x48-T-DQ6 8GB RAM 1333

[jug]

Compis Hi I have a problem, if I can have take a hand and I've read a lot in your forums but I did not error
Motherboard Gigabyte X48T-DQ6
Memory Kingston 4 x 2 gb 1333
Processor Q9650 X 8.5
Taking overclock with only two modules (4 gb) is stable at 3.4 without touching anything else, the lactations are 6-6-6-12, however if two large modules (8gb) do not overclock it gets its roots, work under Windows Vista 64 bits.

Thank you for your contributions and greetings

CPU Clock Ratio ____________ [8]
CPU Host Clock Control_ [Enabled]
CPU Host Frequency (MHz)__________ [400]
PCI Express Frequency (Mhz)_______ [100]
CIA 2__________________________ [Disabled]
System Memory Multiplier (SPD)____ [Auto
DRAM Timing Selectable_______ SPD __ [Manual
Calendario de DRAM Selectable DOCUP [Manual]
Performance Enhance = [Standard]*********Standard Timing Control***********xCAS Latency Time - 6
xDRAM RAS# tPrecharge - 6
xDRAM RAS # tPrecharge - 6
xPrecharge Delay (tRAS) - 24
********Advanced Timing Control********* ******** ********* Avanzada Calendario de control
ACTO Xact a Plazo (tRRD) - 4
5 Escriba a xRank Leer Retraso - 5
xWrite de precarga de retardo - 10
ACTO xRefresh a Plazo - 74
xRead de precarga de retardo - 5
Valor xStatic de rodadura - 7
Fase de Ajuste xStatic de rodadura - AUTO
********System Voltage Optimized******** PCI-E Sobrevoltaje Control - NORMAL
FSB Sobrevoltaje Control - NORMAL
(G)MCH Overvoltage Control - NORMAL
maternoinfantil Sobrevoltaje - NORMAL
Loadline Calibration - AUTOCPU Voltage Control - 1.4000... CPU Voltage Control - 1,4500 ...

[Lsdmeasap]