If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
GA-Z68XP-UD5
Hi there, I have successfully install U1a bios.
Everything seems to be working well, even USB3 on Mac OS X 10.8.3, but I keep getting my console flooded with:
kernel[0]: FireWire GUID 0000000000000000 is invalid!
I've did search google, tonymac, and more before coming here for help. But I can't find any clue on how to fix this.
Ant bright ideas on how to fix this?
How did ya update it? I have fash yo U1a and my moherboard is breaks. It wont boot with black screen and reboot after 10-15 sec. I forced to roll back to BIOS with boot from reserved ROM.
Btw about BIOS ROMS. Where to look at changing history? I have F6 from official site and there is already F7a.
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
i got x570 Elite (no wifi). I got bunch of WHEA with F35b. I've change some settings but i could not remove errors so i went back to F35a with no error...This current setting (co etc) have not changed much since like F30. I spent about 30 min and back to F35a and all is fine again (i need the machine for my work).
I had many issues while running x570 master with a 5900X. Many bsods during gaming with the famous WHEA kernel error. I was running FCLK 1800 thanks to running teamData 3600Cl14 (non oc, only xmp).
CPU was kinda stable during F33c but was not allowed to use any 'exotic' feature like PBO, curve optimizer or ryzen master auto overclock. F33 was not stable. Corsair AIO got frequent disconnects cause it was connected to onboard usb. usb2 ports at the back were not usable. This was not a big issue as there were plenty of usb3 ports.
I RMA'ed my CPU and today it got approved to be replaced. Will keep you posted if new CPU is also 'bad' or if board is bad. Hard to test which component contributes to the instability.
Btw, does stasio have donation button? He deserves more than 1 beer.
The fun part is that I build my friend a very similar system (cpu and mobo ,psu and nvme), slightly different ram. He runs it perfectly on F33c bios ( not using usb2 ports ofc)
Hi Maniac,
I made some mod for somebody.... (and BIOS from Rev.2.0),so I fill,I can share with you.
At present time:
Rev.1.0 - U1a - 05/09/2012
Rev.2.0 -Ua9 - 03/06/2013
stasio Anything new for Z590 AORUS PRO AX (rev 1)? Current release F6d seems unstable. Is the currently posted beta F6 newer? I seem to remember an F6e posted at one time. Thanks as always!
Hello !! In about 2-3 weeks from now I will buy the b550 aorus elite V2 and I have 2 questions about the bios.
What the most stable recent bios ? I know the f13g is a beta but it is good enough to give a try or better go for the f12 until they release a stable f13. And what about the f13j, it is unofficial or not, because in gigabyte's site there is only the f13g.
And secondly if I install a beta bios (f13g) can I roll back to f12 or whatever because I read that the f13g have a checksum but I'm not sure what exactly is the checksum if that makes any sense....
Comment