Re: Is it as simple as timing my EP45-DS3R with Mushkins
Currently about 50% of the time I get a BSOD at startup and about 25% of the time I shutdown I get a BSOD. Once in a great while I get bumped to desktop from Battlefield 2. A new thing I noticed is sometimes in videos it switches to slow motion then returns to normal speed…..
Lsdmeasap, I really appreciate the help and I would love to know what all these timings do, working on that. Is there a post that details the best course of action in tweaking or troubleshooting? For instance, should I play with the memory multiplier before I play with the drive strength? Also, any suggestions to correct my current issues? My plan now is to get my comp running smoothly then try to OC it just a little bit to teach myself how all these timings come into play…
Thanks again
THESE ARE MY CURRENT SETTINGS
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: AUTO
CPU Clock Ratio ..........................: 9
Fine CPU Clock Ratio.....................:.0
CPU Frequency ...........................: 3Ghz (333X9)
Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 333Mhz
PCI Express Frequency (Mhz) .........:Set to 100
C.I.A.2 .................................:[Disabled]
Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: <<< 800
PCI Express Clock Drive.................: <<< 900
CPU Clock Skew (ps)....................: <<< 0
MCH Clock Skew (ps)...................: <<< 150
DRAM Performance Control
Performance Enhance...................: [STANDARD]
Extreme Memory Profile (X.M.P.).....: Disabled
(G)MCH Frequency Latch...............: [333] << Set voltages and Static Tread and this and then save/reboot and set the rest and save and shut down and put in the second stick
System Memory Multiplier ..............: 2.0
Memory Frequency (Mhz) ..............: 800 ?? READS 800 667 I CANT ADJUST
DRAM Timing Selectable ................: [Manual]
Standard Timing Control
CAS Latency Time........................5
tRCD .........................................5
tRP'...........................................5
tRAS..........................................18
Advanced Timing Control
tRRD...........................................5
tWTR..........................................12
tWR............................................14
tRFC...........................................62
tRTP...........................................7
Command Rate (CMD) ....................:2
Driving Strength Profiles
Driving Strength ............................1066 for both A and B
Channel A
Static tRead Value.........................:10
tRD Phase0 Adjustment...................:<<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps
DDR Write Training………………………………:Auto
CHANNEL A sub category
Data driving pull up level channel………….AUTO
CMD driving pull up level channel………….AUTO
CTRL driving pull up level channel………….AUTO
CLK driving pull up level channel………….AUTO
Data driving pull down level channel………….AUTO
CMD driving pull down level channel………….AUTO
CTRL driving pull down level channel………….AUTO
CLK driving pull down level channel………….AUTO
Channel B
Static tRead Value.........................:10
tRD Phase0 Adjustment...................:<<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto ?? DEFAULTS TO 11 AUTO NOT A CHOICE FOR ANY OF THESE
Twr2wr(Different Rank)...................:Auto ?? DEFAULTS TO 15
Twr2rd(Different Rank)...................:Auto ?? DEFAULTS TO 7
Trd2wr(Same/Diff Rank)..................:Auto ?? DEFAULTS TO 15
Dimm1 Clock Skew Control...............:Auto ps ?? DEFAULTS TO -700
Dimm2 Clock Skew Control...............:Auto ps ?? DEFAULTS TO +600
DDR Write Training………………………………:Auto
CHANNEL A sub category
Data driving pull up level channel………….-1
CMD driving pull up level channel………….-1
CTRL driving pull up level channel………….-1
CLK driving pull up level channel………….+7
Data driving pull down level channel………….-3
CMD driving pull down level channel………….-2
CTRL driving pull down level channel………….-1
CLK driving pull down level channel………….-6
Motherboard Voltage Control
Voltage Type.………... Manual
CPU
CPU Vcore….……….........................:Auto
CPU Termination…..... 1.200V*.......: <<< Leave
CPU PLL…………………....1.500V*.......: <<< Leave
CPU Referen.…………....0.755V*.......: <<< 0.760
CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) ?? THERE IS NONE
MCH/ICH
MCH Core…………….....1.100V...........: << 1.2
MCH Reference….…….0.800V...........; <<< Leave
MCH/DRAM Ref.…......0.900V...........: <<< Leave
ICH I/O……………….....1.550V............: 1.50
ICH Core…………...……1.100V............: I don’t have this line………
DRAM
DRAM Voltage ……....1.800V............: 2.1
DRAM Termination .…0.900V............: <<< Leave
Channel A Reference 0.900V............: <<< Leave
Channel B Reference 0.900V............: <<< Leave
Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
Integrated Peripherals
Legacy USB Storage Detect ..............[ENABLED] *Note* Must be enabled to flash from USB
MY PC HEALTH STATUS IS AS FOLLOWS
These items are not adjustable but thought might help….not sure if my powere supply is weak due to voltage and if that effects my settings
VCore 1.140V
DDR18V 2.080V
+3.3V 3.296V
+12V 11.795V
Sys Temp 39C
CPU Temp 38V
Currently about 50% of the time I get a BSOD at startup and about 25% of the time I shutdown I get a BSOD. Once in a great while I get bumped to desktop from Battlefield 2. A new thing I noticed is sometimes in videos it switches to slow motion then returns to normal speed…..
Lsdmeasap, I really appreciate the help and I would love to know what all these timings do, working on that. Is there a post that details the best course of action in tweaking or troubleshooting? For instance, should I play with the memory multiplier before I play with the drive strength? Also, any suggestions to correct my current issues? My plan now is to get my comp running smoothly then try to OC it just a little bit to teach myself how all these timings come into play…
Thanks again
THESE ARE MY CURRENT SETTINGS
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: AUTO
CPU Clock Ratio ..........................: 9
Fine CPU Clock Ratio.....................:.0
CPU Frequency ...........................: 3Ghz (333X9)
Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 333Mhz
PCI Express Frequency (Mhz) .........:Set to 100
C.I.A.2 .................................:[Disabled]
Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: <<< 800
PCI Express Clock Drive.................: <<< 900
CPU Clock Skew (ps)....................: <<< 0
MCH Clock Skew (ps)...................: <<< 150
DRAM Performance Control
Performance Enhance...................: [STANDARD]
Extreme Memory Profile (X.M.P.).....: Disabled
(G)MCH Frequency Latch...............: [333] << Set voltages and Static Tread and this and then save/reboot and set the rest and save and shut down and put in the second stick
System Memory Multiplier ..............: 2.0
Memory Frequency (Mhz) ..............: 800 ?? READS 800 667 I CANT ADJUST
DRAM Timing Selectable ................: [Manual]
Standard Timing Control
CAS Latency Time........................5
tRCD .........................................5
tRP'...........................................5
tRAS..........................................18
Advanced Timing Control
tRRD...........................................5
tWTR..........................................12
tWR............................................14
tRFC...........................................62
tRTP...........................................7
Command Rate (CMD) ....................:2
Driving Strength Profiles
Driving Strength ............................1066 for both A and B
Channel A
Static tRead Value.........................:10
tRD Phase0 Adjustment...................:<<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps
DDR Write Training………………………………:Auto
CHANNEL A sub category
Data driving pull up level channel………….AUTO
CMD driving pull up level channel………….AUTO
CTRL driving pull up level channel………….AUTO
CLK driving pull up level channel………….AUTO
Data driving pull down level channel………….AUTO
CMD driving pull down level channel………….AUTO
CTRL driving pull down level channel………….AUTO
CLK driving pull down level channel………….AUTO
Channel B
Static tRead Value.........................:10
tRD Phase0 Adjustment...................:<<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto ?? DEFAULTS TO 11 AUTO NOT A CHOICE FOR ANY OF THESE
Twr2wr(Different Rank)...................:Auto ?? DEFAULTS TO 15
Twr2rd(Different Rank)...................:Auto ?? DEFAULTS TO 7
Trd2wr(Same/Diff Rank)..................:Auto ?? DEFAULTS TO 15
Dimm1 Clock Skew Control...............:Auto ps ?? DEFAULTS TO -700
Dimm2 Clock Skew Control...............:Auto ps ?? DEFAULTS TO +600
DDR Write Training………………………………:Auto
CHANNEL A sub category
Data driving pull up level channel………….-1
CMD driving pull up level channel………….-1
CTRL driving pull up level channel………….-1
CLK driving pull up level channel………….+7
Data driving pull down level channel………….-3
CMD driving pull down level channel………….-2
CTRL driving pull down level channel………….-1
CLK driving pull down level channel………….-6
Motherboard Voltage Control
Voltage Type.………... Manual
CPU
CPU Vcore….……….........................:Auto
CPU Termination…..... 1.200V*.......: <<< Leave
CPU PLL…………………....1.500V*.......: <<< Leave
CPU Referen.…………....0.755V*.......: <<< 0.760
CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) ?? THERE IS NONE
MCH/ICH
MCH Core…………….....1.100V...........: << 1.2
MCH Reference….…….0.800V...........; <<< Leave
MCH/DRAM Ref.…......0.900V...........: <<< Leave
ICH I/O……………….....1.550V............: 1.50
ICH Core…………...……1.100V............: I don’t have this line………
DRAM
DRAM Voltage ……....1.800V............: 2.1
DRAM Termination .…0.900V............: <<< Leave
Channel A Reference 0.900V............: <<< Leave
Channel B Reference 0.900V............: <<< Leave
Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
Integrated Peripherals
Legacy USB Storage Detect ..............[ENABLED] *Note* Must be enabled to flash from USB
MY PC HEALTH STATUS IS AS FOLLOWS
These items are not adjustable but thought might help….not sure if my powere supply is weak due to voltage and if that effects my settings
VCore 1.140V
DDR18V 2.080V
+3.3V 3.296V
+12V 11.795V
Sys Temp 39C
CPU Temp 38V
Comment