New bild GA-EX58-UD3R RAM SETTINGS

[DEMUZ]

Hi!
I have a problem with ram settings in bios i think!.
The system only runs in defult mode,but when i turn upp the profile1 mode upp to 1600mhz
the conputer starts but son justs frezzes,can anyone help plz..
RAM IS TR3X3G1600C8D
CPU:INTEL I7 2,66MHZ
grafic GTS 260
poWer Corsair 550w
Wd raptor 74gb

Plz help anyone

[Lsdmeasap]

Re: New bild GA-EX58-UD3R RAM SETTINGS

What BIOS?

[DEMUZ]

Re: New bild GA-EX58-UD3R RAM SETTINGS

Bios are FB !

[Lsdmeasap]

Re: New bild GA-EX58-UD3R RAM SETTINGS

So you have revision 1.6 board? If so...

Please first update your BIOS to F4D

http://www.fileden.com/files/2008/7/28/2024082/EX58UD3R.F4D.zip

Please read this guide and use Qflash to update NOT @BIOS >>

http://forums.tweaktown.com/f69/bios-flashing-how-qflash-guide-27576/

Then after you have loaded optimized ect, and are done with your flash try things again and if you do not have any luck please see the link in my signature and get a BIOS Template then give us your settings.

I advise against XMP use so you know, you need to set things manually and find your own stable QPI/Vtt voltage along with many other things.

[DEMUZ]

Re: New bild GA-EX58-UD3R RAM SETTINGS

I updated to latest beta same thing happend...
Cant you tell the settings ? or most i download the tenplate!.

[Lsdmeasap]

Re: New bild GA-EX58-UD3R RAM SETTINGS

Here is settings for stock per your hardware >>

Load optimized defaults first

This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

0X00000050 << Incorrect Memory Timing/Freq or Uncore Multi
0X00000124 << Incorrect QPI/Vtt Voltage (To Much/Not Enough)
0X00000101 << Not enough Vcore Voltage

CPU = Model #
Motherboard = Model, Revision #
BIOS Version =
Ram = Brand, Model#, Part#, And or Link

[B]Advanced CPU Features:[/B]
CPU Clock Ratio ................................ [20x]
Intel(R) Turbo Boost Tech .................. [Enabled]
CPU Cores Enabled ............................ [All]
CPU Multi Threading .......................... [Enabled]
CPU Enhanced Halt (C1E) ................... [Disabled]
C3/C6/C7 State Support .................... [Disabled]
CPU Thermal Monitor ......................... [Enabled]
CPU EIST Function ............................ [Disabled]
Virtualization Technology ................... [Enabled] << Disabled if you do not use Vmware or Virtual PC Programs
Bi-Directional PROCHOT ..................... [Enabled]


[B]Uncore & QPI Features:[/B]
QPI Link Speed .............................. x36
Uncore Frequency ..........................  24-26 (Always 2x memory Multi or 2x +1, 2x +2, ect) 
Isonchronous Frequency ..................[Enabled]


[B]Standard Clock Control:[/B]
Base Clock (BCLK) Control ................ [Enabled]
BCLK Frequency (MHz) ..................... 133
PCI Express Frequency (MHz) ........... [100]

C.I.A.2 [Disabled]

[B]Advanced Clock Control:[/B]
CPU Clock Drive ..............................[800mV]
PCI Express Clock Drive ................... [900mV]
CPU Clock Skew ............................. [0ps]
IOH Clock Skew ............................. [0ps]


[B]Advanced DRAM Features:[/B]
Performance Enhance ...................... [Standard]
Extreme Memory Profile (X.M.P) ......... [Disabled]
System Memory Multiplier (SPD) ........ [AUTO] << Set 12 (12 x 133 = 1600Mhz Ram speed)
DRAM Timing Selectable (SPD) .......... [Manual]

[B]Channel A + B + C

Channel A Timing Settings:[/B]
##Channel A Standard Timing Control##
CAS Latency Time ......................8
tRCD .......................................8
tRP .........................................8
tRAS .......................................24

Below values may be left in Auto if you like, generally this is fine.  For those users who DO Set advanced timings manually, please see some of my thoughts and findings about these settings and rules here
[url=http://www.xtremesystems.org/forums/showpost.php?p=3969957&postcount=3615]XtremeSystems Forums - View Single Post - Gigabyte EX58-UD5/Extreme Discussion Thread[/url]


##Channel A Advanced Timing Control##
tRC ........................................  (Should be = tRAS + tRP or above for stability)
tRRD .......................................
tWTR ...................................... (Must be Write to Read Delay/Same Rank - (tWL + 4)
tWR ........................................ 5-12 (Odd # values likely will fail)
tWTP .......................................    (tWTP Must = tWR + tWL + 4)
tWL ........................................   (tWL Must be CAS Latency -1)
tRFC .......................................
tRTP .......................................
tFAW ......................................
Command Rate (CMD) ................

##Channel A Misc Timing Control##
Round Trip Latency ...................



[B]Advanced Voltage Control:

CPU[/B]
Load Line Calibration ................. [Disabled]
CPU Vcore ............................... Auto
QPI/VTT Voltage 1.150v ............ Auto or set 1.2-1.38
CPU PLL 1.800v ....................... Auto

[B]MCH/ICH[/B]
PCIE 1.500v ........................... Auto
QPI PLL 1.100v ....................... 1.2-1.24
IOH Core 1.100v ..................... 1.2-1.24
ICH I/O 1.500v ....................... Auto
ICH Core 1.1v ........................ Auto

[B]DRAM[/B]
DRAM Voltage 1.500v .............. 1.66
DRAM Termination 0.750v [AUTO]
Ch-A Data VRef. 0.750v [AUTO]
Ch-B Data VRef. 0.750v [AUTO]
Ch-C Data VRef. 0.750v [AUTO]
Ch-A Address VRef. 0.750v [AUTO]
Ch-B Address VRef. 0.750v [AUTO]
Ch-C Address VRef. 0.750v [AUTO]

[DEMUZ]

Re: New bild GA-EX58-UD3R RAM SETTINGS

Advanced CPU Features:
CPU Clock Ratio ................................ [20x]
Intel(R) Turbo Boost Tech .................. [Enabled]
CPU Cores Enabled ............................ [All]
CPU Multi Threading .......................... [Enabled]
CPU Enhanced Halt (C1E) ................... [Enabled]
C3/C6/C7 State Support .................... [Disabled]
CPU Thermal Monitor ......................... [Enabled]
CPU EIST Function ............................ [Enabled]
Virtualization Technology ................... [Enabled] << Disabled if you do not use Vmware or Virtual PC Programs
Bi-Directional PROCHOT ..................... [Enabled]


Uncore & QPI Features:
QPI Link Speed .............................. 4.8GHz
Uncore Frequency .......................... 2667MHz (Always 2x memory Multi or 2x +1)
Isonchronous Frequency ..................[Didnt find]


Standard Clock Control:
Base Clock (BCLK) Control ................ [Disabled]
BCLK Frequency (MHz) ..................... 133
PCI Express Frequency (MHz) ........... [Auto]

C.I.A.2 [Disabled]

Advanced Clock Control:
CPU Clock Drive ..............................[800mV]
PCI Express Clock Drive ................... [900mV]
CPU Clock Skew ............................. [0ps]
IOH Clock Skew ............................. [0ps]


Advanced DRAM Features:
Performance Enhance ...................... [Turbo]
Extreme Memory Profile (X.M.P) ......... [Disabled]
System Memory Multiplier (SPD) ........ [AUTO]
DRAM Timing Selectable (SPD) .......... [AUTO]

Channel A + B + C

Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ...................... 8 Auto
tRCD ....................................... 8 Auto
tRP ......................................... 8 Auto
tRAS ....................................... 20 Auto

Below values may be left in Auto if you like, generally this is fine. For those users who DO Set advanced timings manually, please see some of my thoughts and findings about these settings and rules here
XtremeSystems Forums - View Single Post - Gigabyte EX58-UD5/Extreme Discussion Thread

##Channel A Advanced Timing Control##
tRC ........................................ 27 Auto (Should be = tRAS + tRP or above for stability)
tRRD ....................................... 4 Auto
tWTR ...................................... 4 Auto (Must be Write to Read Delay/Same Rank - (tWL + 4)
tWR ........................................ 8 Auto
tWTP ....................................... 19 Auto (tWTP Must = tWR + tWL + 4)
tWL ........................................ 7 Auto (tWL Must be CAS Latency -1)
tRFC ....................................... 60 Auto
tRTP ....................................... 4 Auto
tFAW ...................................... 20 Auto
Command Rate (CMD) ................ 1 Auto

##Channel A Misc Timing Control##
Round Trip Latency ................... 51 Auto



Advanced Voltage Control:

CPU
Load Line Calibration ................. [Disabled]
CPU Vcore ............................... Auto
QPI/VTT Voltage 1.150v ............ Auto
CPU PLL 1.800v ....................... Auto

MCH/ICH
PCIE 1.500v ........................... Auto
QPI PLL 1.100v ....................... Auto
IOH Core 1.100v ..................... Auto
ICH I/O 1.500v ....................... Auto
ICH Core 1.100v ........................ Auto

DRAM
DRAM Voltage 1.500v .............. Auto
DRAM Termination 0.750v [AUTO]
Ch-A Data VRef. 0.750v [AUTO]
Ch-B Data VRef. 0.750v [AUTO]
Ch-C Data VRef. 0.750v [AUTO]
Ch-A Address VRef. 0.750v [AUTO]
Ch-B Address VRef. 0.750v [AUTO]
Ch-C Address VRef. 0.750v [AUTO]

[wazza300]

Re: New bild GA-EX58-UD3R RAM SETTINGS

for stock just keep everything on auto exept ram voltage set it to 1.66 in the bios and set ram multi to give u or as close to 1600mhz dont go above rated speed tho or it'll cause crashes keep timings on auto

[Lsdmeasap]

Re: New bild GA-EX58-UD3R RAM SETTINGS

I gave you stock settings above to use, did you miss understand that I intended for you to try those out?

Please do try the settings I posted above, sorry I should have removed the "This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours" comment, I did mean for you to use those not to give me your settings.

[DEMUZ]

Re: New bild GA-EX58-UD3R RAM SETTINGS

I gave you stock settings above to use, did you miss understand that I intended for you to try those out?

Please do try the settings I posted above, sorry I should have removed the "This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours" comment, I did mean for you to use those not to give me your settings.

ookay so i shall test those settings that you posted the first time:S?

[Lsdmeasap]

Re: New bild GA-EX58-UD3R RAM SETTINGS

Yes please do. Sorry to have confused you by leaving that part of my template that asked for your settings!!

Let us know how you get along, if you have problems please post back the exact settings in full you tried that failed and I will advise back

[DEMUZ]

Re: New bild GA-EX58-UD3R RAM SETTINGS

Ok ..im in and going but,Uncore Frequency .......................... 24-26 (Always 2x memory Multi or 2x +1, 2x +2, ect)?? can i go for any setting 24 or 26 waths the diffrens of the setting? and the voltage 1.5 or 1.65??
Demuz!!

[DEMUZ]

Re: New bild GA-EX58-UD3R RAM SETTINGS

Its not all the way have played 3 games al of them stop woking in the game but running 3dmark06 perfect!!
Is there somthing else to do to those settings?

[DEMUZ]

Re: New bild GA-EX58-UD3R RAM SETTINGS

Please can you help me Lsdmeasap!

[wazza300]

Re: New bild GA-EX58-UD3R RAM SETTINGS

did you set ram volt to 1.66 and qpi volt to 1.25? you can use looser ram timings 8-8-8-24 or 8-8-8-26 ,and you can set qpi uncore to auto and qpi-link speed to auto and see if you are more stable