I just bought the brand new Gigabyte MA785GMT-UD2H, CPU AMD X4 965 and Power Supply 600watt from yesterday. I put all the part all together and plus everythings right, when i turn it on the monitor show me OFF MODE IN 5 SECOND. I cant even get into BIOS or anything. Is anyone here can help me with this problem
Announcement
Collapse
No announcement yet.
MA785GMT-UD2H Issue
Collapse
X
-
Re: MA785GMT-UD2H Issue
When you have a no P.O.S.T. Just before sending the motherboard back you will want to remove the motherboard from the case and perform a P.O.S.T. bench test to it.
Instructions as follows.
Please follow the following simple steps.
1. Remove the motherboard from the case and any trays or chassies.
2. Place the motherboard on top of the cardboard box (you can use the motherboard box)
3. Install the CPU, CPU fan, Memory, Power supply plugs (plug the 1 X 20 pin and 1 X 4 or 2 X 8 pin from the power supply unit) and a good working video card.
4. Hook the monitor to the video card and be sure the monitor is switched on.
5. Turn on the system board by using the case "Power on" switch.
6. If the system fails to POST, check the components' insertion again to ensure they are all connected properly.
Then RMA. This may save you some time and S&H charges if it is a short from the case.Last edited by artdrivers; 12-21-2009, 02:05 PM.http://forums.tweaktown.com/gigabyte...ench-test.html
http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
Gigabyte GA-MA78GM-S2H rev.1.1 F11
Sapphire 3870HD / 100225L / 512MB / ddr4
4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
(2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
(1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
(2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
Antec /Neo HE550 / 550W
Mid size ATX case with show through panel
2) 80x80 front fans (1) 120x120 rear fan and small nb fan
Microsoft comfort curve USB keyboard 2000 ver.1.0
Logitech G500 USB mouse
Monitor: CMV937A
7.1+2 Channel High Definition ALC889A
Dual boot Windows 7 32bit home & Windows 7 64bit home
Comment
-
Re: MA785GMT-UD2H Issue
Originally posted by artdrivers View PostWhen you have a no P.O.S.T. Just before sending the motherboard back you will want to remove the motherboard from the case and perform a P.O.S.T. bench test to it.
Instructions as follows.
Please follow the following simple steps.
1. Remove the motherboard from the case and any trays or chassies.
2. Place the motherboard on top of the cardboard box (you can use the motherboard box)
3. Install the CPU, CPU fan, Memory, Power supply plugs (plug the 1 X 20 pin and 1 X 4 or 2 X 8 pin from the power supply unit) and a good working video card.
4. Hook the monitor to the video card and be sure the monitor is switched on.
5. Turn on the system board by using the case "Power on" switch.
6. If the system fails to POST, check the components' insertion again to ensure they are all connected properly.
Then RMA. This may save you some time and S&H charges if it is a short from the case.
Comment
-
Re: MA785GMT-UD2H Issue
Everything can't be right. You have a bad connection or part somewhere. You may want to try swapping out parts untill you find it, or take it to a repair shop if you don't have spare parts to exchange.Last edited by artdrivers; 12-21-2009, 02:30 PM.http://forums.tweaktown.com/gigabyte...ench-test.html
http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
Gigabyte GA-MA78GM-S2H rev.1.1 F11
Sapphire 3870HD / 100225L / 512MB / ddr4
4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
(2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
(1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
(2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
Antec /Neo HE550 / 550W
Mid size ATX case with show through panel
2) 80x80 front fans (1) 120x120 rear fan and small nb fan
Microsoft comfort curve USB keyboard 2000 ver.1.0
Logitech G500 USB mouse
Monitor: CMV937A
7.1+2 Channel High Definition ALC889A
Dual boot Windows 7 32bit home & Windows 7 64bit home
Comment
-
Re: MA785GMT-UD2H Issue
Originally posted by artdrivers View PostEverything can't be right. You have a bad connection or part somewhere. You may want to try swapping out parts untill you find it, or take it to a repair shop if you don't have spare parts to exchange.
Comment
-
Re: MA785GMT-UD2H Issue
Check the switches on the power supply.http://forums.tweaktown.com/gigabyte...ench-test.html
http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
Gigabyte GA-MA78GM-S2H rev.1.1 F11
Sapphire 3870HD / 100225L / 512MB / ddr4
4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
(2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
(1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
(2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
Antec /Neo HE550 / 550W
Mid size ATX case with show through panel
2) 80x80 front fans (1) 120x120 rear fan and small nb fan
Microsoft comfort curve USB keyboard 2000 ver.1.0
Logitech G500 USB mouse
Monitor: CMV937A
7.1+2 Channel High Definition ALC889A
Dual boot Windows 7 32bit home & Windows 7 64bit home
Comment
Comment