Tweet
GA-X38-DS4 &
Just want to share, for others who may need it...
Robust Graphics Booster__________ [Auto]
CPU Clock Ratio ________________ [8]
Fine Clock Ratio ________________ [0.5]
CPU Host Clock Control___________ [Enabled]
CPU Frequency__________________ [3.91]
CPU Host Frequency (MHz)________ [460]
PCI Express Frequency (Mhz)______ [100]
C.I.A. 2________________________ [Disabled]
System Memory Multiplier (SPD)____ [2.00D] = 920 MHz memory freq
DRAM Timing Selectable_____SPD __ [Manual]
Performance Enhance = [Standard]
CAS Latency Time________________ [5]
Dram RAS# to CAS# Delay_________ [5]
Dram RAS# Precharge Delay________ [5]
Precharge Delay (tRAS)____________ [15]
ACT to ACT Delay (tRRD)_________ [4]
Rank Write to READ Delay_________ [4]
Write to Precharge Delay__________ [8]
Refresh to ACT Delay_____________ [62]
Read to Precharge Delay__________ [4]
Static tRead Value_______________ [9]
Static tRead Phase Adjust_________ Auto (0)
Command Rate (CMD)_____________ Auto (2)
CPU/PCIEX Clock Driving Control__ [800mV]
CPU Clock Skew Control_________ [normal]
GMCH Clock Skew Control________ [Normal]
System Voltage Control_________ [Manual]
DDR2 OverVoltage Control_______ [+0.3V]
PCI-E OverVoltage Control_______ [+0.15V]
FSB OverVoltage Control_________ [0.20V]
(G)MCH OverVoltage Control______ [+0.3V]
MCH Reference Voltage Control____ [Normal]
DDR Reference Voltage Control____ [Normal]
DDR Termination Voltage Control___ [Normal]
Loadline Calibration _____________ [Enabled]
CPU Voltage Control_____________ [1.4V]-->CPU-Z shows 1.392v@idle and 1.36/1.376v@load
Normal CPU Vcore_______________ [1.25V]
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Disabled]
CPU Enhanced Halt (C1E)................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology.................: [Disabled]
Integrated Peripherals
Legacy USB Storage Detect___________________[Disabled]
Prime95 (24h) +OCCT (8h, then i stopped it) stable.
Thanks to 'godto' for the help
Enjoy
My system
CPU: [email protected] 55c@load
CPU Cooling: OCZ Vendetta 2
Memory: G.Skill 2x2GB DDR2-1066 CL5
GPU: Sapphire Radeon 4870 512MB DDR5
MB: Gigabyte GA-X38-DS4
HDD: Seagate ST3500320AS 500GB + WD 320GB AAKS
PSU: Corsair 520W 40A@12V 520HX
Case: TT Armor Plus MX
OS: Vista Ultimate 64bit SP1
Robust Graphics Booster__________ [Auto]
CPU Clock Ratio ________________ [8]
Fine Clock Ratio ________________ [0.5]
CPU Host Clock Control___________ [Enabled]
CPU Frequency__________________ [3.91]
CPU Host Frequency (MHz)________ [460]
PCI Express Frequency (Mhz)______ [100]
C.I.A. 2________________________ [Disabled]
System Memory Multiplier (SPD)____ [2.00D] = 920 MHz memory freq
DRAM Timing Selectable_____SPD __ [Manual]
Performance Enhance = [Standard]
CAS Latency Time________________ [5]
Dram RAS# to CAS# Delay_________ [5]
Dram RAS# Precharge Delay________ [5]
Precharge Delay (tRAS)____________ [15]
ACT to ACT Delay (tRRD)_________ [4]
Rank Write to READ Delay_________ [4]
Write to Precharge Delay__________ [8]
Refresh to ACT Delay_____________ [62]
Read to Precharge Delay__________ [4]
Static tRead Value_______________ [9]
Static tRead Phase Adjust_________ Auto (0)
Command Rate (CMD)_____________ Auto (2)
CPU/PCIEX Clock Driving Control__ [800mV]
CPU Clock Skew Control_________ [normal]
GMCH Clock Skew Control________ [Normal]
System Voltage Control_________ [Manual]
DDR2 OverVoltage Control_______ [+0.3V]
PCI-E OverVoltage Control_______ [+0.15V]
FSB OverVoltage Control_________ [0.20V]
(G)MCH OverVoltage Control______ [+0.3V]
MCH Reference Voltage Control____ [Normal]
DDR Reference Voltage Control____ [Normal]
DDR Termination Voltage Control___ [Normal]
Loadline Calibration _____________ [Enabled]
CPU Voltage Control_____________ [1.4V]-->CPU-Z shows 1.392v@idle and 1.36/1.376v@load
Normal CPU Vcore_______________ [1.25V]
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Disabled]
CPU Enhanced Halt (C1E)................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology.................: [Disabled]
Integrated Peripherals
Legacy USB Storage Detect___________________[Disabled]
Prime95 (24h) +OCCT (8h, then i stopped it) stable.
Thanks to 'godto' for the help
Enjoy
My system
CPU: [email protected] 55c@load
CPU Cooling: OCZ Vendetta 2
Memory: G.Skill 2x2GB DDR2-1066 CL5
GPU: Sapphire Radeon 4870 512MB DDR5
MB: Gigabyte GA-X38-DS4
HDD: Seagate ST3500320AS 500GB + WD 320GB AAKS
PSU: Corsair 520W 40A@12V 520HX
Case: TT Armor Plus MX
OS: Vista Ultimate 64bit SP1
Comment