4x1 gb ram problem

[ther]

I have got 4x1gb kingston hyperx ram.
I didn't open this thread to kingston section because i've tested rams one by one with orthos and memtest86.

My motherboard is EP35C-DS3R

Problem occurs only when i use all rams(4x1gb).
When i use two slots(2x1gb) or one slot(1gb) no problem.
But using 4 slots gives error in orthos.

Error message is like this:
"FATAL ERROR: Rounding was 0.494422011, expected less than 0.4."
It gives this error just in ten seconds.

What can i do except of rma? I've already rma'd this board..

Note:System isn't overclocked.

[Lsdmeasap]

Re: 4x1 gb ram problem

Please give me your full specs and BIOS settings, link in my signature for a template. 4x1GB needs some BIOS adjustments to run stable, that is all you likely need to do since you have tested the ram and they run fine by themselves.

I can advise once you fill out a template and give your specs, please do link the ram or give model # as well

Thanks