Hi All,
I've just managed to OC my Q6600 to 3.6G with the following setting:
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ................[Auto]
CPU Clock Ratio ........................[ 9 X]
CPU Frequency ..........................3.60GHz( 400x9)
********** Clock Chip Control **********
>>>>> Standard Clock Control
CPU Host Clock Control..................[Enabled]
CPU Host Frequency (Mhz) ...............[ 400]
PCI Express Frequency (Mhz) ............[100]
C.I.A.2 ......................................[Disabled]
>>>>> Advanced Clock Control
> Advanced Clock Control [Press Enter]
CPU Clock Drive...........................[ 800mV]
PCI Express Clock Drive.................[ 900mV]
CPU Clock Skew (ps).....................[ 150ps]
MCH Clock Skew (ps)....................[ 250ps]
******** DRAM Performance Control ********
Performance Enhance......................[Standard]
Extreme Memory Profile (X.M.P.).........[Disabled]
(G)MCH Frequency Latch..................[Auto]
System Memory Multiplier .................[3.33D]
Memory Frequency (Mhz) ................. 1333
DRAM Timing Selectable .................[Manual]
>>>>> Standard Timing Control
CAS Latency Time........................[7]
tRCD ........................................[7]
tRP ..........................................[7]
tRAS.........................................[20]
>>>>> Advanced Timing Control
> Advanced Timing Control
tRRD........................................[AUTO]
tWTR......................................[AUTO]
tWR........................................[AUTO]
tRFC.......................................[AUTO]
tRTP.......................................[AUTO]
Command Rate (CMD) ................[AUTO]
Channel A Timing Settings
Static tRead Value.........................[AUTO]
tRD Phase0 Adjustment...................[AUTO]
tRD Phase1 Adjustment...................[AUTO]
tRD Phase2 Adjustment ..................[AUTO]
tRD Phase3 Adjustment...................[AUTO]
Trd2rd(Different Rank)....................[AUTO]
Twr2wr(Different Rank)...................[AUTO]
Twr2rd(Different Rank)...................[AUTO]
Trd2wr(Same/Diff Rank)..................[AUTO]
<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
Channel B Timing Settings
Static tRead Value.........................[AUTO]
tRD Phase0 Adjustment...................[AUTO]
tRD Phase1 Adjustment...................[AUTO]
tRD Phase2 Adjustment ..................[AUTO]
tRD Phase3 Adjustment...................[AUTO]
Trd2rd(Different Rank)....................[AUTO]
Twr2wr(Different Rank)...................[AUTO]
Twr2rd(Different Rank)....................[AUTO]
Trd2wr(Same/Diff Rank)..................[AUTO]<o:p></o:p>
**** Mother Board Voltage Control ****
Voltage Types Normal Current
>>> CPU
CPU Vcore.....................1.325V.......[1.50000V]
CPU Termination.............1.200V..........[1.300V]
CPU PLL........................1.500V..........[1.500V]
>>> MCH/ICH
MCH Core......................1.100V..........[1.400V]
MCH Reference...............0.760V..........[Auto]
ICH I/O.........................1.500V..........[1.500V]
>>> DRAM
DRAM Voltage................1.500V..........[1.7V]
DRAM Termination...........0.900V..........[Auto]
Advanced Settings
CPU Multi-Threading..........................[Enabled]
Limit CPUID Max. to 3........................[Disabled]
No-Execute Memory Protect...............[Enabled]
CPU Enhanced Halt (C1E)..................[Disabled]
CPU Thermal Monitor 2(TM2) .............[Disabled]
CPU EIST Function...........................[Disabled]
Virtualization Technology..................[Enabled]
Integrated Peripherals
Legacy USB Storage Detect ..............[Enabled]<o:p></o:p>
I was wondering what improvements could be made to these settings at the current OC ?
The Idle temps for the CPU are 47, 44, 42 and 45.
Best regards,
Cosmos S.
I've just managed to OC my Q6600 to 3.6G with the following setting:
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ................[Auto]
CPU Clock Ratio ........................[ 9 X]
CPU Frequency ..........................3.60GHz( 400x9)
********** Clock Chip Control **********
>>>>> Standard Clock Control
CPU Host Clock Control..................[Enabled]
CPU Host Frequency (Mhz) ...............[ 400]
PCI Express Frequency (Mhz) ............[100]
C.I.A.2 ......................................[Disabled]
>>>>> Advanced Clock Control
> Advanced Clock Control [Press Enter]
CPU Clock Drive...........................[ 800mV]
PCI Express Clock Drive.................[ 900mV]
CPU Clock Skew (ps).....................[ 150ps]
MCH Clock Skew (ps)....................[ 250ps]
******** DRAM Performance Control ********
Performance Enhance......................[Standard]
Extreme Memory Profile (X.M.P.).........[Disabled]
(G)MCH Frequency Latch..................[Auto]
System Memory Multiplier .................[3.33D]
Memory Frequency (Mhz) ................. 1333
DRAM Timing Selectable .................[Manual]
>>>>> Standard Timing Control
CAS Latency Time........................[7]
tRCD ........................................[7]
tRP ..........................................[7]
tRAS.........................................[20]
>>>>> Advanced Timing Control
> Advanced Timing Control
tRRD........................................[AUTO]
tWTR......................................[AUTO]
tWR........................................[AUTO]
tRFC.......................................[AUTO]
tRTP.......................................[AUTO]
Command Rate (CMD) ................[AUTO]
Channel A Timing Settings
Static tRead Value.........................[AUTO]
tRD Phase0 Adjustment...................[AUTO]
tRD Phase1 Adjustment...................[AUTO]
tRD Phase2 Adjustment ..................[AUTO]
tRD Phase3 Adjustment...................[AUTO]
Trd2rd(Different Rank)....................[AUTO]
Twr2wr(Different Rank)...................[AUTO]
Twr2rd(Different Rank)...................[AUTO]
Trd2wr(Same/Diff Rank)..................[AUTO]
<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
Channel B Timing Settings
Static tRead Value.........................[AUTO]
tRD Phase0 Adjustment...................[AUTO]
tRD Phase1 Adjustment...................[AUTO]
tRD Phase2 Adjustment ..................[AUTO]
tRD Phase3 Adjustment...................[AUTO]
Trd2rd(Different Rank)....................[AUTO]
Twr2wr(Different Rank)...................[AUTO]
Twr2rd(Different Rank)....................[AUTO]
Trd2wr(Same/Diff Rank)..................[AUTO]<o:p></o:p>
**** Mother Board Voltage Control ****
Voltage Types Normal Current
>>> CPU
CPU Vcore.....................1.325V.......[1.50000V]
CPU Termination.............1.200V..........[1.300V]
CPU PLL........................1.500V..........[1.500V]
>>> MCH/ICH
MCH Core......................1.100V..........[1.400V]
MCH Reference...............0.760V..........[Auto]
ICH I/O.........................1.500V..........[1.500V]
>>> DRAM
DRAM Voltage................1.500V..........[1.7V]
DRAM Termination...........0.900V..........[Auto]
Advanced Settings
CPU Multi-Threading..........................[Enabled]
Limit CPUID Max. to 3........................[Disabled]
No-Execute Memory Protect...............[Enabled]
CPU Enhanced Halt (C1E)..................[Disabled]
CPU Thermal Monitor 2(TM2) .............[Disabled]
CPU EIST Function...........................[Disabled]
Virtualization Technology..................[Enabled]
Integrated Peripherals
Legacy USB Storage Detect ..............[Enabled]<o:p></o:p>
I was wondering what improvements could be made to these settings at the current OC ?
The Idle temps for the CPU are 47, 44, 42 and 45.
Best regards,
Cosmos S.
Comment