Gigabyte GTX 295

[Judge-dredd]

hi guys i have a intel I7 965 with a Gigabyte EX58 Extreme 6 gigs of ram at 1600 I just upgraded to 2 Gigabyte GTX 295
i was wondering if ant one has a good overclocking config they would post

system running at 3.7 now only thing i changed was mulipler to 27 for that

im trying to get a better 3dmark score right now score is P34814 3DMarks

I no its a vary good score but i think i can get it alot better with right settings

here link ORB - Compare

[Lsdmeasap]

Re: Gigabyte GTX 295

Give me your settings and I can advise back, do you want 4-4.2Ghz? You may score better with a higher Bclk and Uncore then a lower Bclk/uncore

[Judge-dredd]

Re: Gigabyte GTX 295

settings below thank for any sugestion

Advanced CPU Features:
CPU Clock Ratio ................................ [27x]
Intel(R) Turbo Boost Tech .................. [Enabled]
CPU Cores Enabled ............................ [All]
CPU Multi Threading .......................... [Enabled]
CPU Enhanced Halt (C1E) ................... [Disabled]
C3/C6/C7 State Support .................... [Disabled]
CPU Thermal Monitor ......................... [Disabled]
CPU EIST Function ............................ [Disabled]
Virtualization Technology ................... [Enabled]
Bi-Directional PROCHOT ..................... [Enabled]


Uncore & QPI Features:
QPI Link Speed .............................. x48
Uncore Frequency .......................... auto
Isonchronous Frequency ..................[Enabled]


Standard Clock Control:
Base Clock (BCLK) Control ................ [Enabled]
BCLK Frequency (MHz) ..................... 133
PCI Express Frequency (MHz) ........... [100]

C.I.A.2 [Disabled]

Advanced Clock Control:
CPU Clock Drive ..............................[800mV]
PCI Express Clock Drive ................... [900mV]
CPU Clock Skew ............................. [0ps]
IOH Clock Skew ............................. [0ps]


Advanced DRAM Features:
Performance Enhance ...................... [Extreme]
Extreme Memory Profile (X.M.P) ......... [Disabled]
System Memory Multiplier (SPD) ........ [12.0]
DRAM Timing Selectable (SPD) .......... [Quick]

Channel A + B + C

Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ...................... 8
tRCD ....................................... 8
tRP ......................................... 8
tRAS ....................................... 24
CMD Rate.................................. 1


Advanced Voltage Control:

CPU
Load Line Calibration ................. [Enabled]
CPU Vcore ............................... 1.30000v
QPI/VTT Voltage 1.150v ............1.255v
CPU PLL 1.800v .......................1.800v

MCH/ICH
PCIE 1.500v ...........................1.500v
QPI PLL 1.100v .......................1.100v
IOH Core 1.100v .....................1.100v
ICH I/O 1.500v .......................1.500v
ICH Core 1.1v ........................1.100v

DRAM
DRAM Voltage 1.500v ..............1.640v
DRAM Termination 0.750v [AUTO]
Ch-A Data VRef. 0.750v [AUTO]
Ch-B Data VRef. 0.750v [AUTO]
Ch-C Data VRef. 0.750v [AUTO]
Ch-A Address VRef. 0.750v [AUTO]
Ch-B Address VRef. 0.750v [AUTO]
Ch-C Address VRef. 0.750v [AUTO]

[Lsdmeasap]

Re: Gigabyte GTX 295

Try this for 4.2Ghz

BSOD Error codes and what they mean:
0X00000050 << Incorrect Memory Timing/Freq or Uncore Multi
0X00000124 << Incorrect QPI/Vtt Voltage (To Much/Not Enough)
0X00000101 << Not enough Vcore Voltage

Advanced CPU Features:
CPU Clock Ratio ................................ [27x] << X21
Intel(R) Turbo Boost Tech .................. [Enabled] << Disabled
CPU Cores Enabled ............................ [All]
CPU Multi Threading .......................... [Enabled]
CPU Enhanced Halt (C1E) ................... [Disabled]
C3/C6/C7 State Support .................... [Disabled]
CPU Thermal Monitor ......................... [Disabled]
CPU EIST Function ............................ [Disabled]
Virtualization Technology ................... [Enabled]
Bi-Directional PROCHOT ..................... [Enabled]


Uncore & QPI Features:
QPI Link Speed .............................. x48 << X36
Uncore Frequency .......................... auto << X16-x18 (x18 would be best, but may take you some tweaking to work, try it first though)
Isonchronous Frequency ..................[Enabled]


Standard Clock Control:
Base Clock (BCLK) Control ................ [Enabled]
BCLK Frequency (MHz) ..................... 133 << 200
PCI Express Frequency (MHz) ........... [100]

C.I.A.2 [Disabled]

Advanced Clock Control:
CPU Clock Drive ..............................[800mV]
PCI Express Clock Drive ................... [900mV]
CPU Clock Skew ............................. [0ps]
IOH Clock Skew ............................. [0ps]


Advanced DRAM Features:
Performance Enhance ...................... [Extreme]
Extreme Memory Profile (X.M.P) ......... [Disabled]
System Memory Multiplier (SPD) ........ [12.0] << x8
DRAM Timing Selectable (SPD) .......... [Quick]

Channel A + B + C

Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ...................... 8
tRCD ....................................... 8
tRP ......................................... 8
tRAS ....................................... 24
CMD Rate.................................. 1


Advanced Voltage Control:

CPU
Load Line Calibration ................. [Enabled]
CPU Vcore ............................... 1.30000v << 1.35-1.425
QPI/VTT Voltage 1.150v ............1.255v << 1.35-1.45
CPU PLL 1.800v .......................1.800v << 1.84

MCH/ICH
PCIE 1.500v ...........................1.500v << 1.54-1.56
QPI PLL 1.100v .......................1.100v < 1.24-1.3
IOH Core 1.100v .....................1.100v << 1.20-1.24
ICH I/O 1.500v .......................1.500v << 1.58
ICH Core 1.1v ........................1.100v << 1.14-1.2

DRAM
DRAM Voltage 1.500v ..............1.640v << 1.66
DRAM Termination 0.750v [AUTO]
Ch-A Data VRef. 0.750v [AUTO]
Ch-B Data VRef. 0.750v [AUTO]
Ch-C Data VRef. 0.750v [AUTO]
Ch-A Address VRef. 0.750v [AUTO]
Ch-B Address VRef. 0.750v [AUTO]
Ch-C Address VRef. 0.750v [AUTO]

[Judge-dredd]

Re: Gigabyte GTX 295

would not even post with those settings