST Function........................[Disabled]
Virtualization Technology................[Disabled]
Init Display First.......................[PEG]

Integrated Peripherals
SATA Port0-3 Native Mode.................[Enabled]
Azalia Codec.............................[Auto]
Onboard Serial Port 1....................[Disabled]
Onboard Parallel Port....................[Disabled]
Parallel Port Mode....................... SPP
Legacy USB Storage Detect ...............[Enabled]

Power Management Setup
ACPI Suspend Type........................[S1(POS)]
Soft-Off by PWR-BTTN.....................[Delay 4 Sec.]
PME Event Wake Up........................[Disabled]
Power On by Ring.........................[Disabled]
Resume by Alarm..........................[Disabled]
HPET Support.............................[Enabled]
HPET Mode................................[64-bit mode]
Power On By Mouse........................[Disable]
Power On By Keyboard.....................[Disable]
KB Power ON Password.....................Enter
AC Back Function.........................[Soft-Off]

PnP/PCI Configurations
PCI1 IRQ Assignment......................[Auto]
PCI2 IRQ Assignment......................[Auto]
    Lian-Li PC-A77B Case
    OCZ Z Series Gold 1000W PS
    GIGABYTE GA-EP45-UD3P V1.0/1.1
    Q9400
    OCZ Reaper HPC 8GB (4x2GB)DDR2 1066 (PC2 8500)
    Vista Ultimate 64-bit
    (2) Samsug 1.5Tb HD in RAID 1 (OS)
    9650SE-16ML RAID Card with BBU running
    (16) Western Digital Caviar Black WD7501AALS 750GB 7200 in RAID 6
    (3) AMS DS-3151SSBK Backplanes
    EVGA GTX 280 Video Card
    (1) 28" (1900 X 1200)
    (1) 21" (1680 X 1050)

    Comment

    Previous template Next
    Working...
    X