hi!
so here's the problem... for the past year i ignored this problem since i had no time to try to fix it, so yesterday i decided to give it a shot... previously i had the "infinite reebot" when trying to start the pc with all modules (while it worked perfectly with 2). but yesterday it decided to boot without problems.. so i became interested and decided to test with memtest86 (v3.2). first i tested 2 modules, then the other 2, they all passed with no errors, then i decided to put all 4, and it showed me 90k+ errors (or was it 9k, not sure :P ) despite it boots with no problem. then i decided to reinstall windows, but got stuck at "setup is starting..." (with 4 modules, windows 7 32bit), BUT installed flawlessly with 2 modules.
the rig:
Gigabyte p35-ds3p
Intel Q6600 at 2.4 w/ Thermaltake BigTyphoon 120
OCZ Gold XTC PC6400 4x1Gb
Powercolor Radeon 3870 PCS
Western Digital Caviar Blue 500Gb
Seagate ST410AS 250Gb (Windows 7, 32bit)
nothing is overclocked, everything is pretty much at its default options (except work w/ USB mouse, kboard xD)
so... is it the settings problem? is it the motherboard? i doubt it's the RAM itself, considering they work 2 at a time, and showing no errors.
thx in advance!
p.s. forgive me if there's an explanation to this problem, I searched and found nothing similar enough to this problem.
so here's the problem... for the past year i ignored this problem since i had no time to try to fix it, so yesterday i decided to give it a shot... previously i had the "infinite reebot" when trying to start the pc with all modules (while it worked perfectly with 2). but yesterday it decided to boot without problems.. so i became interested and decided to test with memtest86 (v3.2). first i tested 2 modules, then the other 2, they all passed with no errors, then i decided to put all 4, and it showed me 90k+ errors (or was it 9k, not sure :P ) despite it boots with no problem. then i decided to reinstall windows, but got stuck at "setup is starting..." (with 4 modules, windows 7 32bit), BUT installed flawlessly with 2 modules.
the rig:
Gigabyte p35-ds3p
Intel Q6600 at 2.4 w/ Thermaltake BigTyphoon 120
OCZ Gold XTC PC6400 4x1Gb
Powercolor Radeon 3870 PCS
Western Digital Caviar Blue 500Gb
Seagate ST410AS 250Gb (Windows 7, 32bit)
nothing is overclocked, everything is pretty much at its default options (except work w/ USB mouse, kboard xD)
so... is it the settings problem? is it the motherboard? i doubt it's the RAM itself, considering they work 2 at a time, and showing no errors.
thx in advance!
p.s. forgive me if there's an explanation to this problem, I searched and found nothing similar enough to this problem.
Comment