New setup, new to OC, starting point?

[BoaZ2020]

So I recently purchased a new setup I'm pretty happy with. I'd like to start learning about over clocking, specifically I was wondering if anyone can post some suggested settings of where to start.

Here's my system:

Mobo: Gigabyte GA-EP45-UD3P
CPU: Intel Core 2 Quad Q9550
RAM: 8GB G.SKILL DDR2 1000 ([email protected], 4x2GB)
Video: EVGA NVIDIA GeForce GTX260 896MB 448-bit GDDR3 PCIe 2.0 x16
HDD: 3 x Seagate Barracuda ES 250GB (RAID 0)
PSU: Corsair 620HX
HSF: Zalman 9500A
OS: Windows XP Pro x64

Any insight or advice would be greatly appreciated.

[godto]

Re: New setup, new to OC, starting point?

http://forums.tweaktown.com/f69/ga-ep45-ud3p-8-gig-corsair-dominator-4x2gig-8500c5df-28410/

that is my set up ... but read in here there are quite few with your setting ... and everychip and board are different .. mine the Vcore little high ... most peoples seem to do under 1.35 vcore

[Lsdmeasap]

Re: New setup, new to OC, starting point?

Did you get all stable at stock yet? If not for sure do that first and save that as a BIOS Profile (F11 is save on the MAIN Page and F12 is load)

Then please post what speed you would like to run at and I will try to make you some suggestions