UD4P no power up

[SystemViper]

HI, i have been running my UD4P for a while now, with no problems.
Yesterday, i turn off and hit the cmos button on the back of the motherboard in the area with the usb and all connectors.

from this point forward, no matter what i do it will not turn on.

I power the board up and the blue lights come on and also the power switch on the board lights up blue, but nothing happens.

I push the on button -nothing
I put a on switch in and still - nothing
tried 2 different PS's
tries 2 different cpu's

tried several ram sticks.

it's like the board is getting power but it won't start when any start button is pushed...

any help is appriciated....

[Lsdmeasap]

Re: UD4P no power up

Since you have tried multiple CPU's can you please now check closely for Bent CPU Pins? This will cause a non Boot for sure. If you do not have any bent pins please try clearing the CMOS again using the jumper method outlined here in post #2 then try to start the board with only one stick of ram, that should reset it to defaults.

If you still have no luck you are going to need to get the board out of the case, and off the motherboard tray and try with the bare minimum of CPU/Heatsink, One stick of ram, and your GFX Card ONLY.