GA-EX58-UD5 overclocking, any stickies

[2002z06]

Have the system set to optimized, anyone have some bios specs to increase performance, mild, hot and extra crispy. Thanks Jim.

[2002z06]

Re: GA-EX58-UD5 overclocking, any stickies

What is best bios? I have just reflashed to F9M, what is a good stable speed with low temps?

[wazza300]

Re: GA-EX58-UD5 overclocking, any stickies

heres a quick setup for 3.8ghz its the settings i use,just set your ram rimings according to your ram


Advanced CPU Features:
CPU Clock Ratio ................................ [x20] (x21 effective as Turbo is on)
Intel(R) Turbo Boost Tech .................. [ENABLED]
CPU Cores Enabled ............................ [All]
CPU Multi Threading .......................... [Enabled]
CPU Enhanced Halt (C1E) ................... [ENABLED]
C3/C6/C7 State Support .................... [ENABLED]
CPU Thermal Monitor ......................... [Enabled]
CPU EIST Function ............................ [ENABLED]

Bi-Directional PROCHOT ..................... [Enabled]

Uncore & QPI Features:
QPI Link Speed .............................. x36 (QPI frequency 6.48 GHz)
Uncore Frequency .......................... 3600 MHz (Uncore Multiplier x 20) always 2xram multi+1 Isonchronous Frequency [ENAbled]

Standard Clock Control:
Base Clock (BCLK) Control ................ [Enabled]
BCLK Frequency (MHz) ..................... 180
PCI Express Frequency (MHz) ........... Auto [100]
C.I.A.2 [Disabled]

Advanced Clock Control:
CPU Clock Drive ..............................Auto [800mV]
PCI Express Clock Drive ................... Auto [900mV]
CPU Clock Skew ............................. Auto [0ps]
IOH Clock Skew ............................. Auto[0ps]

Advanced DRAM Features:
Performance Enhance ...................... [STANDARD]
Extreme Memory Profile (X.M.P) ......... [Disabled]
System Memory Multiplier (SPD) ........ x10 (SET TO GIVE YOU YOUR RAMS RATED SPEED OR AS CLOSE TO)
DRAM Timing Selectable (SPD) .......... [QUICK]

Each Channel A + B + C set:

CAS Latency Time .......7<<<<set to your ram spec
tRCD ...................8<<<<set to your ram spec
tRP ....................7<<<<set to your ram spec
tRAS ...................20<<< set to your ram spec
Command Rate = Auto

CPU Vcore ............................."normal" setting
PCIE 1.500v ........................... Auto
QPI/Vtt .................................. Manual 1.30000
QPI PLL 1.100v .......................Auto
IOH Core 1.100v ..................... AUTO
ICH I/O 1.500v ....................... Auto
ICH Core 1.1v ........................ Auto

DRAM
DRAM Voltage 1.500v ..............1.64 DRAM

Termination 0.750v [AUTO]
Ch-A Data VRef. 0.750v [AUTO]
Ch-B Data VRef. 0.750v [AUTO]
Ch-C Data VRef. 0.750v [AUTO]
Ch-A Address VRef. 0.750v [AUTO]
Ch-B Address VRef. 0.750v [AUTO]
Ch-C Address VRef. 0.750v [AUTO]

[2002z06]

Re: GA-EX58-UD5 overclocking, any stickies

Would you recommend latest stock bios or modded beta bios?

[wazza300]

Re: GA-EX58-UD5 overclocking, any stickies

try latest beta bios it will have all the latest updates in it,there 100% safe to use