Announcement

Collapse
No announcement yet.

G Skill Black PI 6400 above 1000mhz settings?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    G Skill Black PI 6400 above 1000mhz settings?

    Im just wondering has anyone got memory timings/voltage settings to run
    800mhz gskill above 1015 Mhz on GA-EP45-UD3 boards?.
    1015 (fsb 507)5-5-5-15 at 2.16 v is about the best I can get now.
    Do they work higher at cas 6 timings?
    Last edited by kick; 02-10-2009, 02:12 PM.
    Current Systems:

    Asrock p67 Extreme6.............. Gigabyte EP-45 UD3 ...................... Gigabyte 73 PVM S2
    Intel i5 2500k 4.8ghz................ Intel Q8400 3.8ghz......................... Intel D820 2.8ghz
    Zalman 10x cooler.................... Coolermaster V8............................ HP cooler
    8GB Gskill ripjaw ddr3.............. 4GB Gskill PI ddr2.......................... 4GB samsung ddr2
    60GB ssd/500GB HDD .............. WD 1TB hdd.................................... Seagate 160GB hdd
    GTX 460 1GB x2 SLI ................. Msi 9600GT 512MB(died) ........... Onboard gx
    Win7 64 ,750w psu(ocz)............ Win7 64 ,520w psu,seasonic...... Win XP pro ,400w psu

    HEC 6A34 case . ....................... Jeantec R2 case............................ Packard Bell case

    hoping to upgrade to http://www.thinkgeek.com/stuff/41/habicase.shtml
    http://www.flixya.com/video/140325/Animal-launching
    Tags: None
  • #2
    Re: G Skill Black PI 6400 above 1000mhz settings?

    You have to try whether they'll work, it depends on which chips are used on the modules. 5-6-6-18 might help, but higher timings shouldn't make much of a difference, but you can give it a try at 7-7-7-18 if you want to.

    Comment

    • #3
      Re: G Skill Black PI 6400 above 1000mhz settings?

      thx for reply but
      Im just interested in anyone who may have figures for the same mem at higher speeds on 45-ud3 boards ,But hey q8200 is starting to get very hot on air at 3.55g + anyway so its as good as it will get it seems.
      Current Systems:

      Asrock p67 Extreme6.............. Gigabyte EP-45 UD3 ...................... Gigabyte 73 PVM S2
      Intel i5 2500k 4.8ghz................ Intel Q8400 3.8ghz......................... Intel D820 2.8ghz
      Zalman 10x cooler.................... Coolermaster V8............................ HP cooler
      8GB Gskill ripjaw ddr3.............. 4GB Gskill PI ddr2.......................... 4GB samsung ddr2
      60GB ssd/500GB HDD .............. WD 1TB hdd.................................... Seagate 160GB hdd
      GTX 460 1GB x2 SLI ................. Msi 9600GT 512MB(died) ........... Onboard gx
      Win7 64 ,750w psu(ocz)............ Win7 64 ,520w psu,seasonic...... Win XP pro ,400w psu

      HEC 6A34 case . ....................... Jeantec R2 case............................ Packard Bell case

      hoping to upgrade to http://www.thinkgeek.com/stuff/41/habicase.shtml
      http://www.flixya.com/video/140325/Animal-launching

      Comment

      • #4
        Re: G Skill Black PI 6400 above 1000mhz settings?

        I'd check out the offcial GSKill forums (if they have any) and the general RAM forum here, you're more likely to find someone using them there.

        Comment

        Previous template Next
        Working...
        X