Hi All, I'm trying to tweak my brand new motherboard! I'm really liking it so far, but i'm a bit stuck on my OC.
Trying to keep all power-saving & turbo features enabled, and get the max stable OC possible. Its running at around 3.45ghz with std multiplier (x22) upto around 4ghz with only one thread(x26). If i raise the bclk one more (from 157 to 158) i get random freezes (eventho linx can do 20 passes). What can i try to get a bit higher? My goal is to reach about 165/170 bclk & 4.5ghz with max multiplier (x26) Temperatures are still really safe & around 70c on full linx load.
My setup;
Mobo... Gigabyte GA-P55A-UD4, bios F5
RAM... Kingston 4GB DDR2000 Cas 8 Kit (KHX2000C8D3T1K2/4GX)
CPU... Intel Core i7 860
Cooler... TRUE Rev.C dual fan
GFX... ATI Radeon 4850
HDD... Samsung Spinpoint F1 750gb x2 (raid)
Case... CM Storm Scout
PSU... Corsair HX520
Basic Bios settings changed;
Intel(R) Turbo Boost Tech................[Enabled]
CPU Cores Enabled........................[All]
CPU Multi-Threading......................[Enabled]
CPU Enhanced Halt (C1E)..................[Enabled]
C3/C6/C7 State Support...................[Enabled]
CPU Thermal Monitor......................[Auto]
CPU EIST Function........................[Enabled]
Bi-Directional PROCHOT...................[Auto]
QPI Clock Ratio..........................[Auto]
QPI Link Speed........................
Uncore Clock Ratio....................[32x]
Uncore Frequency.........................
>>>>> Standard Clock Control <<<<<
Base Clock (BCLK) Control................[Enabled]
BCLK Frequency ..........................[157]
Extreme Memory Profile (X.M.P.)..........[Disabled]
System Memory Multiplier (SPD)...........[10.0]
Memory Frequency (MHz)................1570
PCI Express Frequency (MHz)..............[100]
C.I.A.2..................................[Disabled]
>>>>> Advanced Clock Control <<<<<
CPU Clock Drive..........................[ 800mV]
PCI Express Clock Drive..................[ 900mV]
CPU Clock Skew...........................[ 0ps]
Advanced Memory Settings:
Extreme Memory Profile (X.M.P.)..........[Disabled]
System Memory Multiplier (SPD)...........[10.0]
Memory Frequency (MHz)................1570
Performance Enhance (SPD)............. [Standard]
DRAM Timing Selectable (SPD)............ [Quick]
Profile DDR Voltage .................. 1.5V
Profile QPI Voltage .................. 1.1V
Channel Interleaving.....................[Auto]
Rank Interleaving........................[Auto]
>>>>> Channel A & B
Channel A Timing Settings [Press Enter]:
Cas Latency Time........................[6]
tRCD....................................[6]
tRP.....................................[6]
tRAS...................................[18]
>>>>> Advanced Timing Control
tRC....................................[Auto]
tRRD...................................[Auto]
tWTR...................................[Auto]
tWR....................................[Auto]
tWTP...................................[Auto]
tWL....................................[Auto]
tRFC...................................[Auto]
tRTP...................................[Auto]
tFAW...................................[Auto]
Command Rate (CMD).................. 1 [Auto]
>>>>> Misc Timing Control
B2B Cas Delay..........................[Auto]
Round Trip Latency.....................[Auto]
Channel A Turnaround Settings [Press Enter]:
Different DIMMs........................[Auto]
Different DIMMs........................[Auto]
On The Same Rank.......................[Auto]
>>>>> Channel A Writes Followed By Writes
Different DIMMs........................[Auto]
Different DIMMs........................[Auto]
On The Same Rank.......................[Auto]
Advanced Voltage Settings:
******Mother Board Voltage Control ******
Voltage Types............Normal......Current
--------------------------------------------
>>> CPU
Load Line Calibration...................[Enabled]
CPU Vcore..................1.25625V..[normal]
[+1.0000v]
QPI/VTT Voltage..........1.100v.....[1.36v]
PCH Core....................1.050v.....[1.05v]
CPU PLL......................1.800v.....[1.8v]
>>> DRAM
DRAM Voltage..............1.500v.....[1.660v]
DRAM Termination.........0.750v.....[Auto]
Ch-A Data VRef............0.750v.....[Auto]
Ch-A Data VRef............0.750v.....[Auto]
Ch-B Data VRef............0.750v.....[Auto]
Ch-B Data VRef............0.750v.....[Auto]
Miscellaneous Settings:[/SIZE]
Isochronous Support....................[Enabled]
Virtualisation technology..............[Disabled]
Trying to keep all power-saving & turbo features enabled, and get the max stable OC possible. Its running at around 3.45ghz with std multiplier (x22) upto around 4ghz with only one thread(x26). If i raise the bclk one more (from 157 to 158) i get random freezes (eventho linx can do 20 passes). What can i try to get a bit higher? My goal is to reach about 165/170 bclk & 4.5ghz with max multiplier (x26) Temperatures are still really safe & around 70c on full linx load.
My setup;
Mobo... Gigabyte GA-P55A-UD4, bios F5
RAM... Kingston 4GB DDR2000 Cas 8 Kit (KHX2000C8D3T1K2/4GX)
CPU... Intel Core i7 860
Cooler... TRUE Rev.C dual fan
GFX... ATI Radeon 4850
HDD... Samsung Spinpoint F1 750gb x2 (raid)
Case... CM Storm Scout
PSU... Corsair HX520
Basic Bios settings changed;
Intel(R) Turbo Boost Tech................[Enabled]
CPU Cores Enabled........................[All]
CPU Multi-Threading......................[Enabled]
CPU Enhanced Halt (C1E)..................[Enabled]
C3/C6/C7 State Support...................[Enabled]
CPU Thermal Monitor......................[Auto]
CPU EIST Function........................[Enabled]
Bi-Directional PROCHOT...................[Auto]
QPI Clock Ratio..........................[Auto]
QPI Link Speed........................
Uncore Clock Ratio....................[32x]
Uncore Frequency.........................
>>>>> Standard Clock Control <<<<<
Base Clock (BCLK) Control................[Enabled]
BCLK Frequency ..........................[157]
Extreme Memory Profile (X.M.P.)..........[Disabled]
System Memory Multiplier (SPD)...........[10.0]
Memory Frequency (MHz)................1570
PCI Express Frequency (MHz)..............[100]
C.I.A.2..................................[Disabled]
>>>>> Advanced Clock Control <<<<<
CPU Clock Drive..........................[ 800mV]
PCI Express Clock Drive..................[ 900mV]
CPU Clock Skew...........................[ 0ps]
Advanced Memory Settings:
Extreme Memory Profile (X.M.P.)..........[Disabled]
System Memory Multiplier (SPD)...........[10.0]
Memory Frequency (MHz)................1570
Performance Enhance (SPD)............. [Standard]
DRAM Timing Selectable (SPD)............ [Quick]
Profile DDR Voltage .................. 1.5V
Profile QPI Voltage .................. 1.1V
Channel Interleaving.....................[Auto]
Rank Interleaving........................[Auto]
>>>>> Channel A & B
Channel A Timing Settings [Press Enter]:
Cas Latency Time........................[6]
tRCD....................................[6]
tRP.....................................[6]
tRAS...................................[18]
>>>>> Advanced Timing Control
tRC....................................[Auto]
tRRD...................................[Auto]
tWTR...................................[Auto]
tWR....................................[Auto]
tWTP...................................[Auto]
tWL....................................[Auto]
tRFC...................................[Auto]
tRTP...................................[Auto]
tFAW...................................[Auto]
Command Rate (CMD).................. 1 [Auto]
>>>>> Misc Timing Control
B2B Cas Delay..........................[Auto]
Round Trip Latency.....................[Auto]
Channel A Turnaround Settings [Press Enter]:
Different DIMMs........................[Auto]
Different DIMMs........................[Auto]
On The Same Rank.......................[Auto]
>>>>> Channel A Writes Followed By Writes
Different DIMMs........................[Auto]
Different DIMMs........................[Auto]
On The Same Rank.......................[Auto]
Advanced Voltage Settings:
******Mother Board Voltage Control ******
Voltage Types............Normal......Current
--------------------------------------------
>>> CPU
Load Line Calibration...................[Enabled]
CPU Vcore..................1.25625V..[normal]
[+1.0000v]
QPI/VTT Voltage..........1.100v.....[1.36v]
PCH Core....................1.050v.....[1.05v]
CPU PLL......................1.800v.....[1.8v]
>>> DRAM
DRAM Voltage..............1.500v.....[1.660v]
DRAM Termination.........0.750v.....[Auto]
Ch-A Data VRef............0.750v.....[Auto]
Ch-A Data VRef............0.750v.....[Auto]
Ch-B Data VRef............0.750v.....[Auto]
Ch-B Data VRef............0.750v.....[Auto]
Miscellaneous Settings:[/SIZE]
Isochronous Support....................[Enabled]
Virtualisation technology..............[Disabled]
Comment