If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools
Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools
Update with:
Everest Ultimate Edition 5.30.1903
* Motherboard / BIOS / BIOS settings detection on capable Asus and Intel motherboards
* preliminary sensor support for Nuvoton NCT6771F
* motherboard specific sensor info for Intel DP55KG, Intel DP55SB, Intel DP55WG
* anti-virus support for Microsoft Security Essentials
* anti-spyware software support for Microsoft Security Essentials
* improved and fixed sensor support for Sony VAIO
i7 Turbo 6.94
-better support IDA mode in the Core 2 Mobile chips
CPU-Z 1.52.4 (32-bit)
HWiNFO32 v3.21-388
* Enhanced support of ATI R8xx (Evergreen) family (clock, properties).
* Added support of Fintek F71808E sensor.
* Fixed some issues while accessing certain SMBus devices on certain motherboards.
* Improved reporting of ATI R7xx family clocks.
* Improved sensor support of Intel DP55 boards.
Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools
Updated with:
Gigabyte Smart6 B9.1006.1
Everest Ultimate Edition 5.30.1905
* improved support for new Intel Atom (aka Pineview)
* SPD memory information for Dawning A620R motherboard
* motherboard specific sensor info for Asus M4A78-E, Jetway NC94, MSI MS-7578
* ACPI fan speed measurement on Lenovo notebooks
* fixed: monitor information / vendor and model name detection
Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools
Updated with:
Everest Ultimate Edition 5.30.1906
* preliminary GPU information for ATI Radeon HD 5750 (Juniper)
* preliminary GPU information for ATI Radeon HD 5770 (Juniper)
* direct GPU diode temperature measurement on nVIDIA G92, G94
Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools
Updated with:
RealTemp 3.35
Lots of minor changes behind the scenes including better support for Intel's new socket 1156 CPUs as well as their new Core i7 mobile CPUs.
Changes include:
-the use of the i7 Turbo method to calculate the multiplier for all CPUs. If this causes a problem for older Core 2 CPUs that may have the internal timers disabled then you will need to add this line to the RealTemp.INI file to use the previous method:
MSRMulti=1
The new i7 Turbo based method when used on a modern Core i7 or i5 CPU with C3/C6 enabled in the bios will be able to show you the multiplier of the hardest working core which in my opinion and Intel's opinion, best represents how fast your CPU is actually working. This method also works well with Core 2 mobile CPUs that support Intel Dynamic Acceleration (IDA).
The i7 Turbo method allows Super Low Frequency Mode (SLFM) to be displayed correctly on the Core 2 mobile processors that support this feature. A multiplier of 3.0 at idle when this feature is enabled is typical.
-the elapsed timer has been fixed so it shouldn't lose time any more.
-a work around for an incorrect bios setting was found for the missing core issues that sometimes plagued Quad core owners.
-a Task Manager based load meter (TM Load) was added as an option. The original load meter is based on the percentage of time a CPU is in the C0 state which is very accurate for many CPUs. Mobile CPUs work completely different and this number does not accurately reflect the load of the CPU at idle so now you have an option.
-the XS Benchmark was changed slightly so now you can Cancel it while it is running and you shouldn't see any more, "Program isn't responding" messages when it is fully loaded testing.
-an option to display your temperatures in Fahrenheit was added. Just add this to your RealTemp.INI file.
Fahrenheit=1
-the Settings window has been reworked for better consistency in preparation for possible future upgrades.
-only maximum VID is displayed in the Settings window for Core 2 owners for less confusion. This option will display real time VID on the main screen.
-an option to Disable Turbo Mode on Core i5/i7 CPUs.
Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools
Updated with:
Everest Ultimate Edition 5.30.1909
* Preferences / Hardware Monitoring / new option: clock speed decimal digits
* Motherboard / ACPI / extended RSDP, RSDT, XSDT table details
* Embedded Controller register access now in kernel driver
* detection of ATI Radeon HD 4670 AGP (RV730) video chip
* GPU information for ATI Radeon HD 4670 AGP (RV730)
* direct GPU diode temperature measurement on EVGA 8800GT
* sensor support for Dell SMI of Vostro 320
* motherboard specific sensor info for Acer EG43M
* fixed: Motherboard / ACPI / XSDT table detection under Windows 7
* fixed: monitor information / vendor and model name detection
* fixed: sensor support for Fintek F71869 sensor chip
- Modify sequence of handling Smart Command to avoid unexpected request completion.
- Modify to re-enumerate connected devices in thread after resume from sleep if no device is connected before sleep.
To reduce resume time needed if no device is connected.
- Implement supporting for 2363 PATA Controller at function 1.
- Modify sequence of handling PATA - ATAPI command 0x46 to avoid compatibility issue of some PATA Optical Devices.
- Modify sequence of handling PATA - ATAPI command 0x5A to avoid compatibility issue of some PATA Optical Devices.
Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools
Updated with:
Everest Ultimate Edition 5.30.1911
fixed: motherboard specific sensor info for EVGA E65x, E75x, E76x
RealTemp 3.36
The only change was that the elapsed timer that I just improved for better accuracy was counting while in stand by mode which I didn't like so I fixed it. The RealTemp elapsed timer should only count up while the computer is running.
Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools
Updated with:
GPU-Z 0.3.6
* Added Infotips, they can be turned off in the system menu
* Added preliminary support for ATI Radeon HD 5900 (Hemlock), HD 5600 (Cedar), HD 5300 (Redwood)
* Added full support for HD 5850, HD 5770, HD 5750
* GPU-Z no longer crashes on ATI ULPS enabled CrossFire configurations
* Fillrate Pixel, Fillrate Texel, Memory Bandwidth will now correctly recalculate when clocks change
* Bus Interface, ATI shader count is now periodically refreshed
* Added support for HD 5850 voltages
* Second voltage on HD 5870 correctly named VDDCI
* ATI clock reading code fixed
* Fixed default clock reading on HD 5850
* Added Mutex to avoid collisions on long I2C operations
* Added basic detection for a lot of NVIDIA card fakes
* Added detection for ATI FireGL V7600, M92, RS880
* Added detection for NVIDIA GT 130, 9600 GE, Tesla C1060, G 220, GT 220, NVS 3100, GTS 160 M, NVS 160M, NVS 150M, G105M, GT 240M, G105M, G210M, G310M, ION LE
* Fixed die size and transistor count on G72 M
Everest Ultimate Edition 5.30.1913
* anti-virus software support for AVG v9
* firewall software support for AVG v9
* Hardware Monitoring / new item: PWM fan
* GPU information for ATI Radeon HD 59xx (Hemlock)
* HD Audio codec information for ATI Juniper
* motherboard specific sensor info for DFI LANParty DK P55-T3eH9
* fixed: lockup on nVIDIA GT216, GT218 (while enumerating video BIOS properties)
* fixed: GPU information for ATI Radeon HD 5750 (Juniper)
* fixed: GPU information for ATI Radeon HD 5770 (Juniper)
* fixed: GPU information for ATI Radeon HD 5850 (Cypress)
* fixed: GPU information for nVIDIA GT216, GT218
* fixed: HD Audio codec information for nVIDIA GT216, GT218
* fixed: GPU temperature compensation on nVIDIA G84, G86, G9x, GT200
* fixed: GPU fan RPM measurement on ATI Radeon HD 5xxx
* fixed: SPD information for NG modules with bad CRC
* fixed: DES support for Gigabyte G41M-ES2H, G41M-ES2L
RealTemp 3.37
-Fixed VID reporting on the 45nm mobile CPUs.
Gigabyte Smart6 B9.1014.1
MemTest 4.0
New in version 4.0: The MemTest Deluxe bootable CD now supports 32-bit and 64-bit CPUs.
Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools
Updated with:
RealTemp 3.38
From developer:
I made some progress on updating RealTemp tonight to support the new Gulftown CPUs.
Internally they seemed to be organized as 2 x 3 core CPUs. If you download the above version of RealTemp and copy it into two different folders then you can go into the first folder and edit the RealTemp.ini file.
Use this:
Skull=1
and in the other RealTemp folder you can use add this to RealTemp.ini
Skull=2
Now run two instances of RealTemp, one from each folder and each one should be able to read 3 of your 6 cores. Not a perfect solution but at least it's a start.
It will read the correct TJMax from each core and should show the correct temperature.
After I get some feedback I will look into writing a 6 core specific version of RealTemp but hopefully this will keep users happy for a week or two.
Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools
Update with:
Everest Ultimate Edition 5.30.1917
* Display / GPGPU / support for ATI Stream v2.0
* Display / GPGPU / detection of shader engine count (ATI Stream v2.0)
* Display / GPGPU / detection of 3D ProgramGrid support (ATI Stream v2.0)
* extended reference OpenGL Extensions list (for ATI Cypress, Juniper)
* extended reference OpenGL Extensions list (for nVIDIA GT216, GT218)
* USB-IDE bridges support disabled on +200 more USB memory card readers
* identification of Mobile Intel Pentium SU41xx (aka Penryn-2M)
* Intel Processor Number detection for Atom N470
* Intel Processor Number detection for Mobile Pentium SU4100
* sensor support for Dell SMI of Vostro 1015
* motherboard specific sensor info for Asus P5E WS Pro
* motherboard specific sensor info for ECS A740GM-M
* motherboard specific sensor info for ECS A785GM-M
* fixed: GPU information for nVIDIA GeForce GTS 160M (G94M)
* fixed: GPU information for nVIDIA GeForce GTS 240 (G92GTS)
* fixed: GPU information for nVIDIA GeForce GTS 250 (G92GTS)
* fixed: GPU information for nVIDIA GeForce GTX 260M (G92M)
* fixed: GPU information for nVIDIA GeForce GTX 280M (G92M)
* fixed: monitor information / horizontal freq, vertical freq, pixel clock detection
HWiNFO32 3.22.404
* Enhanced support of ATI R8xx (Evergreen) family (clock, properties).
* Added support of Fintek F71808E sensor.
* Fixed some issues while accessing certain SMBus devices on certain motherboards.
* Improved reporting of ATI R7xx family clocks.
* Improved sensor support of Intel DP55 boards.
* Added reporting of additional Lynnfield/Clarksfield capabilities.
* Added ATI FirePro M7750.
* Added reporting of Intel Extreme Tuning (XTU) capable BIOS settings.
* Enhanced sensor support of ASUS Maximus III Formula / Gene.
* Added reporting of DMI bus capabilities for CPUs with Internal QPI and External DMI (*field, *dale).
* Fixed rare problems with Intel CPU detection under specific conditions.
- Modify sequence of handling Smart Command to avoid unexpected request completion.
- Modify to re-enumerate connected devices in thread after resume from sleep if no device is connected before sleep.
To reduce resume time needed if no device is connected.
- Implement supporting for 2363 PATA Controller at function 1.
- Modify sequence of handling PATA - ATAPI command 0x46 to avoid compatibility issue of some PATA Optical Devices.
- Modify sequence of handling PATA - ATAPI command 0x5A to avoid compatibility issue of some PATA Optical Devices.
Re: Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools
Updated with:
MemSet 4.1 Beta 6
Smart TPM B9.1012.1
XHD (eXtreme HardDrive) B9.1007.1
Dynamic Energy Saver™ 2 B9.0904.1
SIW 2009.10.22
* Windows 7 Compatible
* PortableApps Version
* DirectX detection on Win7
* Correct Splash Screen size if DPI != 96
* Scheduled Tasks for Vista and Windows 7
* Tools --> Hibernate Enable/Disable for Windows 7
* Fixed: CPU and Memory Usage
* Fixed: Installation Time
* Fixed: Wrong menu
* Fixed: Exception c0000096 when Sony Vegas 7 is installed on Vista 32
* Fixed: Empty messages in Event Viewer
* Minor improvements and bug fixes.
Comment