Announcement

Collapse
No announcement yet.

GA-EP45-UD3P and four sticks of memory

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: GA-EP45-UD3P and four sticks of memory

    I saw some mention in another thread about some special way to clear the CMOS. Could someone either explain it or leave a link so I can find it. Thanks.
    GA-EP45-UD3P rev. 1.6, Bios FB
    E8400
    G Skill F2-9600CL5D-4GBTD (x2)
    Asus HD4850
    Vista x64 Ultimate

    Comment


    • #17
      Re: GA-EP45-UD3P and four sticks of memory

      Second part of http://forums.tweaktown.com/f69/bios...76/#post258596

      Comment


      • #18
        Re: GA-EP45-UD3P and four sticks of memory

        Originally posted by whtlightning View Post
        I have a GA-EP45-UD3P and four sticks of G Skill F2-9600CL5D memory. I can run any two of the sticks in either the red or the yellow slots. They pass memtest and run Vista just fine. My problem arises when I try to install MORE than two sticks. The system runs just fine with 4 Gb installed but will not run with 6 or 8Gb. No way, no how. I have tried BIOS settings from the G Skill forum and from this site. I have attached my BIOS setup. Please, someone has to have an answer. Thanks.
        I have run 8gb 800mhz optimized defaults dram @ 1.8v mch core @ 1.100v. passed 24hrs memtest86+ 4.00. Running 8gb @ 1066 would be very hard. At that speed it sounds like you need at least 1.28+ mch 0.740 mch reference.

        p45 ud3p 1.6 fb stable but fd fails or is it just my ocz incompatibility?!? This guy has problems uniquely similar to mine. I'm starting to think this ocz brand is just not that great. JR P45 driving me crazy!


        MB Rev: ga-ep45-ud3p 1.6 Bios Ver: fd
        Cpu:E8400 Wolfdale 3.0GHz 6MB
        Ram:OCZ Reaper HPC 2x2GB DDR2 1066 Dual Channel Kit
        PSU:Antec EA500
        Chipset: Thermalright HR-05 SLI/IFX
        SB: TT Extreme Spirit II

        Comment

        Working...
        X