Announcement
Collapse
No announcement yet.
Unable to OC UD3P and Q6600
Collapse
X
-
Re: Unable to OC UD3P and Q6600
Goto user CP and enter your hardware into your signature so like flyfisher said, we know what your working with.__________________
GA-P67A-UD4-B3(v1.1) - F4 BIOS
Intel Core i5-2500K - Corsair H50 p/p
Mushkin Blackline DDR3-1600 @ 9-9-9-24 1.35v
OCZ Vertex 2 60GB 34nm SSD - Maxtor 320GB
Gigabyte GTX 460 SuperOverclock 1GB
Corsair TX650W PSU
Windows 7 HP 64-bit - SP1
Antec 300 Case - Maxed out fans
"The files are IN the computer ... It's SO SIMPLE!"
Comment
-
Re: Unable to OC UD3P and Q6600
What kind of cooling are you using?__________________
GA-P67A-UD4-B3(v1.1) - F4 BIOS
Intel Core i5-2500K - Corsair H50 p/p
Mushkin Blackline DDR3-1600 @ 9-9-9-24 1.35v
OCZ Vertex 2 60GB 34nm SSD - Maxtor 320GB
Gigabyte GTX 460 SuperOverclock 1GB
Corsair TX650W PSU
Windows 7 HP 64-bit - SP1
Antec 300 Case - Maxed out fans
"The files are IN the computer ... It's SO SIMPLE!"
Comment
-
Re: Unable to OC UD3P and Q6600
I wouldn't attempt to do any OC until you get aftermarket cooling on that quad-core. What temps are you seeing?__________________
GA-P67A-UD4-B3(v1.1) - F4 BIOS
Intel Core i5-2500K - Corsair H50 p/p
Mushkin Blackline DDR3-1600 @ 9-9-9-24 1.35v
OCZ Vertex 2 60GB 34nm SSD - Maxtor 320GB
Gigabyte GTX 460 SuperOverclock 1GB
Corsair TX650W PSU
Windows 7 HP 64-bit - SP1
Antec 300 Case - Maxed out fans
"The files are IN the computer ... It's SO SIMPLE!"
Comment
-
Re: Unable to OC UD3P and Q6600
30-35 idle and 45-50 during games. From what i've been reading, people have been able to OC to 3.0 little or no change to their voltage. However, i set my to 1.325 V and under CPUZ its only showing it as 1.280 V
Comment
-
Re: Unable to OC UD3P and Q6600
That voltage discrepancy in CPUz is afaik normal. Just because someone else was able to OC to 3GHz without a volt increase doesn't mean your going to be able to, every chip is different - as evidenced by your inability to get that clock.
So its working at stock 2.4. WHich settings are you using to attempt 3.0? Have you tried slowly upping the FSB from stock to see if you have a "wall" somewhere?Last edited by SeanDude05; 01-19-2009, 06:58 PM.__________________
GA-P67A-UD4-B3(v1.1) - F4 BIOS
Intel Core i5-2500K - Corsair H50 p/p
Mushkin Blackline DDR3-1600 @ 9-9-9-24 1.35v
OCZ Vertex 2 60GB 34nm SSD - Maxtor 320GB
Gigabyte GTX 460 SuperOverclock 1GB
Corsair TX650W PSU
Windows 7 HP 64-bit - SP1
Antec 300 Case - Maxed out fans
"The files are IN the computer ... It's SO SIMPLE!"
Comment
-
Re: Unable to OC UD3P and Q6600
Originally posted by SeanDude05 View PostThat voltage discrepancy in CPUz is afaik normal. Just because someone else was able to OC to 3GHz without a volt increase doesn't mean your going to be able to, every chip is different - as evidenced by your inability to get that clock.
So its working at stock 2.4. WHich settings are you using to attempt 3.0? Have you tried slowly upping the FSB from stock to see if you have a "wall" somewhere?
Comment
-
Re: Unable to OC UD3P and Q6600
Try Loading optimized defaults, and saving and exiting and re-enter the bios to try and OC again. Have you tried another BIOS version?__________________
GA-P67A-UD4-B3(v1.1) - F4 BIOS
Intel Core i5-2500K - Corsair H50 p/p
Mushkin Blackline DDR3-1600 @ 9-9-9-24 1.35v
OCZ Vertex 2 60GB 34nm SSD - Maxtor 320GB
Gigabyte GTX 460 SuperOverclock 1GB
Corsair TX650W PSU
Windows 7 HP 64-bit - SP1
Antec 300 Case - Maxed out fans
"The files are IN the computer ... It's SO SIMPLE!"
Comment
-
Re: Unable to OC UD3P and Q6600
Originally posted by SeanDude05 View PostTry Loading optimized defaults, and saving and exiting and re-enter the bios to try and OC again. Have you tried another BIOS version?
Comment
Comment