Announcement
Collapse
No announcement yet.
ep45-UD3P rev1.1 - f10i BIOS problem
Collapse
X
-
Re: ep45-UD3P rev1.1 - f10i BIOS problem
I flashed to that bios 10i and can't read the version or board info on cpuz.
But i am not prematurely blaming the bios.
edit: but my link is 16x on both cpuz spots, that info shows okay strange
But the bios info above it doesn't show.
also installed new nvidia video drivers though as well.
Now have no dmi pooling dos screen on start after the gigabyte screen either thats probably the new bios version.
I saw its updated properly using the tab key to 10iLast edited by Tyreman; 11-27-2009, 05:21 PM.Asus P8Z68-V PRO/GEN3 bios 3202
[email protected].
CM Hyper 212 EVO blademasters push-pull
8GB's Samsung 30nm tech ram 1.35v
EVGA GTX 460 superclocked plus (part# 1G-P3-1372-TR)
Seasonic X660
Canada
-
Re: ep45-UD3P rev1.1 - f10i BIOS problem
went back to 10f can read the mainboad tab on cpuz now.
Ram latencies back down from 80's to 60's
Gpuz is a crash BUT I did get newest nvidia drivers so that could be an issue with it.Last edited by Tyreman; 11-28-2009, 07:34 AM.Asus P8Z68-V PRO/GEN3 bios 3202
[email protected].
CM Hyper 212 EVO blademasters push-pull
8GB's Samsung 30nm tech ram 1.35v
EVGA GTX 460 superclocked plus (part# 1G-P3-1372-TR)
Seasonic X660
Canada
Comment
-
Re: ep45-UD3P rev1.1 - f10i BIOS problem
Yeah I'm kinda leaning that way to.
Or its vid drivers.Asus P8Z68-V PRO/GEN3 bios 3202
[email protected].
CM Hyper 212 EVO blademasters push-pull
8GB's Samsung 30nm tech ram 1.35v
EVGA GTX 460 superclocked plus (part# 1G-P3-1372-TR)
Seasonic X660
Canada
Comment
-
Re: ep45-UD3P rev1.1 - f10i BIOS problem
Can't get gpuz to run it wont open up.
gave error report.
when i had it running the lanes were fine here.Last edited by Tyreman; 11-28-2009, 08:23 AM.Asus P8Z68-V PRO/GEN3 bios 3202
[email protected].
CM Hyper 212 EVO blademasters push-pull
8GB's Samsung 30nm tech ram 1.35v
EVGA GTX 460 superclocked plus (part# 1G-P3-1372-TR)
Seasonic X660
Canada
Comment
-
Re: ep45-UD3P rev1.1 - f10i BIOS problem
Top copy and paste of error log.
GPU-Z.0.3.7 caused an Access Violation (0xc0000005)
in module GPU-Z.0.3.7.exe at 001b:004c58e7.
Exception handler called in AfxWinMain.
Error occurred at 11/28/2009 09:33:04.
C:\Users\Rush\Downloads\GPU-Z.0.3.7.exe, run by Rush.
Operating system: unknown Windows version (6.0.6002).
2 processor(s), type 586.
27% memory in use.
2048 MBytes physical memory.
2048 MBytes physical memory free.
0 MBytes paging file.
0 MBytes paging file free.
2048 MBytes user address space.
1858 MBytes user address space free.
Read from location 00000000 caused an access violation.Asus P8Z68-V PRO/GEN3 bios 3202
[email protected].
CM Hyper 212 EVO blademasters push-pull
8GB's Samsung 30nm tech ram 1.35v
EVGA GTX 460 superclocked plus (part# 1G-P3-1372-TR)
Seasonic X660
Canada
Comment
-
Re: ep45-UD3P rev1.1 - f10i BIOS problem
You may be able to find an answer from the guys at the GPU-z forum about this error
GPU-Z - techPowerUp! Forums
Comment
-
Re: ep45-UD3P rev1.1 - f10i BIOS problem
Aha!!
went to your link and downloaded the test Build it works fine!!!!
No error or crash.
They even mention nvidia stuff.
As you know i was suspicious of graphics drivers.
Thanks for helping.Asus P8Z68-V PRO/GEN3 bios 3202
[email protected].
CM Hyper 212 EVO blademasters push-pull
8GB's Samsung 30nm tech ram 1.35v
EVGA GTX 460 superclocked plus (part# 1G-P3-1372-TR)
Seasonic X660
Canada
Comment
-
Re: ep45-UD3P rev1.1 - f10i BIOS problem
I joined their forum to let them know.
Thanks for helping.Asus P8Z68-V PRO/GEN3 bios 3202
[email protected].
CM Hyper 212 EVO blademasters push-pull
8GB's Samsung 30nm tech ram 1.35v
EVGA GTX 460 superclocked plus (part# 1G-P3-1372-TR)
Seasonic X660
Canada
Comment
Comment