So I've been doing lots of trial, and lots of error. I'm ending day two with no sign of system stability. I get to pass #4 in memtest86+ v2.01, and the machine locks up. Right now I'm just looking for stability with stock settings.
Intel Core2Duo E8500 E0
GA-EP45-DS3L rev 1.0 f9
2x2GB Patriot PC800 (PDC24G600LLK)
http://www.patriotmem.com/products/d...&id=658&type=1
Nvidia 8800GT
SATAII 320gig
1x cdrom
535W enermax with plenty of juice.
And my BIOS stettings (exactly how it looks)...
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster..................: [Fast]
CPU Clock Ratio .........................: [9x]
Fine CPU Clock Ratio.....................: [.5]
CPU Frequency ...........................: 3.16
Clock Chip Control
Standard Clock Control
CPU Host Clock Control...................: [Disabled]
CPU Host Frequency (Mhz) ................: [333]
PCI Express Frequency (Mhz) .............: [100]
C.I.A.2 .................................:[Disabled]
Advanced Clock Control [Press Enter]
CPU Clock Drive..........................: [800mV]
PCI Express Clock Drive..................: [900mV]
CPU Clock Skew (ps)......................: [0ps] (defaul)
MCH Clock Skew (ps)......................: [100ps]
DRAM Performance Control
Performance Enhance......................: [STANDARD]
Extreme Memory Profile (X.M.P.)..........: [Disabled]
(G)MCH Frequency Latch...................: [333]
System Memory Multiplier ................: [2.40B]
Memory Frequency (Mhz) ..................: 800
DRAM Timing Selectable ..................: [Manual]
Standard Timing Control
CAS Latency Time.........................: 5
tRCD ....................................: 5
tRP......................................: 5
tRAS.....................................: 15
Advanced Timing Control
tRRD.....................................: 3 [5]
tWTR.....................................: 3 [12]
tWR......................................: 6 [14]
tRFC.....................................: 52 [60]
tRTP.....................................: 3 [6]
Command Rate (CMD) ......................: 0 [1]
Driving Strength Profiles
Driving Strength ........................: [800MHz]
Everything Else ........................: [Auto]
Channel A
Static tRead Value.......................: 7 [9]
tRD Phase0 Adjustment....................: [Auto]
tRD Phase1 Adjustment....................: [Auto]
tRD Phase2 Adjustment ...................: [Auto]
tRD Phase3 Adjustment....................: [Auto]
Trd2rd(Different Rank)...................: [Auto]
Twr2wr(Different Rank)...................: [Auto]
Twr2rd(Different Rank)...................: [Auto]
Trd2wr(Same/Diff Rank)...................: [Auto]
Dimm1 Clock Skew Control.................: [Auto]
Dimm2 Clock Skew Control.................: [Auto]
Channel B................................: Mirrors Channel A
Motherboard Voltage Control
Voltage Type....... Manual
CPU
CPU Vcore................................: [1.25V]
CPU Termination...... 1.200V.............: 1.2V [Auto]
CPU PLL...............1.550V.............: 1.55V [Auto]
CPU Referen...........0.805V.............: 0.805V [Auto]
MCH/ICH
MCH Core..............1.100V.............: [Auto]
MCH Reference.........0.760V.............: [Auto]
ICH I/O...............1.550V.............: [Auto]
DRAM
DRAM Voltage .........1.800V.............: [1.8V]
Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect.................: [Enabled]
CPU Enhanced Halt (C1E)...................: [Disabled]
C2/C2E State Support......................: [Disabled]
x C4/C4E State Support....................: [Disabled]
CPU Thermal Monitor 2(TM2) ...............: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology.................: [Disabled]
Integrated Peripherals
Legacy USB Storage Detect ..............[Disabled]
Man, my OCD is going nuts.. that looked perfect in vi :(
-- actually.. I just made an adjustment and the SOB is at 20 minutes, and into test #6. it used to lock up half way through test #4. I believe the only difference between what I've posted up above and what it's set to right now is
DRAM Voltage .........1.800V.............: [2.1V]
Well, I'm going to let this run, and post this anyway. Just in case it freezes while I'm sleeping. Any input on my settings would also be greatly appreciated from you, who are more knowledgeable than I.
Intel Core2Duo E8500 E0
GA-EP45-DS3L rev 1.0 f9
2x2GB Patriot PC800 (PDC24G600LLK)
http://www.patriotmem.com/products/d...&id=658&type=1
Nvidia 8800GT
SATAII 320gig
1x cdrom
535W enermax with plenty of juice.
And my BIOS stettings (exactly how it looks)...
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster..................: [Fast]
CPU Clock Ratio .........................: [9x]
Fine CPU Clock Ratio.....................: [.5]
CPU Frequency ...........................: 3.16
Clock Chip Control
Standard Clock Control
CPU Host Clock Control...................: [Disabled]
CPU Host Frequency (Mhz) ................: [333]
PCI Express Frequency (Mhz) .............: [100]
C.I.A.2 .................................:[Disabled]
Advanced Clock Control [Press Enter]
CPU Clock Drive..........................: [800mV]
PCI Express Clock Drive..................: [900mV]
CPU Clock Skew (ps)......................: [0ps] (defaul)
MCH Clock Skew (ps)......................: [100ps]
DRAM Performance Control
Performance Enhance......................: [STANDARD]
Extreme Memory Profile (X.M.P.)..........: [Disabled]
(G)MCH Frequency Latch...................: [333]
System Memory Multiplier ................: [2.40B]
Memory Frequency (Mhz) ..................: 800
DRAM Timing Selectable ..................: [Manual]
Standard Timing Control
CAS Latency Time.........................: 5
tRCD ....................................: 5
tRP......................................: 5
tRAS.....................................: 15
Advanced Timing Control
tRRD.....................................: 3 [5]
tWTR.....................................: 3 [12]
tWR......................................: 6 [14]
tRFC.....................................: 52 [60]
tRTP.....................................: 3 [6]
Command Rate (CMD) ......................: 0 [1]
Driving Strength Profiles
Driving Strength ........................: [800MHz]
Everything Else ........................: [Auto]
Channel A
Static tRead Value.......................: 7 [9]
tRD Phase0 Adjustment....................: [Auto]
tRD Phase1 Adjustment....................: [Auto]
tRD Phase2 Adjustment ...................: [Auto]
tRD Phase3 Adjustment....................: [Auto]
Trd2rd(Different Rank)...................: [Auto]
Twr2wr(Different Rank)...................: [Auto]
Twr2rd(Different Rank)...................: [Auto]
Trd2wr(Same/Diff Rank)...................: [Auto]
Dimm1 Clock Skew Control.................: [Auto]
Dimm2 Clock Skew Control.................: [Auto]
Channel B................................: Mirrors Channel A
Motherboard Voltage Control
Voltage Type....... Manual
CPU
CPU Vcore................................: [1.25V]
CPU Termination...... 1.200V.............: 1.2V [Auto]
CPU PLL...............1.550V.............: 1.55V [Auto]
CPU Referen...........0.805V.............: 0.805V [Auto]
MCH/ICH
MCH Core..............1.100V.............: [Auto]
MCH Reference.........0.760V.............: [Auto]
ICH I/O...............1.550V.............: [Auto]
DRAM
DRAM Voltage .........1.800V.............: [1.8V]
Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect.................: [Enabled]
CPU Enhanced Halt (C1E)...................: [Disabled]
C2/C2E State Support......................: [Disabled]
x C4/C4E State Support....................: [Disabled]
CPU Thermal Monitor 2(TM2) ...............: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology.................: [Disabled]
Integrated Peripherals
Legacy USB Storage Detect ..............[Disabled]
Man, my OCD is going nuts.. that looked perfect in vi :(
-- actually.. I just made an adjustment and the SOB is at 20 minutes, and into test #6. it used to lock up half way through test #4. I believe the only difference between what I've posted up above and what it's set to right now is
DRAM Voltage .........1.800V.............: [2.1V]
Well, I'm going to let this run, and post this anyway. Just in case it freezes while I'm sleeping. Any input on my settings would also be greatly appreciated from you, who are more knowledgeable than I.
Comment