Memory auto settings incorrect

[concordecomputer]

Specs:

E8400
Gigabyte GA-EP45-DS3
Corsair 2X 1GB CM2X1024-6400C4 4-4-4-12 and 2.1V

Auto settings in the bios for this memory on this board say 5-5-5-18 and 1.8V. Should i leave the way it is or change to 4-4-4-12 and 2.1V.

Memtest passes 5 times with auto settings.
<!-- / message -->

<!-- controls -->

[Lsdmeasap]

Re: Memory auto settings incorrect

I would change them and be sure to set performance enhance to standard. You can likely use 2.0 on your ram voltage as well, 2.1 is just the warrantied amount