ep45-ud3r with ocz2rpr10662G

[gmoney]

Im having major issues with my system crashing when trying to play counter strike and other games. I have been reading alot of threads with people having the same issues in games with this set up.

I can run counter-strike on normal settings with bios set to optimal settings for around 10-20 minutes average. I have my video card running under load @ 40c.

Scenarios: a) playing counter strike until freeze then goes to blue screen stating either memory or nv4_disp
b) freezes up during counter strike play boots me out of game and shows a notice stating "nv4_disp driver has stop responding"
c) just freezes up during regular window applications.



Heres my set up:

GA-ep45-ud3r
E7300 core 2 duo
ocz2rpr10662G (sticker on side reads 5-5-5 @2.2v)
evga 9800gtx+
western digital 250gig 7200rpm
pc power & cooling 500watt silencer.
Windows xp sp3
Nvidia 180 (brand new drivers)

Optimal settings loaded :
memory reads 5-7-7-20 @ 1.8v stock

HELP!!!!!! THIS IS MY FIRST GIGABYTE BOARD.

[ADDIER]

Re: ep45-ud3r with ocz2rpr10662G

Hi you have oc in your CPU???
Show Blue screen??? or only reset??

[gmoney]

Re: ep45-ud3r with ocz2rpr10662G

No computer is not overclocked. Yes i have got the blue screen a couple times. Its either a freeze up which has happend the last two times, or i get blue screens reading memory, or statings nv4_disp stop responding and or just freezes up until i restart.

[powergiga]

Re: ep45-ud3r with ocz2rpr10662G

Im having major issues with my system crashing when trying to play counter strike and other games. I have been reading alot of threads with people having the same issues in games with this set up.

I can run counter-strike on normal settings with bios set to optimal settings for around 10-20 minutes average. I have my video card running under load @ 40c.

Scenarios: a) playing counter strike until freeze then goes to blue screen stating either memory or nv4_disp
b) freezes up during counter strike play boots me out of game and shows a notice stating "nv4_disp driver has stop responding"
c) just freezes up during regular window applications.



Heres my set up:

GA-ep45-ud3r
E7300 core 2 duo
ocz2rpr10662G (sticker on side reads 5-5-5 @2.2v)
evga 9800gtx+
western digital 250gig 7200rpm
pc power & cooling 500watt silencer.
Windows xp sp3
Nvidia 180 (brand new drivers)

Optimal settings loaded :
memory reads 5-7-7-20 @ 1.8v stock

HELP!!!!!! THIS IS MY FIRST GIGABYTE BOARD.

Try change auto to manual set from 1.8 to 2.2 in bios.

pg

[gmoney]

Re: ep45-ud3r with ocz2rpr10662G

Yes im running it on 5-5-5-18 @2.2v which is what its rated. I have also tried 5-5-5-15 @2.1-2.2v neither works in games.

[Lsdmeasap]

Re: ep45-ud3r with ocz2rpr10662G

Please post me your full settings, if you are not overclocking some Auto settings may still be wrong. Also post me a screenshot of this so I can see what Auto is giving you for some of the ram settings that may be isues >>>

http://www.tweakers.fr/download/MemSet40beta4.zip

This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

[b][u]MB Intelligent Tweaker(M.I.T.)[/u][/b]
Robust Graphics Booster ...............: 
CPU Clock Ratio ..........................: 
Fine CPU Clock Ratio.....................:.0
CPU Frequency ...........................: 


[b][u]Clock Chip Control [/u][/b]
[b][u]Standard Clock Control[/u][/b]
CPU Host Clock Control..................: [Enabled] 
CPU Host Frequency (Mhz) ............: Mhz
[B]PCI Express Frequency (Mhz) .........:Set to 100[/B]

C.I.A.2 .................................:[Disabled]


[b][u]Advanced Clock Control [Press Enter][/u][/b]
CPU Clock Drive...........................: <<< 
PCI Express Clock Drive.................: <<< 
CPU Clock Skew (ps)....................: <<< 
MCH Clock Skew (ps)...................: <<< 


[b][u]DRAM Performance Control[/u][/b][u][/u]
[B]Performance Enhance...................: [STANDARD][/B]
Extreme Memory Profile (X.M.P.).....: Disabled
(G)MCH Frequency Latch...............: [Auto]
System Memory Multiplier ..............: 
Memory Frequency (Mhz) ..............: 
DRAM Timing Selectable ................: [Manual]

[b]Standard Timing Control[/b]
CAS Latency Time........................
tRCD .........................................
tRP'...........................................
tRAS..........................................

Set all Suggested below to highest Values first.  Then later you can lower, one at a time, testing as you go

[b][u]Advanced Timing Control[/u][/b]
tRRD...........................................
tWTR..........................................
tWR............................................
tRFC...........................................
tRTP...........................................
Command Rate (CMD) ....................:2

[u][b]Driving Strength Profiles[/b][/u][b][/b]
Driving Strength ............................

[b]Channel A[/b]
Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
 tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
 tRD Phase2 Adjustment .................:Auto
 tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto 
Twr2wr(Different Rank)...................:Auto 
Twr2rd(Different Rank)...................:Auto 
Trd2wr(Same/Diff Rank)..................:Auto 
Dimm1 Clock Skew Control...............:Auto  ps
Dimm2 Clock Skew Control...............:Auto  ps

[b]Channel B[/b]
Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
 tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
 tRD Phase2 Adjustment .................:Auto
 tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto 
Twr2wr(Different Rank)...................:Auto 
Twr2rd(Different Rank)...................:Auto 
Trd2wr(Same/Diff Rank)..................:Auto 
Dimm1 Clock Skew Control...............:Auto  ps
Dimm2 Clock Skew Control...............:Auto  ps

[b][U]Motherboard Voltage Control[/U][/b][U][/U]
Voltage Type.………... Manual
[b]CPU[/b]
CPU Vcore….……….........................:
CPU Termination…..... 1.200V*.......: <<< Leave
CPU PLL…………………....1.500V*.......: << Please set to stock, Auto overvolts this way to much

CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 

CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 

[b]MCH/ICH[/b]
MCH Core…………….....1.100V...........: << 
MCH Reference….…….0.800V...........; <<< Leave
MCH/DRAM Ref.…......0.900V...........: <<< Leave
ICH I/O……………….....1.550V............: <<< Leave
ICH Core…………...……1.100V............: <<< Leave

[b]DRAM[/b]
DRAM Voltage ……....1.800V............: 
DRAM Termination .…0.900V............: <<< Leave
Channel A Reference 0.900V............: <<< Leave
Channel B Reference 0.900V............: <<< Leave

[b][U]Advanced Settings[/U][/b][U][/U]
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

[b][U]Integrated Peripherals[/U][/b][U][/U]
Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

Have you tried other Versions of GFX Drivers? That is a Nvidia Driver error for sure, but it could also be ram/settings related as to what is causing it though