I have originally set my system up along the same lines as poster Outer Marker did with his E8400 system - overclocking the system while using stock or close to stock voltages.
Since I was going to have to increase MCH core voltage to accommodate 2X2Gig ram, I figured I might as well get some frequency out of the FSB as well.
I bumped up CPU Core and Termination just a hair to cover the bases.
I have not run Prime95 on this set up yet, have run memtest default for 20 minutes and Flight Simulator X (which hammers CPU and Ram pretty well)for a couple of hours with no problem.
Before I continue with a full on abuse test, I was wondering if ProfJim, Lsdmeasap or Psycho101 had any thoughts.
My goal is a mild to medium overclock with stability being most important.
BTW, this is probably the best forum on the net that I have seen with regards to computers and overclocking. Thanks to all the brains here.
![Sun Smiley](https://www.tweaktownforum.com/core/images/smilies/sun_smiley.gif)
Since I was going to have to increase MCH core voltage to accommodate 2X2Gig ram, I figured I might as well get some frequency out of the FSB as well.
I bumped up CPU Core and Termination just a hair to cover the bases.
I have not run Prime95 on this set up yet, have run memtest default for 20 minutes and Flight Simulator X (which hammers CPU and Ram pretty well)for a couple of hours with no problem.
Before I continue with a full on abuse test, I was wondering if ProfJim, Lsdmeasap or Psycho101 had any thoughts.
My goal is a mild to medium overclock with stability being most important.
BTW, this is probably the best forum on the net that I have seen with regards to computers and overclocking. Thanks to all the brains here.
![Sun Smiley](https://www.tweaktownforum.com/core/images/smilies/sun_smiley.gif)
Code:
MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster .............: [ Auto ] CPU Clock Ratio .....................: 8 X Fine CPU Clock Ratio.................: 0 CPU Frequency .......................: 3.60GHZ (450x8) Clock Chip Control Standard Clock Control CPU Host Clock Control...............: [ Enabled ] CPU Host Frequency (Mhz) ............: 450 PCI Express Frequency (Mhz) .........: 100 C.I.A.2 .............................: [ Disabled ] Advanced Clock Control [Press Enter] CPU Clock Drive......................: [ 800 mV ] PCI Express Clock Drive..............: [ 900mV ] CPU Clock Skew (ps)..................: [ 0ps ] MCH Clock Skew (ps)..................: [ 0ps ] DRAM Performance Control Performance Enhance..................: [ STANDARD ] (G)MCH Frequency Latch...............: [ AUTO ] System Memory Multiplier ............: 3.33D Memory Frequency (Mhz) ..............: 1500 DRAM Timing Selectable ..............: [ Manual ] Standard Timing Control CAS Latency Time.....................: 7 tRCD ................................: 7 tRP'.................................: 7 tRAS.................................: 15 Advanced Timing Control tRRD.................................: 5 tWTR.................................: 5 tWR..................................: 10 tRFC.................................: 70 tRTP.................................: 5 Command Rate (CMD) ..................: 2 Channel A Static tRead Value...................: 8 tRD Phase0 Adjustment................: 0 [ AUTO ] tRD Phase1 Adjustment................: 0 [ AUTO ] tRD Phase2 Adjustment ...............: 0 [ AUTO ] tRD Phase3 Adjustment................: 0 [ AUTO ] Trd2rd(Different Rank)...............: 9 [ AUTO ] Twr2wr(Different Rank)...............: 7 [ AUTO ] Twr2rd(Different Rank)...............: 8 [ AUTO ] Trd2wr(Same/Diff Rank)...............: 8 [ AUTO ] Channel B Static tRead Value...................: 8 tRD Phase0 Adjustment................: 0 [ AUTO ] tRD Phase1 Adjustment................: 0 [ AUTO ] tRD Phase2 Adjustment ...............: 0 [ AUTO ] tRD Phase3 Adjustment................: 0 [ AUTO ] Trd2rd(Different Rank)...............: 9 [ AUTO ] Twr2wr(Different Rank)...............: 7 [ AUTO ] Twr2rd(Different Rank)...............: 8 [ AUTO ] Trd2wr(Same/Diff Rank)...............: 8 [ AUTO ] Motherboard Voltage Control Voltage Type............... CPU CPU Vcore............................: 1.25625V CPU Termination�.....................: 1.220V CPU PLL..............................: 1.570V CPU Referen..........................: 0.760V [ AUTO ] MCH/ICH MCH Core.............................: 1.240V MCH Reference........................: 0.760V [ AUTO ] MCH/DRAM Ref.........................: 0.750V [ AUTO ] ICH I/O......................�.......: 1.570V DRAM DRAM Voltage ........................: 1.880V DRAM Termination ....................: 0.750V [ AUTO ] Ch-A DATA VRef.......................: 0.750V [ AUTO ] Ch-B DATA VRef.......................: 0.750V [ AUTO ] Ch-A Address VRef....................: 0.750V [ AUTO ] Ch-B Address VRef....................: 0.750V [ AUTO ] Advanced Settings Limit CPUID Max. to 3...............: [ DISABLED ] No-Execute Memory Protect...........: [ ENABLED ] Load-Line Calibration...............: [ DISABLED ] CPU Enhanced Halt (C1E).............: [ DISABLED ] CPU Thermal Monitor 2(TM2) .........: [ ENABLED ] CPU EIST Function...................: [ DISABLED ] Virtualization Technology...........: [ ENABLED ] USB Legacy Support..................: [ DISABLED ]
Comment