Hi everybody,
i have big problem with this board.I can not understand why.I try everything but i can not solved my problem.sometimes it can be opened with 166 Bclk 3486 mhz (with Turbo).Everything is OK when tested.6-8 hours stress test is OK.Memory test is OK.After shut down my comp. i can not open again.it says everytime (OC failed ).When i try to load bios setting.It can not open again.I tried 2 PSU.I think this is not simple PSU problem.And i tried everything.Other new VGA but I think this is really mainboard problem.When i try 10-15 times.Sometimes it can be open.
I tried F4-F5-F6 bios.But my problem can not be solved.When i try Bclk 150 eveytime it can be open without OC failed.What is this problem.I tried 3x2gb , 2x2 gb my problem is same.I tried manual ram setting (advanced setting ) everthing is same.I tried slow ram setting all is same i tried 9-10-10-25 ( 1333mhz) same problem.i tried 10-10-10-25 same problem..i tried 9-9-9-24 same problem.i tried 1066 mhz everything is same.There is big cold boot problem. Who can use with bclk 150 or higher? I think this is ULTRA Cancer
gigabyte Ud5p mainboard
i7 920 D0 stepping
corsair 1333 mhz 9-9-9-24 6x2 Gb
Silverstone OP800 800w PSU
ZOTAC GTX260 2
WD 1tb HDD
i have big problem with this board.I can not understand why.I try everything but i can not solved my problem.sometimes it can be opened with 166 Bclk 3486 mhz (with Turbo).Everything is OK when tested.6-8 hours stress test is OK.Memory test is OK.After shut down my comp. i can not open again.it says everytime (OC failed ).When i try to load bios setting.It can not open again.I tried 2 PSU.I think this is not simple PSU problem.And i tried everything.Other new VGA but I think this is really mainboard problem.When i try 10-15 times.Sometimes it can be open.
I tried F4-F5-F6 bios.But my problem can not be solved.When i try Bclk 150 eveytime it can be open without OC failed.What is this problem.I tried 3x2gb , 2x2 gb my problem is same.I tried manual ram setting (advanced setting ) everthing is same.I tried slow ram setting all is same i tried 9-10-10-25 ( 1333mhz) same problem.i tried 10-10-10-25 same problem..i tried 9-9-9-24 same problem.i tried 1066 mhz everything is same.There is big cold boot problem. Who can use with bclk 150 or higher? I think this is ULTRA Cancer
gigabyte Ud5p mainboard
i7 920 D0 stepping
corsair 1333 mhz 9-9-9-24 6x2 Gb
Silverstone OP800 800w PSU
ZOTAC GTX260 2
WD 1tb HDD
Comment