GA-EP45-UD3P (rev1.1) 16GB (4x4GB) problems

[pfak]

Hello,

I am trying to run 4x4GB sticks of DDR2-800 (OCZ "P45 Special") on a Gigabyte GA-EP45-UD3P board. I have set the timings manually (5-6-6-18) and the voltage to 1.8V.

The problem is, when I do memtest86+ for an extended period of time (2 or 3 passes) I start getting errors. The errors are never at a constant address range and bounce around.

I have tried running the sticks in pairs of 2 (2x4GB) and they run through memtest86+ fine without any errors.

Anyone have any suggestions?

Thank you.

[powergiga]

Re: GA-EP45-UD3P (rev1.1) 16GB (4x4GB) problems

[quote=pfak;282218]Hello,

I am trying to run 4x4GB sticks of DDR2-800 (OCZ "P45 Special") on a Gigabyte GA-EP45-UD3P board. I have set the timings manually (5-6-6-18) and the voltage to 1.8V.

The problem is, when I do memtest86+ for an extended period of time (2 or 3 passes) I start getting errors. The errors are never at a constant address range and bounce around.

I have tried running the sticks in pairs of 2 (2x4GB) and they run through memtest86+ fine without any errors.

Anyone have any suggestions?

You are in same problem link at http://forums.tweaktown.com/f69/ga-e...6gb-ram-30080/

pg