"Funny" problem with Q6600 on GA-P35-S3G

[egalus]

[egalus]

Re: "Funny" problem with Q6600 on GA-P35-S3G

Ok,
I did some more testing. First I upgraded the bios from 5a to the last beta 5b and disabled C1E (Eist still enabled), than I set everything to spec values regarding cpu,ram,pcie...

Reran the test and boom, same "fall-back to 6x" problem again.

By accident I found something new, when changing the displayed core in cpu-z from core#0 to core#2 the multi goes up from 6x to 9x.
Checking this further it seems that core#0 and #1 run at 6x, core#2 and #3 run at 9x.

To rule out that just cpu-z has wrong reading on multi for the first of the two dualcores I let the test run for some time and already at Test4 the #0 and #1 are one test behind #2 and #3, which indicates that the multi reading is right.

Now I am really puzzled.

[egalus]