Motherboard: GIGABYTE GA-MA770-UD3 (Rev 1.0)
BIOS: Award Software International, Inc. F4, 12/31/2008
CPU: AMD Athlon X2 4850e
Memory: G.SKILL F2-8500CL5D-4GBPK (DDR2 1066)
HDD: WD Caviar SE16 WD3200AAKS
Optical Drive: Samsung SH-S223Q
Power Supply: Rosewill RD500-2DB
Operating System: WinXP Pro SP3
I have one SATA hard drive connected to SATAll0 on the motherboard. I am not going to use RAID. Why is my hard drive displaying as SCSI in Windows XP Device Manager, even though I loaded the SATA driver from floppy during the OS install on the new HDD?
These are the settings I chose for install:
When I created the Driver Diskette from the GIGABYTE installation drivers disk for Windows XP Pro, I chose number 5 from the following options:
1)GIGABYTE SATA-RAID Driver(x86)
2)GIGABYTE SATA-RAID Driver(x64)
3)SB600 SATA
4)SB600 SATA(Vista)
5)SB700/750 SATA
0)exit
These are my SATA settings from the BIOS Integrated Peripherals:
OnChip SATA Controller [Enabled]
OnChip SATA Type [AHCI]
OnChip SATA Port4/5 [IDE]
Isn't SCSI for RAID? I don't want to RAID, only want it to recognize as SATA.
Also, I read in this forum that you can download the SB driver seperate from the RAID driver at the ATI website. Would it be different if I reformatted and only use the SB driver from ATI website?
Thanks for your help. I love the GIGABYTE board and just want to set it correctly.
Rick
BIOS: Award Software International, Inc. F4, 12/31/2008
CPU: AMD Athlon X2 4850e
Memory: G.SKILL F2-8500CL5D-4GBPK (DDR2 1066)
HDD: WD Caviar SE16 WD3200AAKS
Optical Drive: Samsung SH-S223Q
Power Supply: Rosewill RD500-2DB
Operating System: WinXP Pro SP3
I have one SATA hard drive connected to SATAll0 on the motherboard. I am not going to use RAID. Why is my hard drive displaying as SCSI in Windows XP Device Manager, even though I loaded the SATA driver from floppy during the OS install on the new HDD?
These are the settings I chose for install:
When I created the Driver Diskette from the GIGABYTE installation drivers disk for Windows XP Pro, I chose number 5 from the following options:
1)GIGABYTE SATA-RAID Driver(x86)
2)GIGABYTE SATA-RAID Driver(x64)
3)SB600 SATA
4)SB600 SATA(Vista)
5)SB700/750 SATA
0)exit
These are my SATA settings from the BIOS Integrated Peripherals:
OnChip SATA Controller [Enabled]
OnChip SATA Type [AHCI]
OnChip SATA Port4/5 [IDE]
Isn't SCSI for RAID? I don't want to RAID, only want it to recognize as SATA.
Also, I read in this forum that you can download the SB driver seperate from the RAID driver at the ATI website. Would it be different if I reformatted and only use the SB driver from ATI website?
Thanks for your help. I love the GIGABYTE board and just want to set it correctly.
Rick
Comment