hi I am having hardcore stability
Announcement
Collapse
No announcement yet.
ga-ep4-ud3r problem
Collapse
X
-
Re: ga-ep4-ud3r problem
Please give me a link to your ram, and fill this out with what you are using now and I will advise you back some ranges to try >>>
This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours
Code:[b][u]MB Intelligent Tweaker(M.I.T.)[/u][/b] Robust Graphics Booster ...............: CPU Clock Ratio ..........................: Fine CPU Clock Ratio.....................:.0 CPU Frequency ...........................: [b][u]Clock Chip Control [/u][/b] [b][u]Standard Clock Control[/u][/b] CPU Host Clock Control..................: [Enabled] CPU Host Frequency (Mhz) ............: Mhz [B]PCI Express Frequency (Mhz) .........:Set to 100[/B] C.I.A.2 .................................:[Disabled] [b][u]Advanced Clock Control [Press Enter][/u][/b] CPU Clock Drive...........................: <<< PCI Express Clock Drive.................: <<< CPU Clock Skew (ps)....................: <<< MCH Clock Skew (ps)...................: <<< [b][u]DRAM Performance Control[/u][/b][u][/u] [B]Performance Enhance...................: [STANDARD][/B] Extreme Memory Profile (X.M.P.).....: Disabled (G)MCH Frequency Latch...............: [Auto] System Memory Multiplier ..............: Memory Frequency (Mhz) ..............: DRAM Timing Selectable ................: [Manual] [b]Standard Timing Control[/b] CAS Latency Time........................ tRCD ......................................... tRP'........................................... tRAS.......................................... [b][u]Advanced Timing Control[/u][/b] tRRD........................................... tWTR.......................................... tWR............................................ tRFC........................................... tRTP........................................... Command Rate (CMD) ....................:2 [u][b]Driving Strength Profiles[/b][/u][b][/b] Driving Strength ............................ [b]Channel A[/b] Static tRead Value.........................:7-10 tRD Phase0 Adjustment...................:<<< Leave for all below as well tRD Phase1 Adjustment...................:Auto tRD Phase2 Adjustment .................:Auto tRD Phase3 Adjustment..................:Auto Trd2rd(Different Rank)....................:Auto Twr2wr(Different Rank)...................:Auto Twr2rd(Different Rank)...................:Auto Trd2wr(Same/Diff Rank)..................:Auto Dimm1 Clock Skew Control...............:Auto ps Dimm2 Clock Skew Control...............:Auto ps [b]Channel B[/b] Static tRead Value.........................:7-10 tRD Phase0 Adjustment...................:<<< Leave for all below as well tRD Phase1 Adjustment...................:Auto tRD Phase2 Adjustment .................:Auto tRD Phase3 Adjustment..................:Auto Trd2rd(Different Rank)....................:Auto Twr2wr(Different Rank)...................:Auto Twr2rd(Different Rank)...................:Auto Trd2wr(Same/Diff Rank)..................:Auto Dimm1 Clock Skew Control...............:Auto ps Dimm2 Clock Skew Control...............:Auto ps [b][U]Motherboard Voltage Control[/U][/b][U][/U] Voltage Type.………... Manual [b]CPU[/b] CPU Vcore….……….........................: CPU Termination…..... 1.200V*.......: <<< Leave CPU PLL…………………....1.500V*.......: << Please set to stock, Auto overvolts this way to much CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly [b]MCH/ICH[/b] MCH Core…………….....1.100V...........: << MCH Reference….…….0.800V...........; <<< Leave MCH/DRAM Ref.…......0.900V...........: <<< Leave ICH I/O……………….....1.550V............: <<< Leave ICH Core…………...……1.100V............: <<< Leave [b]DRAM[/b] DRAM Voltage ……....1.800V............: DRAM Termination .…0.900V............: <<< Leave Channel A Reference 0.900V............: <<< Leave Channel B Reference 0.900V............: <<< Leave [b][U]Advanced Settings[/U][/b][U][/U] Limit CPUID Max. to 3.....................: [Disabled] No-Execute Memory Protect............: [Enabled] CPU Enhanced Halt (C1E)................: [Disabled] C2/C2E State Support....................: [Disabled] x C4/C4E State Support..................: [Disabled] CPU Thermal Monitor 2(TM2) ...........: [Enabled] CPU EIST Function.........................: [Disabled] Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC [b][U]Integrated Peripherals[/U][/b][U][/U] Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB
Comment
-
Re: ga-ep4-ud3r problem
full bios spec ;
MB Intelligent Tweaker(M.I.T.)<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p></PRE>
Robust Graphics Booster ...............: auto <o:p></o:p></PRE>
CPU Clock Ratio ..........................: 8x <o:p></o:p></PRE>
Fine CPU Clock Ratio.....................:.+0.0<o:p></o:p></PRE>
CPU Frequency ...........................: 2.66ghz 333x8<o:p></o:p></PRE>
<o:p> </o:p></PRE>
<o:p> </o:p></PRE>
Clock Chip Control <o:p></o:p></PRE>
Standard Clock Control<o:p></o:p></PRE>
CPU Host Clock Control..................: [disablea] <o:p></o:p></PRE>
CPU Host Frequency (Mhz) ............: 333<o:p></o:p></PRE>
PCI Express Frequency (Mhz) .........: 100<o:p></o:p></PRE>
<o:p> </o:p></PRE>
C.I.A.2 .................................:[Disabled]<o:p></o:p></PRE>
<o:p> </o:p></PRE>
<o:p> </o:p></PRE>
Advanced Clock Control [Press Enter]<o:p></o:p></PRE>
<?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" /><st1:Street w:st="on"><st1:address w:st="on">CPU Clock Drive</st1:address></st1:Street>...........................: 800 mv<o:p></o:p></PRE>
<st1:Street w:st="on"><st1:address w:st="on">PCI Express Clock Drive</st1:address></st1:Street>.................: 900 mv<o:p></o:p></PRE>
CPU Clock Skew (ps)....................: ops <o:p></o:p></PRE>
MCH Clock Skew (ps)...................: ops<o:p></o:p></PRE>
<o:p> </o:p></PRE>
<o:p> </o:p></PRE>
DRAM Performance Control<o:p></o:p></PRE>
Performance Enhance...................: [STANDARD]<o:p></o:p></PRE>
Extreme Memory Profile (X.M.P.).....: auto <o:p></o:p></PRE>
(G)MCH Frequency Latch...............: [Auto]<o:p></o:p></PRE>
System Memory Multiplier ..............: auto <o:p></o:p></PRE>
Memory Frequency (Mhz) ..............: 1066 1066<o:p></o:p></PRE>
DRAM Timing Selectable ................: [auto]<o:p></o:p></PRE>
<o:p> </o:p></PRE>
Standard Timing Control<o:p></o:p></PRE>
CAS Latency Time........................5 auto <o:p></o:p></PRE>
tRCD .........................................5 auto<o:p></o:p></PRE>
tRP'...........................................5 auto<o:p></o:p></PRE>
tRAS..........................................15 auto<o:p></o:p></PRE>
<o:p> </o:p></PRE>
Advanced Timing Control<o:p></o:p></PRE>
tRRD........................................... 4 auto<o:p></o:p></PRE>
tWTR.......................................... 4 auto<o:p></o:p></PRE>
tWR............................................ 13 auto<o:p></o:p></PRE>
tRFC........................................... 68 auto<o:p></o:p></PRE>
tRTP........................................... 4 auto<o:p></o:p></PRE>
Command Rate (CMD) ....................: 0 auto<o:p></o:p></PRE>
<o:p> </o:p></PRE>
Driving Strength Profiles<o:p></o:p></PRE>
Driving Strength ............................<o:p></o:p></PRE>
<o:p> </o:p></PRE>
Channel A<o:p></o:p></PRE>
Static tRead Value.........................: 6 auto<o:p></o:p></PRE>
tRD Phase0 Adjustment...................: 0 auto<o:p></o:p></PRE>
tRD Phase1 Adjustment...................: 0 Auto<o:p></o:p></PRE>
tRD Phase2 Adjustment .................: 0 Auto<o:p></o:p></PRE>
tRD Phase3 Adjustment..................: 0 Auto<o:p></o:p></PRE>
Trd2rd(Different Rank)....................: 8 Auto <o:p></o:p></PRE>
Twr2wr(Different Rank)...................: 8 Auto <o:p></o:p></PRE>
Twr2rd(Different Rank)...................: 7 Auto <o:p></o:p></PRE>
Trd2wr(Same/Diff Rank)..................: 9 Auto <o:p></o:p></PRE>
Dimm1 Clock Skew Control...............: Auto <o:p></o:p></PRE>
Dimm2 Clock Skew Control...............: Auto <o:p></o:p></PRE>
</PRE>
<o:p> </o:p></PRE>
Channel B<o:p></o:p></PRE>
Static tRead Value.........................: 6 auto <o:p></o:p></PRE>
tRD Phase0 Adjustment...................: o auto<o:p></o:p></PRE>
tRD Phase1 Adjustment...................: 0 Auto<o:p></o:p></PRE>
tRD Phase2 Adjustment .................: 0 Auto<o:p></o:p></PRE>
tRD Phase3 Adjustment..................: 0 Auto<o:p></o:p></PRE>
Trd2rd(Different Rank)....................: 8 Auto <o:p></o:p></PRE>
Twr2wr(Different Rank)...................: 8 Auto <o:p></o:p></PRE>
Twr2rd(Different Rank)...................: 7 Auto <o:p></o:p></PRE>
Trd2wr(Same/Diff Rank)..................: 9 Auto <o:p></o:p></PRE>
Dimm1 Clock Skew Control...............: Auto <o:p></o:p></PRE>
Dimm2 Clock Skew Control...............: Auto <o:p></o:p></PRE>
</PRE>
<o:p></o:p></PRE>
<o:p> </o:p></PRE>
Motherboard Voltage Control<o:p></o:p></PRE>
</PRE>
CPU<o:p></o:p></PRE>
<o:p></o:p></PRE>
</PRE>
</PRE>
</PRE>
<o:p> </o:p></PRE>
</PRE>
<o:p> </o:p></PRE>
MCH/ICH<o:p></o:p></PRE>
</PRE>
</PRE>
</PRE>
</PRE>
</PRE>
<o:p> </o:p></PRE>
DRAM<o:p></o:p></PRE>
</PRE>
</PRE>
</PRE>
</PRE>
<o:p> </o:p></PRE>
Advanced Settings<o:p></o:p></PRE>
Limit CPUID Max. to 3.....................: [Disabled]<o:p></o:p></PRE>
No-Execute Memory Protect............: [Enabled]<o:p></o:p></PRE>
CPU Enhanced Halt (C1E)................: [enabled]<o:p></o:p></PRE>
CPU Thermal Monitor 2(TM2) ...........: [Enabled]<o:p></o:p></PRE>
CPU EIST Function.........................: [enabled]<o:p></o:p></PRE>
Virtualization Technology................: [Enabled] <o:p></o:p></PRE>
Integrated Peripherals<o:p></o:p></PRE>
Comment
-
Re: ga-ep4-ud3r problem
I'm going to try it. I'ved tryed one by one on each slot and there is not a a problem but then when I use 2,3, or 4 memorys the system goes freeze......Last edited by autosport210; 11-28-2008, 05:02 PM.
Comment
Comment