If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Do you have a full bios Listing Noc?
I might try some experimentation myself from your settings
Well the good news is the 8GB doesnt seem to be making it any harder to overclock.
Just on the cpu core V I remember using 1.34 approx in bios at 490 cpu ref and it seemed to be ok for a long time,but then I got some error in testing.
I eventually settled on using voltages /settings that tested ok at approx 5mhz
cpu ref higher than I wanted.
Ie my settings in sig and what I have posted for 500 cpu ref will work under testing at 505 or 4.04Ghz for the cpu,but anything above 507 and errors can occur.
Anything higher than that,I have to really ramp things up.
My reasoning is : go for settings that will hold a slightly higher overclock than what you need then drop the overclock down a little.
Kick,
Yeah I will post the rest of my settings when I get back in the country. I am currently in Berlin for a job interview. I think my reads are at 12 instead of 9 and I could set my ram to Turbo as it would never boot. Should be Thurs/Fri.
Comment