Just posting this in case it helps anybody out there with a similar configuration. This represents a 20% overclock on stock voltages for the E8400 E0 stepping. Full credit goes to LSD for the original template, I just made it a tad easier to read (I'm anal like that ). Perhaps it will help some noobs like I still am
E8400 E0 Stepping
EP45-UD3R Motherboard
G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500)
Newegg.com - G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory - Desktop Memory
E8400 E0 Stepping
EP45-UD3R Motherboard
G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500)
Newegg.com - G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory - Desktop Memory
Code:
Robust Graphics Booster ...............: [Auto] CPU Clock Ratio .......................: [ 9] Fine CPU Clock Ratio...................: +0.0 CPU Frequency .........................: 3.60GHz Clock Chip Control Standard Clock Control CPU Host Clock Control.................: [Enabled] CPU Host Frequency (Mhz) ..............: 401Mhz PCI Express Frequency (Mhz) ...........: 100 C.I.A.2 ...............................: [Disabled] Advanced Clock Control [Press Enter] CPU Clock Drive........................: 800mV PCI Express Clock Drive................: 900mV CPU Clock Skew (ps)....................: 0ps MCH Clock Skew (ps)....................: 0ps DRAM Performance Control Performance Enhance....................: [STANDARD] Extreme Memory Profile (X.M.P.)........: [Disabled] (G)MCH Frequency Latch.................: Auto System Memory Multiplier ..............: 2.66D Memory Frequency (Mhz) ................: 1069 DRAM Timing Selectable ................: [Manual] Standard Timing Control CAS Latency Time.......................: 5 tRCD ..................................: 5 tRP'...................................: 5 tRAS...................................: 15 Advanced Timing Control tRRD...................................: 4 tWTR...................................: 4 tWR....................................: 6 tRFC...................................: 54 tRTP...................................: 4 Command Rate (CMD) ....................: 2 Driving Strength Profiles Driving Strength ......................: 1066 Channel A Static tRead Value.....................: 7 tRD Phase0 Adjustment..................: [Auto] tRD Phase1 Adjustment..................: [Auto] tRD Phase2 Adjustment .................: [Auto] tRD Phase3 Adjustment..................: [Auto] Trd2rd(Different Rank).................: [Auto] Twr2wr(Different Rank).................: [Auto] Twr2rd(Different Rank).................: [Auto] Trd2wr(Same/Diff Rank).................: [Auto] Dimm1 Clock Skew Control...............: [Auto] Dimm2 Clock Skew Control...............: [Auto] DDR Write Training.....................: [Auto] Channel B Static tRead Value.....................: 7 tRD Phase0 Adjustment..................: [Auto] tRD Phase1 Adjustment..................: [Auto] tRD Phase2 Adjustment .................: [Auto] tRD Phase3 Adjustment..................: [Auto] Trd2rd(Different Rank).................: [Auto] Twr2wr(Different Rank).................: [Auto] Twr2rd(Different Rank).................: [Auto] Trd2wr(Same/Diff Rank).................: [Auto] Dimm1 Clock Skew Control...............: [Auto] Dimm2 Clock Skew Control...............: [Auto] DDR Write Training.....................: [Auto] Motherboard Voltage Control Voltage Type...........................: [Manual] CPU---------------------Normal-----------Current Load Line Calibration..................: [Disabled] CPU Vcore...............1.25000V.......: 1.25000V CPU Termination.........1.200V.........: 1.200V CPU PLL.................1.500V.........: 1.500V CPU Reference...........0.760V.........: [Auto] MCH/ICH MCH Core................1.100V.........: 1.200V MCH Reference...........0.760V.........: [Auto] MCH/DRAM Reference......0.900V.........: [Auto] ICH I/O.................1.500V.........: 1.500V ICH Core................1.100V.........: 1.100V DRAM DRAM Voltage............1.800V.........: 2.000V DRAM Termination........0.900V.........: [Auto] Channel A Reference.....0.900V.........: [Auto] Channel B Reference.....0.900V.........: [Auto] Advanced Settings Limit CPUID Max. to 3..................: [Disabled] No-Execute Memory Protect..............: [Enabled] CPU Enhanced Halt (C1E)................: [Disabled] C2/C2E State Support...................: [Disabled] x C4/C4E State Support.................: [Disabled] CPU Thermal Monitor 2(TM2) ............: [Enabled] CPU EIST Function......................: [Disabled] Virtualization Technology..............: [Disabled] Integrated Peripherals Legacy USB Storage Detect .............: [Disabled]
Comment