This is my first time trying to OC this build and am looking for advice on improving from here while keeping in mind I am looking for a safe 24/7 OC. I am not looking to Volt much more but I am sure that there is plenty of OC potential left.
(removed pic to increase page load speed)
Code:
MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster ..................: Auto CPU Clock Ratio ..........................: 10x Fine CPU Clock Ratio .....................: 0.0 CPU Frequency ............................: 3.33GHz (333x10) Clock Chip Control Standard Clock Control CPU Host Clock Control..................: [Enabled] CPU Host Frequency (Mhz) ...............: 333Mhz PCI Express Frequency (Mhz) ............: 100 C.I.A.2 .................................:[Disabled] Advanced Clock Control [Press Enter] CPU Clock Drive...........................: 800 PCI Express Clock Drive...................: 900 CPU Clock Skew (ps).......................: 0 MCH Clock Skew (ps).......................: 0 DRAM Performance Control Performance Enhance....................: [Standard] Extreme Memory Profile (X.M.P.)........: Disabled (G)MCH Frequency Latch.................: [AUTO] System Memory Multiplier ..............: 3.20B Memory Frequency (Mhz) ................: 1066 DRAM Timing Selectable ................: [Manual] Standard Timing Control CAS Latency Time....................... 5 tRCD .................................. 5 tRP'................................... 5 tRAS................................... 15 Advanced Timing Control MemSet Reading tRRD........................................... [AUTO] 4 tWTR........................................... [AUTO] 12 tWR............................................ [AUTO] tRFC........................................... [AUTO] 68 tRTP........................................... [AUTO] 6 Command Rate (CMD) ............................ 2t Driving Strength Profiles Driving Strength ............................ 1066 Channel A Static tRead Value..........................: Auto tRD Phase0 Adjustment.......................: Auto tRD Phase1 Adjustment.......................: Auto tRD Phase2 Adjustment ......................: Auto tRD Phase3 Adjustment.......................: Auto Trd2rd(Different Rank)......................: Auto Twr2wr(Different Rank)......................: Auto Twr2rd(Different Rank)......................: Auto Trd2wr(Same/Diff Rank)......................: Auto Dimm1 Clock Skew Control....................: Auto ps Dimm2 Clock Skew Control....................: Auto ps Channel B Static tRead Value..........................: Auto tRD Phase0 Adjustment.......................: Auto tRD Phase1 Adjustment.......................: Auto tRD Phase2 Adjustment ......................: Auto tRD Phase3 Adjustment.......................: Auto Trd2rd(Different Rank)......................: Auto Twr2wr(Different Rank)......................: Auto Twr2rd(Different Rank)......................: Auto Trd2wr(Same/Diff Rank)......................: Auto Dimm1 Clock Skew Control....................: Auto ps Dimm2 Clock Skew Control....................: Auto ps Motherboard Voltage Control Voltage Type.���... Manual CPU CPU Vcore�.���....... 1.21250V.........: 1.36250V CPU Termination�..... 1.200V*..........: 1.240 CPU PLL�������....1.500V*..............: 1.500 CPU Referen.����....0.760V*.........: Auto MCH/ICH MCH Core�����.....1.100V.............: 1.240 MCH Reference�.��.0.760V.............: Auto MCH/DRAM Ref.�....0.900V.............: Auto ICH I/O������.....1.500V.............: Auto ICH Core����......1.100V.............: Auto DRAM DRAM Voltage ��....1.800V............: 1.980 DRAM Termination .�0.900V............: Auto Channel A Reference 0.900V...........: Auto Channel B Reference 0.900V...........: Auto Advanced BIOS Features Limit CPUID Max. to 3 ........................: [Disabled] No-Execute Memory Protect ....................: [Enabled] CPU Enhanced Halt (C1E) ......................: [Disabled] C2/C2E State Support .........................: [Disabled] x C4/C4E State Support .......................: [Disabled] CPU Thermal Monitor 2 (TM2) ..................: [Enabled] CPU EIST Function ............................: [Disabled]
Comment