This is primarily at lsdmeasap's request that I make my own topic. As you requested mate, here are my current settings...
HDD Smart Capability = disabled
Limit CPUID Max to 3 = disabled
No-Execute Memory protect = enabled
C1E = disabled
TM2 = enabled
EIST = disabled
Virtualization Tech = disabled
Init Display First = PEG
CPU Warning Temp = 70oC
CPU FAN Warning = enabled
SYSTEM FAN 1 Warning = enabled
Smart FAN Control Method = disabled
R.G.B = auto
CPU Clock Ratio = 8x
CPU Host Clock Control = enabled
CPU Host Frequency = 400 mhz
PCI-E Frequency = 100 mhz
CIA2 = disabled
Performance Enhance = standard
System Memory Multiplier = 2.00D
CAS Latency Timer = 4
DRAM RAS# to CAS# Delay = 4
DRAM RAS# precharge = 4
Precharge Delay = 12
ACT to ACT delay = 3
Rank write to read delay = 3
Write to precharge delay = 6
refresh to act delay = 55
read to precharge delay = 3
static tread value = 7
static tread phase adjust = Auto/0
command rate = 2T
System Voltage Control = manual
DDR2 OV Control = +0.30v
PCI-E OV Control = +0.10vl
FSB OV Control = +0.10v
(G)MCH OV Control = +0.200v
CPU Voltage Control = 1.33something volts
Currently, the Vcore on CPU-Z hovers between 1.31v and 1.32v, depending on idle/loading conditions. There have been no hardware changes to anything for the past few months.
HDD Smart Capability = disabled
Limit CPUID Max to 3 = disabled
No-Execute Memory protect = enabled
C1E = disabled
TM2 = enabled
EIST = disabled
Virtualization Tech = disabled
Init Display First = PEG
CPU Warning Temp = 70oC
CPU FAN Warning = enabled
SYSTEM FAN 1 Warning = enabled
Smart FAN Control Method = disabled
R.G.B = auto
CPU Clock Ratio = 8x
CPU Host Clock Control = enabled
CPU Host Frequency = 400 mhz
PCI-E Frequency = 100 mhz
CIA2 = disabled
Performance Enhance = standard
System Memory Multiplier = 2.00D
CAS Latency Timer = 4
DRAM RAS# to CAS# Delay = 4
DRAM RAS# precharge = 4
Precharge Delay = 12
ACT to ACT delay = 3
Rank write to read delay = 3
Write to precharge delay = 6
refresh to act delay = 55
read to precharge delay = 3
static tread value = 7
static tread phase adjust = Auto/0
command rate = 2T
System Voltage Control = manual
DDR2 OV Control = +0.30v
PCI-E OV Control = +0.10vl
FSB OV Control = +0.10v
(G)MCH OV Control = +0.200v
CPU Voltage Control = 1.33something volts
Currently, the Vcore on CPU-Z hovers between 1.31v and 1.32v, depending on idle/loading conditions. There have been no hardware changes to anything for the past few months.
Comment