Guys,
I need your help here. I am quite happy running my rig @ 3.4GHz and may the odd time want to go beyond. I just want to make sure Im doing the right thing (being new to whole OC'ing). Here's my spec:
EP45-UD3P
Q9550 (C1)
2x2GB Transcend AxeRAM 1066+ (mini review)
Gigabyte 9800 GTX+ 1GB
Corsair 750TW
Zalman CNPS9700 NT CPU COOLER
3 x Case fans
I copied the Bios from someone elses post and added my values. I wish I knew how to export the bios into a txt file so I could just copy and paste my settings here. Ive added "<" to show you where I made changes, otherwise it is default/auto.
I need help with CPU VCORE, MCH, DRAM settings etc.... sorry! & Please! I would really appreciate it as I know the settings could be alot more tidy than this. CHEERS!
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: [AUTO]
CPU Clock Ratio ..........................: [8 X]
Fine CPU Clock Ratio.....................: [+0.5]<
CPU Frequency ...........................: 3.40GHz[400x8.5]
Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [ENABLED]<
CPU Host Frequency (Mhz) ............: [400 Mhz]<
PCI Express Frequency (Mhz) .........: [100]<
C.I.A.2 .................................:[DISABLED]
Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: [800mV]<
PCI Express Clock Drive.................: [900mV]<
CPU Clock Skew (ps)....................: [0ps]
MCH Clock Skew (ps)...................: [0ps]
DRAM Performance Control
Performance Enhance...................: [STANDARD]<
Extreme Memory Profile (X.M.P.).....: [N/A]
(G)MCH Frequency Latch...............: [400]<
System Memory Multiplier ..............: [2.66D]<
Memory Frequency (Mhz) ..............: [1066]
DRAM Timing Selectable ................: [MANUAL]<
Standard Timing Control
CAS Latency Time........................: 5<
tRCD .........................................: 5<
tRP'...........................................: 5<
tRAS..........................................: 15<
Advanced Timing Control
tRRD...........................................: 4 [AUTO]
tWTR..........................................: 4 [AUTO]
tWR............................................: 8 [AUTO]
tRFC...........................................: 68 [AUTO]
tRTP...........................................: 4 [AUTO]
Command Rate (CMD) ....................: : 0 [AUTO]
Driving Strength Profiles
Driving Strength ............................: [AUTO]
Channel A
Static tRead Value.........................: 10 [8]<
REST SET TO AUTO
Channel B
Static tRead Value.........................: 10 [8]
REST SET TO AUTO[/B]
[B]
I need your help here. I am quite happy running my rig @ 3.4GHz and may the odd time want to go beyond. I just want to make sure Im doing the right thing (being new to whole OC'ing). Here's my spec:
EP45-UD3P
Q9550 (C1)
2x2GB Transcend AxeRAM 1066+ (mini review)
Gigabyte 9800 GTX+ 1GB
Corsair 750TW
Zalman CNPS9700 NT CPU COOLER
3 x Case fans
I copied the Bios from someone elses post and added my values. I wish I knew how to export the bios into a txt file so I could just copy and paste my settings here. Ive added "<" to show you where I made changes, otherwise it is default/auto.
I need help with CPU VCORE, MCH, DRAM settings etc.... sorry! & Please! I would really appreciate it as I know the settings could be alot more tidy than this. CHEERS!
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: [AUTO]
CPU Clock Ratio ..........................: [8 X]
Fine CPU Clock Ratio.....................: [+0.5]<
CPU Frequency ...........................: 3.40GHz[400x8.5]
Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [ENABLED]<
CPU Host Frequency (Mhz) ............: [400 Mhz]<
PCI Express Frequency (Mhz) .........: [100]<
C.I.A.2 .................................:[DISABLED]
Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: [800mV]<
PCI Express Clock Drive.................: [900mV]<
CPU Clock Skew (ps)....................: [0ps]
MCH Clock Skew (ps)...................: [0ps]
DRAM Performance Control
Performance Enhance...................: [STANDARD]<
Extreme Memory Profile (X.M.P.).....: [N/A]
(G)MCH Frequency Latch...............: [400]<
System Memory Multiplier ..............: [2.66D]<
Memory Frequency (Mhz) ..............: [1066]
DRAM Timing Selectable ................: [MANUAL]<
Standard Timing Control
CAS Latency Time........................: 5<
tRCD .........................................: 5<
tRP'...........................................: 5<
tRAS..........................................: 15<
Advanced Timing Control
tRRD...........................................: 4 [AUTO]
tWTR..........................................: 4 [AUTO]
tWR............................................: 8 [AUTO]
tRFC...........................................: 68 [AUTO]
tRTP...........................................: 4 [AUTO]
Command Rate (CMD) ....................: : 0 [AUTO]
Driving Strength Profiles
Driving Strength ............................: [AUTO]
Channel A
Static tRead Value.........................: 10 [8]<
REST SET TO AUTO
Channel B
Static tRead Value.........................: 10 [8]
REST SET TO AUTO[/B]
[B]
Comment