Hello, I just built a new system, which was my first build. I am running 2 sticks of 2 GB 996599 in dual channel mode. In bios for Memory Frequency the reading 1066-890. Is this normal? or shouldn't they both read 1066?
Settings in DRAM Performance Control are
Performance Enhance [Turbo]
Extreme Memory Profile [Auto]
MCH Frequency Latch [Auto]
System Multiplier [2.00D]
Memory Frequency 1066 890
Dram Timing Selectable [Auto]
Cas Latency Time 5 [Auto]
tRCD 5 [Auto]
tRP 5 [Auto]
tRAS 15 [Auto]
DRAM Voltage 1.800V [Auto]
DRAM Termination 0.900 [Auto]
Channel A Ref 0.900 [Auto]
Channel B Ref 0.900 [Auto]
Thanks for any help.
Settings in DRAM Performance Control are
Performance Enhance [Turbo]
Extreme Memory Profile [Auto]
MCH Frequency Latch [Auto]
System Multiplier [2.00D]
Memory Frequency 1066 890
Dram Timing Selectable [Auto]
Cas Latency Time 5 [Auto]
tRCD 5 [Auto]
tRP 5 [Auto]
tRAS 15 [Auto]
DRAM Voltage 1.800V [Auto]
DRAM Termination 0.900 [Auto]
Channel A Ref 0.900 [Auto]
Channel B Ref 0.900 [Auto]
Thanks for any help.
Comment