Tweet
Giagbyte GA X48T DQ6 / Q6600 / GEIL 1333 value DDR3
Hello just got this board and realy impressed so I thought I would post for ego and others .
These are play settings not benching settings
Q6600 stepping B revision GO @ 3.2GHz 7x458MHz 1832MHz FSB
1.4375V (1.424V actual)
GEIL Value 1333MHz 1.7V 7-7-7-25 @ 1221MHz 5-5-5-15 1.75V
Multi/Strap is at 2.66D giving about 9.6GB/s (wow) most I've managed
so far is 9.95GB/s but I'm loathe to use maximum volts even for a quick
test as you are best to leave a little in hand , if a boardstarts to break
down it gives you time to get the next one in etc .
"EXTREME PERFORMANCE" ~ setting
FSB ~ +0.15
(G)MCH Northbridge ~ +0.2
Nvidia 9800GT @ 10% overclock ~ 660/1650/990MHz
425Watt (490Watt peak) V2.2 Active PFC Hiper PSU (please spare me your comments on this)
And thats about it
I've only had it 2 days so I will probably finnesse
these settings a little .
As an example in Doom 3 using Ultra settings and maximum everthing I was getting about 91FPS @ 1360 x 768 (the most my 37" LCD will handle)
now I'm getting over 130FPS
in Timedemo demo1 . (I may have the resolutions wrong its hard to tell in doom but its the same settings as I haven't reinstalled the operating system from the Asrock P35 
board I was using ! In Stalker it was round about 40 FPS , Little more on average
and yo yoing up and down like it does . Average is now about 85FPS and ton plus is a common norm .
Dammed if I know where this performance is coming from , but yeahaa .
I must go and kill myself now
as there is nothing left to experience .
Cyas on the darkside
These are play settings not benching settings
Q6600 stepping B revision GO @ 3.2GHz 7x458MHz 1832MHz FSB
1.4375V (1.424V actual)
GEIL Value 1333MHz 1.7V 7-7-7-25 @ 1221MHz 5-5-5-15 1.75V
Multi/Strap is at 2.66D giving about 9.6GB/s (wow) most I've managed
so far is 9.95GB/s but I'm loathe to use maximum volts even for a quick
test as you are best to leave a little in hand , if a boardstarts to break
down it gives you time to get the next one in etc .
"EXTREME PERFORMANCE" ~ setting
FSB ~ +0.15
(G)MCH Northbridge ~ +0.2
Nvidia 9800GT @ 10% overclock ~ 660/1650/990MHz
425Watt (490Watt peak) V2.2 Active PFC Hiper PSU (please spare me your comments on this)
And thats about it
I've only had it 2 days so I will probably finnessethese settings a little .
As an example in Doom 3 using Ultra settings and maximum everthing I was getting about 91FPS @ 1360 x 768 (the most my 37" LCD will handle)
now I'm getting over 130FPS
in Timedemo demo1 . (I may have the resolutions wrong its hard to tell in doom but its the same settings as I haven't reinstalled the operating system from the Asrock P35 board I was using ! In Stalker it was round about 40 FPS , Little more on averageand yo yoing up and down like it does . Average is now about 85FPS and ton plus is a common norm .
Dammed if I know where this performance is coming from , but yeahaa .
I must go and kill myself now
as there is nothing left to experience .Cyas on the darkside
(hey you got to get up for coffee now and again)
Comment