Problem with GA-EP45-DS3L

[alfars]

Hi

sorry about my English ..

I have problem with GA-EP45-DS3L Mb
I think it is from the ram , I have two OCZ XTC Platinum OCZ2P10662G dual

what is the best settings for this ram for the MB

I contacted with GIGABYTE support and they told me to load BIOS fail-safe default setting and test it

when I enter BIOS to modify setting after saving the settings the computer turn off and turn on automatically ..

[Chike]

Re: Problem with GA-EP45-DS3L

Normaly we recommend Optimized defaults.
Can you please post a screen capture of MemSet main and SPD(click spd) windows?
You can find MemSet in http://forums.tweaktown.com/f69/late...30/#post284762

[alfars]

Re: Problem with GA-EP45-DS3L

[alfars]

Re: Problem with GA-EP45-DS3L

another screenshot at 1066 because it was 800

[Chike]

Re: Problem with GA-EP45-DS3L

Try the following, load Optimized defaults, then change

DRAM Performance Control
Performance Enhance...................: [STANDARD]

MCH/ICH
MCH Core�����.....1.100V...........: 1.2 << Try 1.2-1.24v first then 1.05-0.95v if that does not help

Check ram voltage in PC Health Status after saving BIOS settings and reboot, if it is overvolted too much set it lower manually.

The second picture you posted is just right, you have any stability problems? What settings do you use for it?

[alfars]

Re: Problem with GA-EP45-DS3L

both are auto settings


the deference is the frequency 800 , 1066

I am running 1066 now , after setting the default setting fot BIOS and saving to exit the computer turn off and turn on again

also in windows I have blue screen , crash in programs

[Chike]

Re: Problem with GA-EP45-DS3L

Try my suggestions from post #5. More MCH Core maybe all you need.

[alfars]

Re: Problem with GA-EP45-DS3L

I tried

1.20 the computer shutdown after saving from BIOS
1.24 windows could not boot - Blue Screen

now with 0.95 and its ok

how I can be sure it is the correct settings
is there program to test ?


this is shots of the setting , its 1.24 in the picture but in BIOS now .95
Picasa Web Albums - maan2004 - Untitled Album

[Chike]

Re: Problem with GA-EP45-DS3L

Run 6+ passes of memtest86+ first, then 6+ hours of Prime95/Orthos blend torture or OCCT CPU:OCCT large or medium data set.

EDIT: Check tRD (Performance Level in MemSet), try set it to 6(Static tRead Value in BIOS) for both channels if it's higher. You can also try and set Driving Strength 1066 for both channels manually.

[Lsdmeasap]

Re: Problem with GA-EP45-DS3L

Also be sure you are setting your ram voltage manually to 2.1-2.2V